Used Cnc Flatbed Lathe for sale (14,011)

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Control system: TX8i with Traub tool monitoring Main spindle: - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions Dwedpfsz Aqkcsx Al Ajc - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures Dodpjv Iplajfx Al Ajwc *

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) Dodpfxeywhhko Al Aewc - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Condition: good (used), functionality: fully functional, Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control – A LOT of accessories – CE compliant!!!! Technical data: >> Machine no. 334511, year of manufacture approx. 1995 Working area: Maximum diameter: Over the cross slide 270 mm Over the carriage 115 mm In the spindle bore 28 mm Largest chuck size 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X / Z axis, stepless 0-5000 mm/min Rapid traverse X / Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Djdpfx Aoz Ezc Sel Aowc Offered is a fully functional Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control. The machine was manufactured around 1995 and comes with a large number of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to verify its condition.

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, CMZ lathe 2 axes (X, Z) TL 15 model Year 2012 Fanuc Series 32i-Model B CNC Chip conveyor ✅ Hydraulic steady rest ✅ Dsdpfx Aoz Alp Tsl Aewc

Condition: used, Year of construction: 2016, DOOSAN LYNX 300M YEAR OF MANUFACTURE: 2016 Machine equipped with a C-axis and powered tools. Model: LYNX 300 M, FANUC 0i TF–s control (10.4” LCD display + Manual Guide) Standard equipment: Spindle speed: 3500 rpm Dsdsz E Rv Iepfx Al Aewc Main motor power: AC 15/11 kW Rapid traverse rate (X / Z axes): 24 / 30 m/min Hydraulic 3-jaw chuck, 255 mm Power of tool drive: 5.5 kW (5000 rpm) Max. turning diameter: 370 mm Max. turning diameter over the carriage: 651 mm Max. turning length: 712 mm Spindle bore (max. bar diameter): 76 mm Tool shank cross-section: 25 x 25 mm (Ø40 mm) Number of tool positions: 12 (tool change time: 0.15 s) Tailstock, CE certificate, transformer 2 axial (vertical) powered tool holders + 2 radial tool holders, basic tool holder set Optional equipment: · Chip conveyor · Tool load monitoring system · Preparation for bar feeder · Part catcher (box version) · Automatic tool measuring system · High-pressure coolant system (7 bar) · Oil separator · Three-color status indicator lamp · Fast Ethernet + 2 GB memory in the control

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 350 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW; 210 mm X-AXIS TRAVEL: 150 mm Dsdpfx Aozda Hwel Aowc Z-AXIS TRAVEL: 450 mm TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, Daewoo Doosan lathe Type: Puma 230A Year: 2000 CNC: FANUC Series 18-T Chip conveyor: Included ✅ Dodpfjz Ih Dhox Al Aewc

Condition: used, Year of construction: 2016, turning diameter 220 mm Dwjdog Sx D Ispfx Al Aec turning length 200 mm control Siemens Sinumerik

Condition: good (used), Year of construction: 2013, spindle bore: 153 mm, spindle speed (max.): 700 rpm, travel distance X-axis: 560 mm, spindle motor power: 37,000 W, total height: 2,900 mm, total length: 6,500 mm, total width: 3,200 mm, overall weight: 15,000 kg, Max. turning Ø:1135mm X-Axis: 560mm Z-Axis: 2000mm Spindle bore: 153mm Speedrange: 700Rpm Spindle power: 37kW ATC / revolver:12 Chip conveyor: Yes Pinole taper: 6Mk Quill Ø: 235mm Length: 6500mm Dedpfotwlm Nox Al Aowc Width: 3200mm Height: 2900mm Weight: 15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), EMCOTurn 120 CNC lathe. Dwedpfxsu Rd S Rj Al Aec 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, Spindle bore: 21 mm, speed range: 150–400 rpm, tool turret with 8 stations. Ex-college machine.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 135xxx, Equipment: documentation/manual, We are offering this very well-maintained Okuma CNC lathe, manufactured in 2008, for sale. Manufacturer: Okuma Year of manufacture: 2008 Machine type: CNC lathe Dwedpfx Asz I Sv Iol Aoc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Djdjz Nym Eepfx Al Aswc

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h Dwjdpfxsw S Efzo Al Ajc interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: excellent (used), Year of construction: 2025, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Pinole taper: 4Mk Stroke pinole: 70mm Quill Ø: 32mm Length: 2500mm Width: 1300mm Dwsdpfxoz Hvlke Al Ajc Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2027, functionality: fully functional, turning diameter: 51 mm, This machine is a new lathe. STANDARD EQUIPMENT Main spindle 15 KW, 4,000 RPM with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-position servo turret VDI30x55 all stations can be used for rotary tools central milling drive 3.3 KW, 3000 RPM including stable multi-tool function (without tool holder) with full C-axis on the left spindle and on the sub-spindle with 48-position spindle locking as support for milling including sub-spindle with workpiece collection tray and finished part conveyor for falling cut-off parts or scrap pieces Dedpfxoug Up No Al Aswc with swiveling finished part conveyor for finished part discharge after back-end machining 4 tool holders for the back end with programmable high-pressure coolant for cleaning clamping devices before the next workpiece is loaded with HD coolant pumps, 70 bar with separate coolant tank (300 liters) with handwheel coolant and hydraulic pumps bar feeder interface interface for Lico chip conveyor 1 set of slide base holders automatic lubrication system cutting force monitoring on all stations control cabinet with air conditioning unit 3-way signal lamp in addition, the machine is equipped with a turret for back-end machining. This turret is designed for solid tools only. BASIC MACHINE EQUIPMENT Interface for Lico/FMB bar feeder Programming support for Lico machines Color Door RAL 7015 Slate Gray Chip tray/frame RAL 7024 Graphite Gray Housing RAL 7035 Light Gray

Condition: used, Year of construction: 2009, machine/vehicle number: 97050022, turning length: 550 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 18,500 W, bar passage: 74 mm, The Saeilo Contur MSL 450 is a used CNC turning machine, manufactured in 2009 (first commissioning in 06/2009), equipped with a Siemens Sinumerik 810D control system. It can turn parts with a diameter of up to 350 mm and a length of up to 550 mm, with a bar capacity of 74 mm. This makes it suitable for chuck and bar work in small and medium-sized series. The machine is located in the Düsseldorf area and was operational during our inspection. TECHNICAL DATA - Year of manufacture: 2009 - Control system: Siemens Sinumerik 810D - Maximum turning diameter: 350 mm - Maximum turning length: 550 mm - Bar capacity: 74 mm - Maximum spindle speed: 3,500 rpm - Spindle drive: 18.5 kW - Tailstock: live center, with hydraulic quill actuation EQUIPMENT AND ACCESSORIES - Chip conveyor, Hwang Kang (hinged belt) - Tool holders, fitted - Turning and clamping tools - Setup tools CONDITION Dodpfx Aloz H Uc Ij Ajwc The machine was operational during our inspection on 01.10.2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Suitable for flanges, bushings, bolts and shafts up to 550 mm in length, for example in mechanical engineering, hydraulics and contract manufacturing. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading and transport are organized by the buyer; upon request, we can provide you with contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, spindle bore: 56 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,450 kg, For sale is a high-precision, cycle-controlled lathe, a WEILER CONDOR VC plus, manufactured in 2013. The machine is in fully functional and extremely well-maintained condition and comes with a very extensive set of accessories (pictures of the machine in use are included). Technical data & equipment: Manufacturer / Model: WEILER CONDOR VC plus Year of manufacture: 2013 Center height: 180 mm Distance between centers: 800 mm Swing over bed: 360 mm Spindle bore: Ø 56 mm Spindle speed: continuously variable up to 4,000 rpm Operating voltage: 400 V Connected load: 12.5 kVA Machine weight: approx. 1,450 kg Digital display / control: WEILER VC plus screen electronics Accessories & scope of delivery (as shown in the pictures): - 1x steady rest (fixed rest) - Extensive Multifix quick-change tool holder set - Large selection of chuck jaws (hard & soft) - Three-jaw chuck mounted - Splash guard / protective cover Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Dwedez Dwtwjpfx Al Aec Trade-in or exchange possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2018, operating hours: 6,600 h, functionality: fully functional, Hyundai Wia E160A 2-axis CNC lathe Year: 2018 Fanuc I series control Max. turning diameter: 280 mm Max. turning length: 300 mm Dwedpfx Aljzz N Ikj Ajc Spindle bore: 45 mm Chuck: 170 mm 12-tool turret Tool probe Tailstock Documentation Chip conveyor

Condition: excellent (used), Year of construction: 2019, HAAS ST-30 – 2019 – BMT65 / driven tools / C-axis / only 1385 cutting hours For sale: HAAS ST-30 CNC turning center, manufactured in 2019. The machine is in very good technical and visual condition, with very low operating hours – only 1385 hours of actual cutting time. A rich configuration including a BMT65 tool turret, driven tools, and a C-axis allows for not only turning operations but also milling, drilling, and threading without the need to transfer the workpiece to another machine. TECHNICAL DATA * Manufacturer: HAAS Automation * Model: ST-30 * Year of manufacture: 2019 * Date of manufacture: 07/2019 * Control: HAAS CNC * Chuck: 254 mm / 10” * Spindle nose: A2-6 * Maximum spindle speed: 3400 rpm * Spindle power: 22.4 kW / 30 HP * Maximum torque: 407 Nm at 500 rpm * Maximum bar diameter: 76 mm * Spindle bore diameter: 88.9 mm * Tool turret: BMT65 * Driven tools * C-axis * Hydraulic tailstock * Machine without Y-axis WORKING RANGE * X-axis travel: 324 mm * Z-axis travel: 660 mm * Maximum workpiece diameter above frontrest: 806 mm * Maximum machining diameter with BMT65 turret: 457 mm * Maximum machining length: 660 mm * Maximum bar diameter: 76 mm * Distance between centers: approx. 762 mm EQUIPMENT * BMT65 turret * Driven tools * C-axis * Tool probe * Hydraulic tailstock * High-pressure coolant system * Through-tool coolant * Belt chip conveyor * Mist collector/filtration system * Rigid tapping * Spindle orientation M19 * VPS – Visual Programming System * Wireless network * 1 GB memory * Compensation tables Dwjdpez D E Aysfx Al Aoc MACHINE HOURS Data read directly from the control: * Power-on time: 13,052 h * Cycle time: 1,764 h * Actual cutting time: only 1,385 h Please send a specific price offer.

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 250MY SmoothG Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm Dedpozk I Tqsfx Al Ajwc The machine is equipped with: - CNC control: Mazatrol SmoothG - KITAGAWA 3-jaw chuck, BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. powered tool holders The machine has only 900 hours of pure machining time!!!

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm Dsdpfeyw H Szox Al Aswc - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. Dodovvtpxepfx Al Aowc rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 2019, operating hours: 14,129 h, CMZ TA 20 YS-640 Swing over bed / carriage: 760 / 600 mm Maximum turning diameter: 460 mm Distance from main to sub spindle: 649 mm Axis travels X / Y / Z / B: 310 / +70 / −50 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing outer / inner: 150 / 100 mm Spindle bore: 73 mm Bar capacity: 66 mm Chuck diameter: 210 mm Dodpfsymc Sbjx Al Aswc Tool turret: 12 stations, all live Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Sub spindle: Maximum speed: 4,500 rpm Power: 14 / 8 kW at 292 / 153 Nm Bearing outer / inner: 150 / 100 mm Spindle bore: 61 mm Bar capacity: 52 mm Chuck diameter: 175 mm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions (approx. L x W x H): 2.5 x 1.8 x 2.1 m Weight: approx. 6.3 t Operating hours: approx. 14,129 h Scope of delivery: Bar feeder BREUNING IRCO SiMag 80.1-R-3000 II, year of manufacture 2015 Coolant unit

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition. Swinging diameter over the bed: 500 mm Distance between centers: 780 mm X-axis travel: 200 mm Y-axis travel: 80 mm Control system: Siemens 840 Dedez Hldcopfx Al Aewc Total operating hours: 26,501 h Max. turning length: 500 mm Maximum turning diameter: 200 mm Turning diameter over the bed (max): 500 mm Distance between centers: 780 mm Maximum spindle speed: 6000 rpm Workpiece weight: 45 kg Weight: 4500 kg Filtration system Includes a CNC Spacesaver SS 2500 bar feeder (2018) Inspection in operation is possible by prior arrangement.