Used Closure Mould for sale (3,582)

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Kdedpfx Ajxmbwbofiju Application Types Injection Moulding

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Kdjdpfjxn S Tpjx Afieu

Condition: ready for operation (used), Well-maintained panel saw in top condition Combination unit: table milling machine & circular saw Type: KFS 20 Year of manufacture: 2000 Sliding table length: 200 cm Cutting width to the right of saw blade: 100 cm Saw blade tiltable up to 45 degrees Milling spindle 30 mm Rip fence extendable up to 250 cm Technically inspected Immediately available Shipping possible Ksdpfsxn Sbysx Afiedu

Condition: used, Year of construction: 2012, clamping force: 320 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 14,500 kg, load hours: 69,990 h, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Kedpjxl Hi Tefx Afiedu

Condition: excellent (used), Four-sided planer scm sintex nte Planing width max 180 mm Planing height max 105 mm 4 spindles Bottom + top 7.5 kw Right + left 7.5 kw Electric height and width adjustments Worktop lubrication pump Headset Spindle speed 6000 rpm Spindle bore diameter 35 mm Kjdpfsvzr Drjx Afiedu Weight 900 kg European CE certificate Technical documentation Very good condition

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! Kdedpfx Ajxlzg Hefisu VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 2000 Control Unit Brand FANUC Injection Unit Screw diameter 22 mm Clamping Unit Clamping force 300 kn Opening stroke 230 mm Kodpfx Asxl H D Djfisdu Distance between bars 310 × 290 mm Size of mold platens 440 x 420 mm This FANUC Roboshot alpha-i30B was manufactured in 2023. It features a clamping force of 300 KN, a screw diameter of 22 mm, and a maximum injection speed of 600 mm/s. Ideal for precision in electrical injection moulding, it offers a compact platen size of 440x420 mm and efficient energy consumption. If you are looking to get high-quality moulding capabilities, consider the FANUC Roboshot alpha-i30B machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Planer 9 heads Working width - 20 cm Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW Kdjdpfx Afotrdwtjiju PERFECT CONDITION!

Condition: good (used), Code: 0152 Brand: HOLZMANN Model: VS 25/4 PM - CE Standard Automatic 4-spindle moulding machine for joinery workshops, for wooden profiles, frames, furniture, plastics, composite materials and various - CE Standard - Year 2005 Technical data: Sturdy structure Sound-proof cabin Working width min/max mm 18/230 Working height min/max mm 7/120 Feed speed mt/min 6/12 Infeed table length mm 2200 Spindle diameter mm 40 Spindle speed rpm 6000 1° Spindle Surface planer - Diameter mm 120 - Motor Kw 5 5 2° Spindle Vertical right spindle moulder - Diameter mm 120 (180) 3° Spindle Vertical left spindle moulder- Diameter mm 120 (180) - Motor Kw 7,5 4° Spindle Thickness - Diameter mm 120 (180) - Motor Kw 5,5 Frontal adjustment of spindle movement Table lubrication pump Kdsdpfx Ajwvk E Aofiou N° 4 Suction inlets diameter mm 120 Overall dimensions mm 3400 x 1250 x 1550 h Weight kg 1480

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,068 cm³, injection pressure: 2,120 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 65 mm, terms of delivery: FCA Pegnitz Kdsdpfx Aoxluk Sofiju delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2000, total height: 1,830 mm, total width: 1,050 mm, total length: 2,600 mm, - Table length [mm]: 2530 - Table width [mm]: 360 - Feeding device present: Yes - Brand: Maggi - Type: OM 414 - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes Kjdoxltcyjpfx Afisdu - Brand: Aigner - Year: 2000 - Documentation available: No - CE marking present: Yes - Serial number: AB/132662 - Transport dimensions: 2600mm x 1050mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Robust craftsman’s machine with a spindle moulder tiltable 45° on both sides and MK4 interchangeable spindle. Stable steel and cast iron construction. Dynamically balanced milling unit anchored to the worktable. Exceptionally robust build. Smooth operation due to precision components and high intrinsic weight. Standard features include reversible rotation (left/right) with electronic interlock when changing direction. Five speeds from 3,000 to 10,000 rpm. Speed change is operated easily and conveniently from the machine's side. Comes as standard with MK 4 interchangeable spindle system. Large grey cast iron worktable for sustained precision. Easy handling via controls and speed display on the machine's front. Large-dimensioned milling fence with fine adjustment and aluminium fence jaws included as standard. Fence adjustment via hand crank with numerical digital display of spindle height in 0.1 mm increments. Powerful industrial motors. Delivery includes: Technical Data: Dimensions and Weight: Weight (net): approx. 510 kg _____ Dust Extraction Connection: Extraction port diameter fence: 1 x 120 mm Extraction port diameter machine: 2 x 80 mm _____ Worktable: Worktable length: 2,500 mm Worktable width: 810 mm Table height: 923 mm Kdjdpfx Aoxnqx Rjfisu _____ Setup Information: Space requirement details: dimensions take into account maximum travels or working lengths. Working area length: 3,700 mm Working area width/depth: 5,000 mm Note: Please add these working area dimensions to the space requirement to determine the recommended free installation area for the machine. _____ Equipment: Milling fence: heavy-duty professional design with aluminium fence jaws and fine adjustment, adjustable from the front via hand crank with numerical digital display. Arc milling safety guard: YES Spindle height adjustment: manual Spindle tilting adjustment: manual Control: manual height and angle adjustment of the milling unit Position of controls: on the machine body Table features: table extension left and right and pull-out workpiece support (total width 2,500 mm) _____ Electrical Data: Supply voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW _____ Milling Spindle: Spindle tilt: -45 to +45 ° Usable spindle length: 140 / 180 mm Clarification of usable spindle length: for spindle Ø 30-35 / for spindle Ø 40-50 mm Milling spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm _____ Max. milling tool diameters: Max. sinkable tool diameter: 320 x 60 mm Max. profile milling diameter: 250 mm Max. tenoning diameter: 350 mm Max. contour milling diameter: 160 mm

Year of construction: 2013, condition: ready for operation (used), Injection Unit Screw diameter 30 mm Stroke volume 85 cm³ Ksdjxl H Amepfx Afiodu Injection pressure 2000 bar Additional Equipment Machine handling is included. This Arburg Allrounder 270 H 350-70 was manufactured in 2013. It features a screw diameter of 30 mm, a maximum injection pressure of 2000 bar, and a nozzle lift-off stroke of 210 mm. With 20,000 operating hours, this hydraulic injection moulding machine includes machine handling. Consider the opportunity to buy this Arburg Allrounder 270 H 350-70 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900 Kdsdpfeu Tqm Rox Afisu

Condition: used, Year of construction: 2010, clamping force: 500 kN, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, overall weight: 24,500 kg, load hours: 15,000 h, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) Kdodpfexluk Eex Afiju delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2010, operating hours: 65,320 h, condition: ready for operation (used), Control Unit Model MC5 3.6 This Krauss Maffei 800-6100 MX was manufactured in 2010. A hydraulic injection moulding machine with a clamping force of 800 tons and a screw diameter of 105 mm. It has a working capacity of 6,100 cm3, operating for 77,977 hours. Consider the opportunity to buy this Krauss Maffei 800-6100 MX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Ksdpfew Ih Tysx Afiedu

Condition: good (used), Code: 0129 Brand: SAC SUERI Model: TS 110 - CE Standard Spindle moulder with fixed shaft for joinery, furniture, furnishings, window frames, doors, plastics, composite materials and various - CE Standard Technical data: Sturdy structure with cast iron base Worktable dimensions mm 1100 x 900 Worktable height mm 875 Shaft diameter mm 35 Shaft vertical stroke mm 180 Kedpfoxcn U Eox Afisdu Shaft rotation speed rpm 3000/4500/6000/10000 Reversing direction of rotation Motor Hp 5,5 Suction ports diameter mm 140 Overall dimensions mm 1100 x 840 x 1190 h Net weight kg 800

Condition: used, Year of construction: 2017, clamping force: 480 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,500 kg, load hours: 12,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Ksdpfxexlukxs Afiedu terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 1998, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Kdedpfx Aexl H D Rsfisu

Condition: ready for operation (used), Year of construction: 2005, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 420/810-2300 was manufactured in 2005. It is a hydraulic injection moulding machine featuring a clamping force of 4200Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 420/810-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Kjdpfoxl H Dwjx Afijdu Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Clamping Unit Clamping force 1100 Kn This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Application Types Kodpfx Ajxl H Dqefiodu Injection Moulding

Year of construction: 2000, operating hours: 111,000 h, condition: ready for operation (used), General Data Machine weight 16000 kg This Krauss Maffei 350-1900 C1 was manufactured in 2000. A robust hydraulic injection moulding machine with a clamping force of 300 tons and a screw diameter of 70 mm. It has a working capacity of 1,900 cm3 and weighs 16,000 kg. Consider the opportunity to buy this Krauss Maffei 350-1900 C1 hydraulic injection moulding machine. Contact us for more information. Kdodow Ih Udjpfx Afiju Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Kdodpfx Asxl H E Usfieu Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Injection pressure 2494 / 1970 / 1878 bar Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 4050 mm Measurements depth 9200 mm Injection Unit Screw diameter 70 mm Stroke volume 1077 ccm Injection pressure 2200 bar Clamping Unit Clamping force 5000 kN Distance between bars 920 mm Additional Equipment Plus Peripherals: 8x Temperature Control Unit Thermo 5 / Robot: KUKA KR30-3 This Arburg Allrounder 920 S 5000-2100 was manufactured in 2017. It's a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 920 S 5000-2100 hydraulic injection moulding machine. Contact us for more information. Application Types Kdedpsxlvazjfx Afiju Injection Moulding

Condition: ready for operation (used), Year of construction: 2002, operating hours: 70,000 h, Control Unit Brand KRAUSS MAFFEI Main Drive Number of axis 3 Injection Unit Ksdpfx Aexlu Uqofiodu Screw diameter 90 mm Injection pressure 1742 bar Clamping Unit Clamping force 800 kN Additional Equipment Hydraulic pulley: 4 Case service: 5x hydraulic, 8x pneumatic Robot type: Remak RD30CNC Crane runway: 50000 kN Distance from crane to boom with chain: > 2150 mm This 3-axis Krauss Maffei 800-5000MC4 was manufactured in 2002. It features a clamping force of 800 kN, a screw diameter of 90 mm, and a maximum shot volume of 2863 cc. The machine includes a Remak RD30CNC robot and supports a crane runway capacity of 50,000 kN. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 800-5000MC4 machine we have for sale. Contact us for more information. Application Types Injection Moulding