Used Column Drilling Machine for sale (67,392)

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm - Height adjustable via rack with hand crank Hnjdevxhdcopfx Aaner - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1: Ø 40 mm Max. drilling capacity for gray cast iron (GG 20) under continuous operation S1: Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1: M 33 Max. threading capacity for gray cast iron (GG 20) under continuous operation S1: M 39 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 180 mm Spindle motor power: 4.12 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 480 mm x 480 mm Hnedpfxogy Haae Aanjr Column diameter: 150 mm Distance spindle center / column: 350 mm Machine weight (net): 470 kg Gross weight: 520 kg Dimensions of transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Electromagnetic clutch Ergonomic 4-way handle cross with integrated feed buttons Scale with adjustable drilling depth Automatic feed reversal when threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, switching electronics in the low-voltage range Color: RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 50 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 60 mm Max. thread cutting capacity for steel (St 60) under continuous operation S1 M 42 Max. thread cutting capacity for grey cast iron (GG 20) under continuous operation S1 M 50 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 200 mm Spindle motor power 4 kW Drive 3-speed gearbox and V-belt Hjdpogy Haljfx Aansnr Speed adjustment stepless via potentiometer Speed range for 50 Hz motor, n = 1,500 rpm 30 – 300; 90 – 900; 190 – 1,900 rpm Feed automatic or manual Number of automatic feeds 4 speeds Range of automatic feeds 0.1 – 0.2 – 0.3 – 0.4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm Column diameter 175 mm Distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimensions of transport packaging (length x width x height) 2.4 m x 0.7 m x 1.3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with high-quality gears and automatic oil pump lubrication and V-belt 3 gearbox speeds can be preselected via 1 front lever 3 speed ranges with stepless speed adjustment via frequency converter digital speed display integrated in the front panel 4 automatic feeds electromagnetic clutch ergonomic 4-way handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth, automatic tool ejector adjustable, rotatable and tiltable work table (Type MGI) machine base plate with machined support surface, T-slots and integrated coolant system automatic feed reversal during thread cutting integrated lighting, EMERGENCY STOP button chip guard with microswitch monitoring thermomagnetic motor protection, switching electrics in the low voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance instructions

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Hjdpfxsx Agiuo Aanenr Technical Specifications • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm • Spindle to base plate distance: 1285 mm • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling capacity in steel ST 60: 65 mm - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm Hodpsyk Dp Njfx Aansnr - Weight approx.: 1,450 kg

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 40 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1 M 33 Max. threading capacity for grey cast iron (GG 20) under continuous operation S1 M 39 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 180 mm Motor power, spindle 4.12 kW Drive V-belt Speed adjustment stepless Speed range for 50 Hz motor, n = 1,500 rpm 100 - 2,000 rpm Feed automatic or manual Number of automatic feeds 3 gears Range of automatic feeds 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm Hnodjgy E U Dopfx Aanjr Column diameter 150 mm Distance spindle center / column 350 mm Machine weight (net) 460 kg Gross weight 510 kg Dimensions of transport packaging (length x width x height) 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base plate with machined support surface, T-slots and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in the low-voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, Bernardo Gear-Driven Bench Drill Press GHD 28 SV with Digital Depth Display Hedpfed Err Ujx Aanenr Technical Specifications Drilling capacity max. 28 mm Thread cutting max. M12 Quick-change drill chuck 1 – 16 mm / B 16 Morse taper MK 3 Spindle speed (8) 75 – 3010 rpm Feed rate 0.004 / 0.006 / 0.009 / 0.012 / 0.10 / 0.15 / 0.30 mm/rev Arm reach 320 mm Distance spindle / table max. 810 mm Distance spindle / base plate 1230 mm Quill stroke 150 mm Column diameter 105 mm Working area base plate 325 x 360 mm Table size / T-slot size 500 x 350 mm / 14 mm Motor output S1 100% 0.90 / 1.2 kW (400 V) Motor input S6 40% 1.35 / 1.7 kW (400 V) Machine dimensions (W x D x H) 600 x 700 x 1900 mm Weight approx. 290 kg Features • Digital quill stroke display for comfortable operation • Standard with automatic quill feed (0.04 – 0.3 mm/rev) • Helical gear for optimal power transmission • High efficiency and smooth operation due to helical gears in combination with steel and reinforced fiber material • Automatic quill feed is deactivated when the set drilling depth is reached • Direction switch for clockwise and counterclockwise rotation for thread cutting • Stable and ground steel column, designed for high loads • 8 switchable speeds through powerful 2-stage drive motor Scope of delivery • Quick-change drill chuck 1 – 16 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeve MK 3 / 2, MK 3 / 1 • Digital depth display • Automatic tool ejector • Right/left hand operation • Height-adjustable protective cover

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, OFFER Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm Hnodpfxjhglvke Aansr - Drill spindle mount: MK 3, long spindle - Drill spindle stroke: 180 mm - Drill spindle speeds, stepless: approx. 140 - 1600 rpm - 3 feed rates: 0.1; 0.2; 0.3 mm/rev - Overhang: 290 mm - Max. distance, table to drill spindle: 620 mm - Rotary table with 2 T-slots: 450 mm - Height adjustable via rack and pinion with hand crank - Coolant system - Drive: 380 V / 0.9 / 1.3 kW - Space requirement: approx. W 750 x H 1900 x D 700 mm - Weight: approx. 280 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1184-135-973, Offer 25248 Hsdpfxew Rvzdo Aanenr Technical data: - Drilling capacity in steel ST 60: 45 mm - Maximum drilling capacity in steel ST 60: 55 mm - Spindle taper: MK 4 - Spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward and reverse operation - 3 automatic feeds with electromagnetic engagement: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Maximum distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Required floor space approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Keyless drill chuck 1 – 13 mm - Emergency stop button - Lighting

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Hnsdpsrivbvofx Aanor Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system Hnjdpfewdvwtjx Aanjr

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm Hsdpfx Ajwd Ii Ueanonr - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Technical data: - Drilling capacity in steel ST 60 20 mm Hsdpfxetz T Dvj Aanenr - Drill spindle holder MK 2 - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) at continuous operation S1: Ø 34 mm Max. drilling capacity for grey cast iron (GG 20) at continuous operation S1: Ø 40 mm Max. thread cutting capacity for steel (St 60) at continuous operation S1: M 27 Max. thread cutting capacity for grey cast iron (GG 20) at continuous operation S1: M 33 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 150 mm Spindle motor power: 3 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Hedpfx Aajgy E S Eensnr Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 420 mm x 400 mm Column diameter: 125 mm Distance spindle center / column: 300 mm Machine weight (net): 360 kg Gross weight: 410 kg Dimensions transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASE MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during thread cutting Automatic tool ejector Adjustable fixed work table (Type MF) Machine base plate with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in low-voltage range Color: RAL 7004 (signal grey), RAL 9011 (graphite black) Control circuitry in low-voltage range Documentation, operating and maintenance instructions

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Hnedpfx Aaoy Uiyvsnjr Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. Hsdpfjyy Rn Sox Aanjnr * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,100 mm, spindle diameter: 100 mm, number of axes: 3, TECHNICAL DETAILS Hodpfszrmncsx Aanenr Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,400 mm Travel range, Z-axis: 1,000 mm Spindle diameter: 100 mm Table length: 2,200 mm Table width: 1,500 mm MACHINE DETAILS Drive system: Conventional Number of axes: 3 Dimensions & Weight Dimensions (L x W x H): 5,300 x 3,400 x 2,850 mm Weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Hsdpfx Aaezuzpasnonr Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display Hsdpfx Ajzuynhsansnr One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Gear-driven drill press, no belt changes required Very quiet and smooth operation - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions, swiveling: 500 x 450 mm - Table dimensions, base plate: 350 x 400 mm - Distance from base plate to spindle nose: 1100 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Column diameter: 120 mm - Drive: 380 V / 1.2 kW Hnjdpfxozuxxfe Aaner - Space requirement: approx. W 600 x H 2100 x D 670 mm - Weight: approx. 350 kg - Includes drill chuck

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Max. drilling depth vertical: 45 mm Hnjdezuxdbspfx Aanjr Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives Hnsdpfx Aezuw Ixeanjr - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Vitap's smart solution for through-hole drilling and grooving with automatic return to the operator. Three controlled axes: - X-axis – continuous workpiece transport via a patented belt system. - Y-axis – drilling head movement, guided by rack and pinion. - Z-axis – drilling, guided by ball screw. The fewer limitations, the greater the progress! Hnsdpfjzutqijx Aanor With our machine, we do not impose any limits on workpiece length. Simple TPA programming: - You can position the holes individually. - The machining operations are displayed on a virtual workpiece. - If the workpiece dimensions change, the holes can be automatically adjusted. Office software license – Power lies in tranquility. - Perhaps you have better ideas in a quieter environment? This allows you to make better use of the flexible CAD system. - With this license, you can write programs where they are developed and discussed, in the office. Color LCD TFT 19" 5/4 screen USB port for loading programs from any office workstation 3 password-protected access levels (operator, supervisor, assistance) Technical data: - 9 vertical spindles, individually controllable - 2+2 horizontal drilling spindles in X - 1+1 horizontal drilling spindles in Y - 1 grooving saw unit (saw blade diameter 100 mm) - Max. workpiece thickness 50 mm - Max. workpiece weight 50 kg - Max. workpiece size: X unlimited, Y 920 mm, Z 50 mm - Min. workpiece size: X 270 mm, Y 150 mm, Z 10 mm - Workpiece transport speed: 25 m/min - Spindle speed 3,600 rpm - Max. horizontal drilling depth, X and Y axes 30 mm - Max. vertical drilling depth 45 mm - Max. vertical tool diameter 35 mm - Max. horizontal tool diameter 12 mm - Motor power 1.7 kW - CE standard

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Hedpfx Aaezgdfbsnonr Spindle mount MK 5 Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm Hodpfx Asuhhzheanjnr bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m