Used Column Drill for sale (9,707)

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 40 mm max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 45 mm max. tapping capacity for steel (St 60) at continuous output S1 M 33 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 39 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 180 mm motor power spindle 4,12 kW Drive V-belt Speed adjustment stepless speed range for 50 Hz - motor, n = 1.500 rpm 100 - 2.000 rpm Feed automatic or manual Number of automatic feeds 3 gears range of automatic feeds 0,1 - 0,2 - 0,3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm column diameter 150 mm distance spindle center / column 350 mm Machine weight (net) 460 Kg Gross weight 510 Kg Dimension transport v. (length x width x height) 2,3 m x 0,6 m x 1,1 m Kdodpfxogy E U Dj Ah Nsg STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency converter infinitely variable speed adjustment via potentiometer digital speed display 3 automatic feeds mechanical clutch scale with adjustable drilling depth automatic feed reversal during thread cutting automatic tool ejector movable, rotatable and tiltable work table ( type MGI ) machine base plate with machined support surface, T-slots and integrated coolant device integrated lighting EMERGENCY STOP button chip protection device with micro switch

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Kodpfx Ahorivbvs Nedg Digital drilling depth display Height-adjustable protective cover

Condition: new, PILLAR DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 34 mm max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 40 mm max. tapping capacity for steel (St 60) at continuous output S1 M 27 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 33 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 150 mm motor power spindle 3 kW Drive V-belt Speed adjustment stepless speed range for 50 Hz - motor, n = 1.500 rpm 100 - 2.000 rpm Feed automatic or manual Number of automatic feeds 3 gears range of automatic feeds 0,1 - 0,2 - 0,3 mm/rev Table dimensions (width x depth) 420 mm x 400 mm column diameter 125 mm distance spindle center / column 300 mm Machine weight (net) 360 Kg Gross weight 410 Kg Transport dimension (length x width x height) 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency converter infinitely variable speed adjustment via potentiometer digital speed display 3 automatic feeds Kdjdpfogy E S Esx Ah Njg mechanical clutch scale with adjustable drilling depth automatic feed reversal during thread cutting automatic tool ejector movable fixed work table (type MF) machine base plate with machined support surface, T-slots and integrated coolant device integrated lighting EMERGENCY STOP button chip protection device with microswitch monitoring thermoma

Condition: used, Column Drilling Machine CINCINNATI PTC 20 Spindle CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Rotating table Table size: 430 x 430 mm Throat depth: 280 mm Spindle motor: 1,5 kW Drilling/taping function Kdodpfxewt N I Do Ah Nog Voltage: 380 V Width: 600 mm Depth: 1100 mm Total height: 1900 mm Weight: approx 400 KG

Condition: good (used), GILLARDON GB 20 - Column Drilling Machine from UNIVERSITY - Infinitely variable speed control - Adapted to MT 3 - Max. drilling capacity in steel: 30 mm - Throat depth: 285 mm - Quill stroke: 150 mm - Table clamping surface: 400x400 mm - Table height adjustment approx. 650 mm - Drilling depth stop - Speed display - Emergency stop - Work light - Foot switch - Documentation Dimensions: LxWxH 0.7x0.6x1.85 meters / Weight 650 kg Kdjdpfxjw N Hk Tj Ah Neg Errors and omissions excepted

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Kdedpfxjvq N Due Ah Nog

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter Kedpfei Hqhfex Ah Nsdg 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AB/226310, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, empty load weight: 1,310 kg, MACHINE DETAILS Dimensions & Weight Kedpfjx Tpv Iex Ah Nsdg Dimensions (L x W x H): 4,300 x 1,880 x 2,350 mm Unladen weight: 1,310 kg

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Lateral horizontal groups: yes Kdodpfsg E Th Sox Ah Nsg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Table size: 1120 x 280 mm T-slots in table: 3 x 16 mm Table longitudinal travel: 600 mm Table transverse travel: 250 mm Vertical travel: 360 mm Spindle rotation: +/-45° Distance between table surface and spindle face: 230–630 mm Maximum spindle speed (vertical): 108–2400 rpm Maximum spindle speed (horizontal): 90–2000 rpm Spindle taper: ISO 40 Kodeybb T Hopfx Ah Nodg Spindle stroke: 120 mm Power: 2.2/2.2 kW (vertical/horizontal spindle) Dimensions: 1700 x 1450 x 2245 mm (W x D x H) Weight: approx. 1350 kg Accessories, features: - 3-axis SINO digital read our system - spindle feedrate in three steps - 200 mm machine vice - 45° tiltable spindle head - Rotating console - Rotating machine table - 2 x reducers (ISO40/MK3, ISO40/MK2) - Drill head with collet, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 x 15-piece chuck set, diameter 2 – 20 mm - Clamping set - Work light - Cooling water system

Condition: used, Year of construction: 2011, Technical details: Kdjdpjybbzwofx Ah Neg bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 120 mm table dimensions: 510 x 360 column diameter: 115 mm short spindle: MK 3 weight of the machine ca.: 300 kg

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Ksdpfxjya U Uuo Ah Nedg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Ksdpsw Hanhjfx Ah Nodg Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: used, Year of construction: 2016, x-travel 6.500 mm Kodpoxb Ed Usfx Ah Njdg y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: used, Year of construction: 2006, x-travel 3.500 mm y-travel 2.600 mm z-travel 1.000 mm Control HEIDENHAIN iTNC-530 table-size 4.500 x 1.500 mm distance between columns 2.300 mm rapid motion - x-axis 15.000 mm/min rapid traverse Y,Z 12.000 m/min feed 5.000 m/min tool taper ISO 50 number of spindle speeds 5.000 U/min/rpm milling head -swivable UAGA 3.000 U/min 45 Grad spindle drive 22 kW transmission ratio 2 table weight 15.000 Kg Tools changer 30 fach/tools handwheel HEIDENHAIN HR 410 air pressure 6 bar total power requirement 44 kW weight of the machine ca. 25 t - Auto Indexing Head 2, 5º /2.5º Kdedpfjx Hp Drox Ah Neg - Automatic Support in the right side for Head UAGA - Direct Output Head. - Automatic Head Changer - Automatic tools changer

Condition: used, Year of construction: 2000, x-travel 3.700 mm Kjdpfx Aewg Hrgsh Nodg y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: used, Year of construction: 2005, x-travel 5.000 mm y-travel 3.100 mm Kodjxcbiijpfx Ah Nedg z-travel 1.200 mm Control HEIDENHAIN TNC 530 HSCI table surface area 5.000 x 2.000 mm T-slots 11 T - slots - width 22 mm table weight 30.000 Kg rapid traverse X-axis 20.000 mm/min rapid motion - y-axis 30.000 mm/min number of spindle speeds 6.000 U/min/rpm Spindle power 32 kW taper ISO Kegel ISO 50 distance between columns 2.800 mm Internal cooling system 20 bar weight of the machine ca. 65 t dimensions of the machine ca. 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Portable handwheel Laser tool presetter

Condition: used, Year of construction: 1996, x-travel 5000 mm y-travel 2500 mm table-size 2.000 x 2.500 mm table weight 20.000 Kg B-axis (table) (0.001º) mm w-axis 2000 mm z-axis 800 mm rapid taverse 10.000 mm taper ISO ISO 50 turning speeds 0-2.000 U/min spindle drive motor 37 kW Torque 12–183 U/min 0 internal coolant system feed inkl. handwheel HEIDENHAIN HR-410 total power requirement 74 kW Kdedox Ak E Topfx Ah Njg weight of the machine ca. 35 t

Condition: used, Year of construction: 2000, x-travel 22.000 mm y-travel 1.500 mm z-travel 3.000 mm control SIEMENS 840 D milling head -swivable 0,001/0,001 Grad milling head Universalfräskopf 45° Internal cooling system 20 bar Chip coveyor ja Tools changer 30 pos. coolant 1.100 l Tool taper DIN 69871A ISO 50 total power requirement 45 kW weight of the machine ca. 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /INCLUDED Kdsdsxvtf Njpfx Ah Neg Coolant System in Electrical Cabinet INCLUDED Machine Weight 68.000 Kg. Machine Colour RAL 7038 – 5012 Portable Handwheel INCLUDED

Condition: used, Year of construction: 1998, x-travel 4.300 mm y-travel 1.200 mm z-travel 1.500 mm control Heidenhein TNC 426 PB table-size 6.120 X 1.000 mm taper ISO ISO-50 Number of revolutions 20 - 3.000 rpm work speed 5.000 mm/min handwheel HEIDENHAIN HR-410 table weight 20.000 Kg Tools changer 40 fach/tools rapid traverse 12.000 mm/min Kjdpfjxvtgaox Ah Njdg weight of the machine ca. 28 t

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Kdedpfjwzzzfex Ah Nsg Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons Kdjdpsk S Htxofx Ah Nog In good condition

Condition: used, Bench Drilling and Tapping Machine FLOTT Type TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MK2 Throat depth: 195 mm Quill travel: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power supply: 380 volts, 50 Hz - 6 belt steps from motor and 2 belt steps to the drill spindle, 2 motor speeds - Drill head height adjustment via hand crank with rack on the column - 3 guide bushings 0.7mm + 0.8mm and 28G included - 1 keyless drill chuck Ø 1.5 to 13 mm - Original metal pedestal Kodpfxjdzp S Ns Ah Nsdg Space requirement (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg In good condition

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm Kdedpfx Ahjya Hl So Nog - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change) Kdodpfjxt It Asx Ah Njg