Used Cnc Double Column for sale (22,521)

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Rodpfx Aex Sw Hfohzsbt Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m Redpfx Ahsx Sr Evszobt weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes Rodpfx Ahevwgm Hjzobt closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° Rsdpfx Asvwglvohzobt b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Condition: Used Stock number: 0375 Pressing force: 1200 t Rjdpfjx R U Idsx Ahzjbt Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories Redpfx Ahjx R Eftozebt +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1986, Make: MÜLLER, Model: ZE400-20.24.1, Year of manufacture: 1986, Machine No.: 498601, Max. pressure: 400 t, Clamping area (table): 2,000 x 1,300 mm, Clamping area (ram): 2,000 x 1,300 mm, Installation height min./max.: 600-1,400 mm, Ram stroke: 800 mm, Ram adjustment: 200 mm, Table draw cushion pressure: 5-160 t, Table draw cushion stroke: 350 mm, Ram draw cushion pressure: 5-40 t, Ram cushion stroke: 125 mm, 2x two-hand operation, safety guard system, press control, 2 accessory cabinets with contents. +++ Attention: This machine is part of an online auction! +++ Redpfxsx R D R Us Ahzebt

Condition: used, Year of construction: 2000, Make: DROOP + REIN, Model: T2540R50E, Year of manufacture: 2000, Serial No.: 01540, Control: Fidia, Type C20/M30, Travels X/Y/Z: 5,000 x 3,000 x 1,950 mm, 5 axes, Tool holder: SK 50, Table size: 5,000 x 3,500 mm, Spindle speed: 6,000 rpm, 60-position tool changer, Measuring system: Braankamp, Safety light barriers, 1 workbench, 3 drawer cabinets, 3 WTS trolleys, 6 WTS roller cabinets, Contents: 250 SK 50 tool holders, measuring probe, clamping devices, setup tools Rsdpfxox R Dr Eo Ahzjbt +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 Rbedpfx Aox Rzkxehzet +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann +++ Note: Machine is part of an online auction! +++ Rsdpfxsx Ry Tfj Ahzebt

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year of manufacture: 2001, Serial No.: 7.5592, Pressing force: 1,000 t, Changeable table: 2,500 x 2,100 mm, Ram surface: 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Drawing cushion table pressure: 30-200 t, Drawing cushion stroke: 300 mm, Press control with OP Siemens Simatic OP 37, Control and switch cabinets Rjdpfx Ahjx Ry Ntszjbt

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Redoxcgtgspfx Ahzebt Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 650 mm, table length: 6,300 mm, table width: 2,500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 3,500 m/min, rapid traverse Z-axis: 10,000 m/min, distance between stands: 3,050 mm, table load: 30,000 kg, overall weight: 59,000 kg, spindle nose: NT No.50, feed length W-axis: 1,300 mm, Okuma MCR-A5C gantry machining center (2013) with BT50 spindle, 6,500 mm X-travel and 30 t table load. Machine has approx. 5,700 cutting hours and 6,900 spindle hours, suitable for heavy and precise machining of large workpieces. Rbjdpjx Tzyxefx Ahzst

Condition: excellent (used), Table length: 8000mm Table width: 2500mm Between columns: 3100mm Weight of workpiece: 65t Rodpfx Asx Tpmyohzjbt Weight: 127t

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Rsdpfx Ahswzx Ntjzobt Table area 6000 x 2000 mm Face slide, etc.

Year of construction: 1978, condition: used, pressure 25 t distance between columns 580 mm stroke 150 mm dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm Rbjdelp U Arspfx Ahzjt weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m

Year of construction: 1990, condition: used, pressure 250 t distance between columns 1100 mm Rbjdpfx Aelp U I Eshzet stroke 400 mm dayligth 600 mm table surface area 1000x800 mm ram surface 1000x800 mm table height 950 mm total power requirement 65 kW weight of the machine ca. 25 t dimensions of the machine ca. BxTxH 0000x0000x3900mm m

Condition: used, pressure 100 t Rodjlp U Sdopfx Ahzjbt distance between columns 310 mm no. of strokes 80 Hub/min ram - range of adjustment 40 mm table surface area 400x300 mm ram surface 250x190 mm table height 960 mm tool hole in ram Ø 35 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2200 m

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm Rbjdpfxsq Rhkwe Ahzet weight of the machine ca. 2,5 t

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm Rbsdpfx Aslp Uz Uohzjt

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m Rbsdpfxjlp Uz Rs Ahzet

Condition: used, Year of construction: 1991, pressure 30 t distance between columns 1200 mm stroke 500 mm table surface area 1200x1000 mm Rsdpfx Aewt Durshzebt ram surface 600x400 mm table height 850 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2400x2200x3400 mm

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm stroke 300 mm Rsdelp U A Sjpfx Ahzjbt table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm Rbedpelp U Eusfx Ahzst table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: used, Year of construction: 2000, pressure 130 t no. of strokes 50-250 Hub/min sheet width 250mm mm stroke 8-120 mm ram - range of adjustment 100 mm table surface area 1600x800 mm ram surface 1600x800 mm Rbsdpfx Asxh Sypohzet hole in the table 1100x250 mm table height 1000 mm 370 mm weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm