Used Cold Rolling Line for sale (21,730)

Condition: used, functionality: fully functional, mileage: 1,026,000 km, power: 426.59 kW (580.00 HP), first registration: 01/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Top Line cab, spoiler, fender and side skirts, rear tyre on 4 points, V8 engine, 580 hp, Opticruise gearbox, refrigerator, air conditioning and stationary climate control, 600 l fuel tank + hydraulic system, retarder, year of registration: 01/2015, km: 1,026,000, inspection expiry: 03/2026 Lrjdpfx Aexfh Tgsdkew

Condition: used, functionality: fully functional, mileage: 75,000 km, power: 97 kW (131.88 HP), first registration: 01/1994, overall weight: 11,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, operation weight: 10,200 kg, maximum load weight: 800 kg, empty load weight: 10,200 kg, tire size: 9 R22,5, next inspection (TÜV): 02/2026, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: parabolic leaf (spring), Year of construction: 1993, machine/vehicle number: WDB6750121K007713, LIFT WORK PLATFORM Dimensions : Lenth 3840 mm; Width 1500mm; Platform floor height from the ground - scissors in folded position: 2500mm, scissors in extended position: 5000mm; Maximum load weigh- 350kg or 3 persons The lift platform can rotate to the left or right Control of rotation and lifting is available from the platform level Normal voltage from which the working platform is protected - 1kV Serial number 92-11-6515, manufacturer: SCHöRLING UDZ serial number N3728004839 DEVICE FOR RIDING ON TRAM TRACKS Wheelbase : 2000mm Track (distance between wheels):1435mm Lrodpfx Ajxylg Tsdkjw The diameter of the rolling wheel: 450mm Raising and lowering the device fo riding on tram tracks is done hydraulically and is electrically controlled using buttons located next to the driver's seat.

Condition: used, Dry board sorting line Ljdpfxoxyixaj Adksrw ⁠Manufacturer: Reinholmen Speed: 90 pcs/min ⁠Pockets: 234 Year of production: 2000 Electric cabinets renovated 2022

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Model: AHS 25/16 Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Lrsdpfxoxwzbzs Adkow Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Weight: 10 570 kgs

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) Ledpjxwytiofx Adkjrw * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Adjustable rollers / Adjustable rollers: 3 Lredpfsxyf Ttex Adkew Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device

Condition: ready for operation (used), model : LA 10 In very good condition. Ljdpou Dmyqofx Adksrw

Condition: excellent (used), Cold circular saw Trennjäger, model VC 260 HA. Saw blade diameter: 315 mm. Cutting capacity: 90 mm. Cutting area for flat material: 160 x 65 mm. 380 Volt, 1.4 kW. Width: 1500 mm, depth: 1000 mm, height: 1400 mm. Supplied with a spare blade. Lrsdjxwt Tpopfx Adkjw

Condition: used, mileage: 50 km, power: 150 kW (203.94 HP), fuel type: diesel, gearing type: automatic, first registration: 01/1900, emission class: none, tire size: -, Year of construction: 1900, fuel: diesel, Equipment: air conditioning, central locking, navigation system, onboard computer, * 21'' alloy wheels * S-line * Black leather electric seats with driver memory * Heated seats * Panoramic sunroof * Flat-bottom leather steering wheel * Adaptive cruise control * Front and rear parking sensors * 3-zone climate control * Reversing camera * Red brake calipers * Wireless phone charger * Traffic sign recognition system * Lane keep assist * Keyless Go * Electric tailgate * Navigation system (GPS) * Apple CarPlay & Android Auto * Drive Select * LED headlights Number of driven wheels: 4 Tyre information: 255/40R21 Delivery time (in days): 1 Parking assistance Air conditioning Type of air conditioning: 3-zone automatic climate control Power steering Central locking GPS navigation Cruise control Sunroof Electric windows On-board computer Heated electric mirrors Speed limiter Headlamp type: LED headlights Bluetooth Automatic start/stop Multi-function steering wheel Light sensor Rain sensor Isofix child seat anchors Electric seat adjustment Heated seats Lane departure warning Keyless central locking Reversing camera Diesel with particulate filter Electric tailgate Panoramic roof Android Auto Apple CarPlay Digital cockpit Distance warning system Leather steering wheel Non-smoker vehicle Lredpfjxyaktjx Adkew Sport package Touchscreen display Traffic sign recognition system Wireless charging for smartphones Power: 204 hp (DIN) Manufacturer Condition: New Power output: 150 kW

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Lrsdpfoxyaivex Adksw

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: B2007016, workpiece weight (max.): 1,400 kg, input frequency: 50 Hz, input current: 25 A, total width: 2,108 mm, total length: 5,165 mm, total height: 1,922 mm, Fully automated, Single Phase, assembly line for 3 Ply Nonwoven Surgical Face Masks Mask Size: 17.5 x 9.5 cm (adults) Output: 80 part/min Date of Manufacture: AUGUST 2020 Date of Installation: MAY 2021 Use start date: NOVEMBER 2021 Dates in use: Intermittently between FEBUARY 2022 - JUNE 2024 Lrodpfx Adswftk Hjkew Supplier: UK Supplier (I2 Europe) Maintained: UK Supplier (I2 Europe) Sonic Welders: Sonotrode Titanium 40kHz (replaced original welders with these higher spec replacements in 2022) Ultrasonic frequency: 40 kHz Voltage: AC 220-240 V (50Hz/60Hz) Working Current: < 25 A Compressed air: 5-7 bar Total Power: 6k: W Output: 50,000 pieces per day (based on 10 hr day) Simple and safe operation Integrated intelligent operating system The manufacturing process includes: Feeding filter materials, folding & pressing, feeding of nose wire, forming of masks, cutting the masks, sonic welding of elastic earloops to masks, Has been set up and housed in ISO 6 certified Cleanroom in the UK which has ensured purity and cleanliness of all equipment. Total period in operation is circa 6 months.

Condition: like new (used), Single-stage centrifugal volute in-line single-head pump: -wear rings made of bronze -cataphoresis treatment -stable sleeve coupling -top-pull-out principle for easy maintenance -optimized hydraulics -in-line design with opposite suction and discharge ports enabling mounting in pipework or on a concrete foundation Ledpfx Adexx T Euekerw -corrosion resistant maintenance-free mechanical shaft seal. Pump speed on which pump data are based 2910 rpm Rated flow 94.5 m³/h Rated head 20.3 m Maximum head 240 dm Actual impeller diameter 137 mm Primary shaft seal BQQE Code for shaft seal BQQE Curve tolerance ISO9906:2012 3B2 Pump version A Materials Pump housing Cast iron EN-GJL-250 ASTM class 35 Impeller Cast iron EN-GJL-200 ASTM class 30 Material code A Installation Range of ambient temperature -30 .. 60 °C Maximum operating pressure 16 bar Max pressure at stated temp 16 bar / 120 °C Pipe connection standard EN 1092-2 Type of connection DIN Size of connection DN 100 Pressure rating for connection PN 16 Port-to-port length 500 mm Flange size for motor FF265 Connect code F Liquid Pumped liquid Water Liquid temperature range -25 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type 132SB Rated power - P2 7.5 kW Mains frequency 50 Hz Rated voltage 3 x 380-420D/660-725Y V Rated current 14,4-13,6/8,30- A Starting current 760 % Cos phi - power factor 0.9 Rated speed 2900 rpm IE efficiency IE2 88,4% IE Efficiency class IE2 Motor efficiency at full load 88.4 % Motor efficiency at 3/4 load 89.6 % Motor efficiency at 1/2 load 88.8 % Number of poles 2 Enclosure class (IEC 34-5) 55 (Protect. water jets/dust) Insulation class (IEC 85) F Built-in motor protection PTC Motor No M3N15222 Controls Frequency converter None Others Minimum efficiency index, MEI ≥ 0.58 Net weight 133 kg Gross weight 160 kg Shipping volume 0.4 m³

Condition: good (used), Fritsch automatic dough sheeter - used - electronic control - automatic flour duster - automatic dough winding Lrsdpfx Adsxx Tzvokjw - serviced - in full working order - collection from warehouse / shipping option available - price on request

