Complete sawmill (stationary)

Metesa NG-700L

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. Fsdpeymxqasfx Akvepk The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Fpjdpev Sq S Nefx Akvjk Automatic juice discharge

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Motor: 30 kW Fpedjxc H Rlopfx Akvjk Max. feed width: 320 mm Max. feed height: 80 mm With conveyor belt

Condition: new, Year of construction: 2025, Log decks for band saws Length 4 - 10 m Height according to band saw height Fpedpfx Aksvt Dk Ijvsk 2, 3 or more chainlines with heavy duty chains Hydraulic or electric gear driven Hydraulic arm with separator for log landing on band saw table Hydraulic arm length 800 - 1500 mm depending from band saw Hydraulic driven chain on hydraulic arm for log movement

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Fpodpfshpbthex Akvok Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Fpsdpfx Ajyy A Iqskvjk Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: good (used), The machine has been overhauled many new parts new cables new hydraulic station Fjdov Ihdzjpfx Akvjpk The machine has been checked, is functional, We can send a video.

Condition: excellent (used), 3 x 4 trolley retorts from recently closed UK Babyfoods factory. 1300mm models. Complete with trolleys and baskets for cooking / pasteurising pouches. We have the complete contents of this factory available. Fpedpey I Dh Ijfx Akvok

Year of construction: 2009, condition: good (used), functionality: fully functional, Production of 2000 kg/day (6h) Fpjdpfx Aksv Ivcxovek Composed of: URBASA Q908.010b slicer MARRODAN PR32318 B/T elevator to load scalder. With PVC/Polyurethane 3C 500 band with studs. overall length: 3000mm. useful width: 500mm. Power 0,37 Kw MARRODAN PR32217 Linear mesh scalder, for vegetable products. The regulation of the scalding/hydrating system is carried out by means of a temperature controller connected to a PT100 probe. The forward speed is regulated by a frequency variator. Basic construction in AISI 304 STAINLESS STEEL Polypropylene mesh type A-1061mm Total installed power: 4.7kW Group of 2 pulping machines and 250-litre heated tanks for mixing and cooking INOXPA HYGINOX SE centrifugal pump of STAINLESS STEEL, driving the product to exchanger. UNICUS type HRS dynamic heat exchanger with scraper device to increase the heat transmission coefficient AVAILABLE DOCUMENTATION

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Fpedpsl Hxmdsfx Akvjk