Used Column Drilling Machine for sale (66,895)

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 40 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1 M 33 Max. threading capacity for grey cast iron (GG 20) under continuous operation S1 M 39 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 180 mm Dedsgy E U Djpfx Al Ajwc Motor power, spindle 4.12 kW Drive V-belt Speed adjustment stepless Speed range for 50 Hz motor, n = 1,500 rpm 100 - 2,000 rpm Feed automatic or manual Number of automatic feeds 3 gears Range of automatic feeds 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm Column diameter 150 mm Distance spindle center / column 350 mm Machine weight (net) 460 kg Gross weight 510 kg Dimensions of transport packaging (length x width x height) 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base plate with machined support surface, T-slots and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in the low-voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool holder: MK 3 Spindle speeds, stepless: 150 - 2500 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed can be operated manually or via mechanical feed - Set speed can be quickly and easily read on a digital display - Sturdy cast iron table with T-slots and coolant trough - Adjustable drilling depth stop, drilling depth can be read on a scale - Thread cutting device - CE / IEC, German documentation and German service Scope of supply: Dsdod R Nv Ijpfx Al Aowc - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1: Ø 40 mm Max. drilling capacity for gray cast iron (GG 20) under continuous operation S1: Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1: M 33 Max. threading capacity for gray cast iron (GG 20) under continuous operation S1: M 39 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 180 mm Spindle motor power: 4.12 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Dwsdegy Haajpfx Al Asc Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 480 mm x 480 mm Column diameter: 150 mm Distance spindle center / column: 350 mm Machine weight (net): 470 kg Gross weight: 520 kg Dimensions of transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Electromagnetic clutch Ergonomic 4-way handle cross with integrated feed buttons Scale with adjustable drilling depth Automatic feed reversal when threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, switching electronics in the low-voltage range Color: RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp Dwedpfevu Dv Hjx Al Asc - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: new, Year of construction: 2026, Heavy-duty design for the entire machine High running smoothness thanks to a new spindle design Industrial motor Separate emergency stop switch Drill depth stop LED machine light integrated into the drill head Precisely machined, stable drill table with diagonally arranged T-slots and an all-around coolant channel Dwjdpfx Alog Uaius Asc Drill table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Precision spindle bore Machine control and safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high force absorption and stability Massive, generously sized base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slot size 14 mm Number of T-slots 2 Rotation 360° Tilt 45° Distance spindle - drill table max. 784 mm Speed range Speed range 120 – 1810 min⁻¹ Number of speed ranges 9 Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slot size 16 mm Number of T-slots 2 Spindle Quill stroke 125 mm Spindle mount MK 4 Overhang 270 mm Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, spindle mount: MK 3, total width: 600 mm, total length: 900 mm, total height: 1,900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, spindle stroke: 150 mm, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Dsdpjwy Ec Dofx Al Ajwc Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Overall good condition. Contact us for shipping possibilities! € 2,350.00

Condition: excellent (used), functionality: fully functional, 4-speed gearbox Dwjdpfxsyxcu Ij Al Asc speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment vice available at extra cost

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Dodpfsharwvsx Al Aowc Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: good (used), Stock number: 3046 Djdpfx Alexgh T Nj Ajwc Manufacturer: WMW Saalfeld Machine number: 2118/64 Type / Model: BS 16AII Spindle stroke: 140 mm Spindle mount: MT3 Drilling capacity: 30 mm Speed range: 180 to 2,000 rpm Throat depth: 280 mm Table: 570 x 470 mm Clamping surface: 450 x 350 mm Head height adjustment: 200 mm Footprint: 450 x 780 mm Total connected load: 2.3 kW Accessories / Equipment: separate control cabinet; reversible spindle (right/left rotation); thread cutting device Condition: good Weight: 0.65 t Machine dimensions: 850 x 570 x 2,100 mm Control cabinet dimensions: 600 x 400 x 1,250 mm

Condition: new, Bernardo geared pillar drill GB 50 HS Drilling capacity in steel: 50 mm Drilling capacity in cast iron: 60 mm Maximum threading size: M42 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / number of stages: 40 - 2100 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Overhang: 370 mm Dodpfx Ajd Tm T Hel Aowc Distance spindle / table (max.): 600 mm Distance spindle / base plate: 1190 mm Quill stroke: 250 mm Column diameter: 200 mm Table size / T-slot size: 600 x 500 mm / 14 mm Motor power: 2.2 / 2.8 kW Machine dimensions (W x D x H): 700 x 1050 x 2350 mm Weight (approx.): 670 kg Scope of supply • Gear-type drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2 • Motorized table lift • Coolant system • Electromagnetic spindle feed • Threading device • Automatic tool ejector • LED machine light • Initial filling with Shell Tellus 46 • Digital speed indicator • Digital depth indicator • Height-adjustable protective shield

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Djdpfx Alju T Ty Hj Aowc Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: good (used), Column drill press Manufacturer: ALZMETALL, Type: AB 4 SJ (approx. year of manufacture: 1970) with coolant system, continuously variable speed control, with 2 gear stages. Max. drilling capacity in steel: 40 mm Dwedjlq D Akjpfx Al Ajc Spindle mount: MK 4 Spindle speeds: 80 - 720 rpm Max. spindle stroke: 150 mm Feed rates: 0.09 / 0.16 / 0.28 mm/rev Table diameter: 560 mm Machine is ready for use.

Condition: excellent (used), For sale is an as-new Teknatool Nova Voyager DVR pillar drill equipped with a powerful 2 HP direct-drive motor. The machine is in excellent condition and has been reconditioned and inspected by our qualified staff. (Fully operational) Dwedpfx Asxzf H Ajl Asc Technical specifications: - Pillar drill with DVR drive - Speed range: 50 - 3,000 (5,500) rpm - Forward/reverse operation - Variable speed control - Height: 1,794 mm, Width: 448 mm, Depth: 578 mm - Spindle travel: 152 mm - Table size: 419 x 419 mm - Motor: 2 HP (230 Volt) - Keyed drill chuck 3 - 16 mm The machine is located at A-8561 Söding and can be inspected and collected during our business hours at any time. Subject to prior sale! Related terms: column drill, bench drill, drill press Reference: DT58003 SHIPPING NOT POSSIBLE!!!

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW Dodpfx Alewncaio Aowc - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range Dwodpfxorivbvo Al Aoc 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever Dwedsz I Ub Hepfx Al Ajc - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine Dwjdpfxeza Hzgo Al Ajc - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Dodpfxowk Nxqs Al Aswc Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, machine/vehicle number: 127963, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, spindle mount: MK 3, drilling depth: 130 mm, total width: 420 mm, total length: 800 mm, total height: 1,800 mm, throat depth: 230 mm, overall weight: 190 kg, column diameter: 102 mm, spindle speed (max.): 1,880 rpm, spindle speed (min.): 160 rpm, Dear Sir or Madam, Dwjdpev T Ax Defx Al Aec We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: good (used), FLOTT E-3 pillar drill Dsderic Tbjpfx Al Ajwc throat 260 mm Bore 125 mm stroke Speed: 125 -2500 Clamping table diameter 420x340 mm Column diameter 110 mm Tool holder MK3

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Dwjdjzza Nxspfx Al Aoc Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: new, Year of construction: 2025, Power: 750 W / 400 V Drilling capacity in steel: 25 mm Speed range: 60 - 3050 rpm Djdpfx Aoir Embjl Aowc Spindle taper: MK3 Quill stroke: 95 mm Spindle overhang: 209 mm Table size: 308 mm x 308 mm Quick-change chuck: 1 - 16 mm Weight: 107 kg

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space required: 800 x 400 x 1800 mm Weight: approx. 280 kg Dedpfjv Du Raox Al Aewc

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1438-135-1203, Offer 25251 Technical Data: - Drilling capacity in steel ST 60: 45 mm - Drilling capability in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward/reverse rotation - 3 feeds with electric magnetic clutch: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Space required approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg Dwodpew Id Ndefx Al Ajc - Included: - Machine vice - Quick-action drill chuck 1 - 13 mm - Emergency stop button - Lighting

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm Dwodpovxpp Hofx Al Ajc weight: 220 kg