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter (max.): 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm .. external diameter max.: 38 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Ljdjxm Ru Njpfx Adkorw Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Operation: handled by 7 operators Condition: well-maintained, fully operational Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Condition: used, Year of construction: 2001, total length: 3,400 mm, total width: 1,060 mm, total height: 1,230 mm, Empty weight: 2.000 kg Price: On request - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 904201006 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 160 - Bottom roll diameter [mm]: 160 - Transport dimensions: 3400mm x 1060mm x 1230mm (l x w x h) Lredpfx Adoxwm R Uokjw - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2002, Metal Circular Saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Type: VMS 300 PV Year of construction: 2002 Condition: used Cutting range: Straight cut: 120 x 75mm 45° miter cut: 80 x 75mm Speed: 40/80 rpm Weight. 200kg Ledpfexwl Ursx Adkorw - semi-automatic version - pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change Scope of delivery - Operating instructions - 1x saw blade (mounted)

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Ljdpfx Adov Ucbnekorw Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional

Condition: ready for operation (used), Maximum saw blade diameter: 550 mm Motor power: 5.5 kW Maximum cutting length: 5 m Discharge table with four ejectors Control via touchscreen panel with inPush software Loading table with chains Length: 7800 mm Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 Ljdpfx Ajxx Scfjdkjrw CE marking

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Lrodevbwfnjpfx Adkow

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: Lredpfx Adewd Nx Dekjw - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: used, mileage: 305,650 km, power: 88 kW (119.65 HP), fuel type: diesel, first registration: 04/2017, Year of construction: 2017, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, parking sensors, power assisted steering, = Further options and equipment = - Passenger airbag - Leaf suspension - Electric windows - Driver airbag - Rear doors - Rear parking sensors - Front parking sensors - Radio/CD player - Sun visor - Adjustable steering wheel = Further information = Unladen weight: 1,368 kg Lodpfx Asxx Nvpsdkorw Damage: none Registration number: NT-171-R

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Behringer Eisele VMS 370 PV Metal Circular Saw Manufacturer: Behringer Eisele Type: VMS 370 PV Year of manufacture: 2008 Condition: used, very good Machining cross section max. round at 90° 130 mm rectangular at 90° 200 x 100 mm round at 45° 130 mm rectangle at 45° 140 x 100 mm Saw blade diameter 370 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 34 / 68 rpm Machine head swivels 45-90-45-30° Total motor power 2.0/2.6 kW Lrodpfx Ajxwl Ryjdkow Width 900 mm Length x width x height 1050 x 900 x 1900 mm Minimum quantity lubrication Scope of delivery: - 1x saw blade - Instruction manual

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Behringer Eisele VMS 350 Metal Circular Saw Manufacturer: Behringer Eisele Model: VMS 350 Metal Circular Saw Year of manufacture: 2023 Condition: used, very good. Maximum processing diameter (round) at 90°: 120 mm Maximum processing section (rectangular) at 90°: 170 x 100 mm Maximum processing diameter (round) at 45°: 120 mm Maximum processing section (rectangular) at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade thickness: 3 mm Lredpsxwl Rtofx Adkjw Bore diameter: 40 mm Adjustable saw blade speed: 17 rpm / 34 rpm Machine head swivels: 45-90-45-30° Total motor power: 1.4/1.9 kW Width: 900 mm Dimensions (L x W x H): 1050 x 900 x 1900 mm Scope of delivery: - Documentation

Condition: good (used), Year of construction: 2013, Metal Circular Saw BEHRINGER Eisele VMS 370 Manufacturer: Behringer Eisele Type: VMS 370 Condition: used, good Year of manufacture: 2013 Lrjdpfxexwl Rmo Adksw Machining cross section max. round at 90° 130 mm Machining cross section max. rectangle at 90° 200 x 100 mm Machining cross-section max. round at 45° 130 mm Machining cross-section max. rectangle at 45° 140 x 100 mm Saw blade diameter 370 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17/ 34 rpm Machine head swivels 45-90-45-30° Total motor power 2.0/2.6 kW Minimum quantity lubrication Scope of delivery: - BEHRINGER Eisele VMS 370 metal circular saw - used saw blade - digital operating instructions - roller conveyor with stop 2m

Condition: new, Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Machining cross section max. round at 90° 120 mm Machining cross section max. rectangle at 90° 170 x 100 mm Ledexwl Rgepfx Adkjrw Machining cross section max. round at 45° 120 mm Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm