Used Installed for sale (9,016)

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Knjdpfez Tf D Rjx Anuec Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Knedpfsz I Tt Iox Anusc Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: good (used), For sale: CRATHERN, PERONDI IA630, with a capacity of 900. Knodpfoz Sat Eox Anuoc

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RADEMAKER / RONDO Topline ASTec.W industrial line – Production of layered and filled products Complete RADEMAKER / RONDO industrial line for sheeting, gauging, shaping, filling, and cutting dough products. The equipment was previously used for the industrial production of salmon en croûte. Thanks to its modular design and numerous workstations, it can be adapted to other pastry, viennoiserie, and savory or sweet layered product productions, subject to the necessary tooling and adaptations. 1. RADEMAKER Block Processor – 2006 Industrial equipment designed for the gradual reduction of dough blocks into a homogeneous strip, particularly for processing layered dough blocks. Type: Block Processor Year: 2006 Serial number: 280053 Working width: 650 mm Belt width: 650 mm Weight: 1,725 kg Power supply: 240/415 V, three-phase, 50 Hz, 17 A Documented dimensions: 6,000 × 1,400 × 2,850 mm 2. RONDO Topline ASTec.W Industrial line for shaping and preparing filled products. Model: Topline ASTec.W Line reference: D2147 Kneds Abz D Iopfx Anuec Manufacturer documentation: edition 01/2012 ASTec hygienic design adapted for wet cleaning. Documented composition: Dough feeding and conveying belts. Two RONDO flour dusting devices. RONDO laminator, working width 740 mm, belt 700 mm. 15-meter industrial shaping table, 700 mm belt, with marking, cutting, and spraying devices. RONDO Rondofiller dosing unit for filling application. Overlay conveyor for working with two layers of dough. Gauging unit. RONDO ZST600 cutting station. RONDO station, model ZKWA605A.A, year 2011, machine number D1221401, working width 660 mm. RONDO guillotine, model ZGEM700W.A, year 2009, machine number C9273305, with documented tooling of five 80 × 125 mm dies. Dough scrap recovery system. Electrical control cabinet and Siemens operating interface. 3. Applications The line was used for the production of products based on salmon wrapped in dough. It also offers possibilities for adaptation to various layered products, turnovers, pastries, filled specialties, and preparations involving two layers of dough. Other applications can be considered depending on the cutting, shaping, and dosing tools available or to be installed. 4. General characteristics Manufacturers: RADEMAKER / RONDO Years of major equipment: 2006, 2009, and 2011 Total length of the documented configuration: approximately 24 meters Documented maximum width: approximately 2 meters Documented maximum height: approximately 2.85 meters Width of production conveyors: up to 700 mm depending on the section Technical documentation and manufacturer's manuals available. Industrial line consisting of several modules that can be considered for adaptation to other productions. The exact composition, available accessories, and production possibilities must be confirmed during technical inspection.

Condition: used, Year of construction: 2007, working width: 1,650 mm, compressed air connection: 6 bar, roll diameter: 200 mm, Foliostar coupling machine with collating unit and manual collection. Ksdpfxszxp Das Anuonc

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00734, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 Kjdpfx Ae Adqw Nonusnc RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: good (used), PUMP AND VALVE ASSEMBLY FROM A WOOD TREATMENT AUTOCLAVE For sale, a complete pump assembly originating from an industrial wood treatment plant using an autoclave. The set was used in a vacuum-pressure wood treatment plant. The assembly includes, among other things: - a large industrial pump with an electric motor, - an additional vertical pump, - process tanks, - an extensive piping system, - flanged valves, - pneumatically controlled valves, - automation and control elements, - sensors and measuring equipment, - a steel support frame. The entire assembly is a component of the technological installation of the autoclave for wood treatment. This type of system is used to carry out the individual stages of the impregnation process, including vacuum creation, transport of the impregnating agent, and the pressure phase. In industrial impregnation plants, separate vacuum pumps, pressure pumps, and circulation/transfer pumps are used. The components bear markings indicating the manufacturers of the individual parts, including Sulzer and Actreg/Actreg Valves. Used, industrial condition. Visible signs of use, wear on the paint coating, and localized surface corrosion. Sold as seen in the photos. Knjdpjz Hrnbefx Anuoc Individual components are not sold separately – the offer applies to the entire assembly shown. Inspection is possible on-site before purchase. Due to its size and weight, collection is required or transport must be arranged by the buyer.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 55, working width: 600 mm, compressed air connection: 6 bar, type of input current: AC, total width: 2,250 mm, total length: 7,220 mm, total height: 1,840 mm, stack height: 500 mm, overall weight: 3,000 kg, Equipment: CE marking, PERONDI C800 laminating machine and PERONDI R4L 600 in good condition, available for sale. The sale also includes the following equipment, providing a complete and versatile production setup: Hot-melt glue system Feeder Vacuum belt Pressing rollers All included equipment has been part of the production setup and is offered together with the machines. The equipment has been well maintained and carefully operated and is in good condition. Machine highlights: Manufacturer: PERONDI Good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment Knodpfez Hm Ntsx Anuec This is an attractive opportunity to acquire a well-maintained PERONDI C800 and PERONDI R4L 600 laminator with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: used, power 298 kW Knodpfx Anez Tff Usujc gas burner 3 x 400V, 50 Hz dimensions (l x w x h ) : ± 1.700 x 1.200 x 2.200 mm in good condition + Pump

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir Kodpfx Aoz Slmqenuonc • Manufacturer's manual • Accessories as shown in the photos

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total width: 4,600 mm, total length: 9,100 mm, total height: 3,000 mm, overall weight: 40,500 kg, Double-production solar panel laminating machine This laminator is used to produce solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under pressure and temperature. Kedpfxjzrdhgj Anujnc The lamination process is carried out under vacuum, preventing the inclusion of undesirable entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be viewed in operation.

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Kodpoz Slxgofx Anusnc Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Year of construction: 2009, condition: excellent (used), For Sale: Complete yeast installation from Allgist Bruggeman Year of construction: 2009 Capacity per tank: 10,000 liters Commissioned by: Packo Inox Included: - 2x insulated stainless steel yeast tanks - Fully automatic control system - Double ring line - Cooling group with ice storage - Refrigerant installation + vessel - Pure water tank 2,000 liters - Recovered water tank / disinfection tank 500 liters - Compressed air tank / buffer vessel 500 liters - Caustic tank 650 liters Ksdpfxey Sn Uto Anuenc - CIP installation with buffer vessel, recovery vessel, and caustic vessel with automatic preparation - Filling hose integrated into the installation - Maximum yeast recovery during cleaning cycles Full documentation available. Please feel free to contact us if you have any questions. Available immediately, viewing on site is possible. Kind regards, Leo Holland

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag Knjdpfxoz Slxmo Anuoc The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: ready for operation (used), functionality: fully functional, table width: 1,030 mm, total length: 2,400 mm, total width: 1,800 mm, total height: 2,100 mm, overall weight: 700 kg, C-S Supervariomat with 3 transversely movable arms Adhesive press for solid wood 5 support arms Kedszvmf Nopfx Anuonc 4 levels Adhesive application depth 103 cm, length approx. 240 cm Installation area 180 x 240 cm READY FOR USE

Condition: excellent (used), Year of construction: 2014, 183 USED Complete accessories for Daxner silos. EQUIPMENT: - Flour tank above the bowl - Hopper - Bowl scale - Extractor - Flour catcher - Control - Raw material scale - Water mixer - Pipes - Flour sifter - Flour transport pumps NOTE: Does not include tanks or silos. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Kodpfoxp Rcrsx Anuenc ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Lamina GL 1400 Almost as new Year: 2017 Max size: 1400 x 2150 mm Min width: 70 mm Glue type: 2 guns with hot melt by Nordson Extras: 2 cold tape guns adhesive Knedpfjwna R Esx Anuoc Very good condition Available immediately Located: Europe Eastern

Condition: used, Year of construction: 2014, operating hours: 460 h, functionality: fully functional, For sale: a professional vertical CNC machining center, HYUNDAI WIA F400, manufactured in 2014. The machine is in exceptionally good technical and visual condition, having been used for only approximately 460 operating hours. Machines in this condition are rarely found on the used equipment market. Throughout its operational life, the machine has been regularly maintained. Even when not in use, it was started up every week, the spindle was rotated, and all axes were moved, ensuring that all mechanisms remained in excellent condition. The machine is connected and ready for inspection and testing. Key Information: Manufacturer: HYUNDAI WIA Ksdszxgvmopfx Anuenc Model: F400 Year of Manufacture: 2014.05 Made in: South Korea Technical Specifications: Controller: FANUC Series 32i-Model A Maximum Spindle Speed: 12,000 rpm Automatic Tool Changer: 24 positions Power Supply: 380 V / 50 Hz Installed Power: 20 kVA Weight: 5,100 kg Operating Hours: approximately 460 h Equipment: FANUC Series 32i-Model A CNC control 24-position automatic tool changer 12,000 rpm spindle Chip conveyor Cooling system Fully enclosed work area CE certificate Application: Ideally suited for: Precision milling Machining of steel, stainless steel, and aluminum Single-piece and series production Tool manufacturing Mechanical engineering companies If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 720 mm, Model: SFML-720C Weight: 840 kg Power: 8.5 kW Kjdpfxjyxl Tys Anusnc Voltage: 220 V Date of manufacture: 2011 CE certified

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, fits the CMP, SCC 61/101 electric combi-steamers from the production year 2011 to the latest model series (Index H + I); this hood is no longer suitable for the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. The hood has a few dents, see photos, but this does not affect its function in any way. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance type? Ask us, we have access to a large range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Knedpfx As Aa I E Asnuoc Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul / inspection & expert cleaning Checked & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and carries away vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done later. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17125022437 Year of manufacture: 2017 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Kodozw T Duopfx Anuonc Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Kedpfx Aszzwg Uenuenc Serial Number - 22170

Condition: excellent (used), functionality: fully functional, Natural dye mixing installation Natural dye mixing installation consisting of 2 stainless steel tanks with agitator Internal dimensions: (2x) Ø 590 mm x 850 mm Knsdpfx Anoxb D Tuoujc Tank dimensions: (2x) Ø 600 mm x 1650 mm Distributor with 7 valves GEA Tuchenhagen GmbH Dosing pumps Sera GmbH Flowmeter Endress+Hauser type: PROMAG A APV stainless steel control cabinet

Condition: ready for operation (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Internal dimensions of the installation space: approx. 400 × 400 × 500 mm MACHINE DETAILS Kedpfx Asz Ilt Hsnuenc Operating voltage: 240 V Frequency: 50/60 Hz Rated current: 6–12 A Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 2,000 mm Weight: 500 kg External reference: Alesco - Lot 1

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Ksdpfx Asz Il Rrsnuonc Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16