Used Clamp Tool for sale (40,049)

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 32392, table mounting size: 560 x 240 mm x-axis: 300 mm y-axis: 275 mm z-axis: 200 mm spindle retainer: ISO 40 spindle rotations: 40 - 2000 rpm Nksdpfxsd Tfcis Ahvow operating voltage: 380 V total energy requirement: 1,5 kW space needed: 1200 x 1100 x 1700 mm weight: ca. 750 kg

Condition: good (used), Total length: 3100mm Width: 42mm Height: 145mm Nkedpfx Ahjhz T H Rjvsw Weight (folded in at the front): 114 kg

Condition: excellent (used), machine/vehicle number: 28652, table mounting size: 250 x 800 mm x-axis: 400 mm y-axis: 175 mm z-axis: 450 mm spindle retainer: ISO 30 spindle rotations: 50-2000/50-3400 rpm operating voltage: 380 V Nodpfx Aheh D Rzujvskw total energy requirement: ca. 2,5 kVA kW space needed: 1200 x 1000 x 1600 mm weight: ca. 1100 kg

Condition: ready for operation (used), Edge length: 90 x 90 mm Total length: 2700 mm Weight: 114 kg Nsdpfx Ajh N A Uwjhvjkw

Condition: ready for operation (used), Total length undivided: 3000 mm Njdshwwf Repfx Ahvekw

Condition: ready for operation (used), Edge length: 80 x 80 mm Total length: 2500 mm Weight: 104 kg Nedpfx Aoh N A Uzjhvskw

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Nedpfx Ahed D U T Hjvokw Working radius approx.: 1650 mm

Condition: excellent (used), in full length (without division): 3050 mm Height: 161mm Nksdpfx Ahshz T Huovow Width: 50mm

Condition: excellent (used), Edge length: 140 x 140 mm Total length: 4000 mm Weight: Nodpfx Aeh N A Uljhvokw

Condition: good (used), Edge length: 80 x 80 mm Nksdpfx Aeh N A Upehvow Total length: 2500 mm Weight: 71 kg

Year of construction: 1990, condition: ready for operation (used), machine/vehicle number: 350119, table mounting size: 350 x 700 mm x-axis: 500 mm y-axis: 320 mm z-axis: 400 mm Nsdpegq Dcljfx Ahvekw spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Condition: good (used), for sale: several used clamping brackets / boring mill brackets 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5,8t Load capacity 60t 6 pieces available Nedjg Sbbxspfx Ahvokw partly with stairs

Condition: used, Year of construction: 2003, pressure max. 8,24 BAR Receiver 2,8 L Temperature range max. 50°C - min. 0°C °C In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Nkodew S Nk Uopfx Ahvjw Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Tool and cutter grinder CG Njdpfxoywavts Ahvjkw

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min Nkjdpfjywadwex Ahvew

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Knetspirale kneading tool Spiral for Kemper Spiral Nodpfx Ascdh Hfshvjkw Model: SP 75 stainless steel More Knetspiralen upon request!

Condition: like new (used), Year of construction: 2023, turning diameter 620 mm turning length 1500 mm Nkodjlar N Nspfx Ahvjw control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete)

Condition: not inspected (used), ● Condition: Unchecked ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald ● Availability: By arrangement – Pickup date is fixed for 06.05.2026. Unfortunately, collection outside this period cannot be accommodated. ● Net price: €1,499 ● Payment terms: Advance payment - by bank transfer ● Internal number: DÄ24 Scope of delivery: ● Includes a substantial inventory of various milling cutters, drills, side milling cutters, slab milling cutters, collets, and indexable inserts Dimensions & weights: Nkjdpfxjyv Hqne Ahvsw ● Footprint (L x W x H approx.): 800 x 750 x 1200 mm ● Weight approx.: 300 kg If you have any questions or would like to arrange a viewing, please feel free to contact us! Additional notes: ► Transport to the destination can be offered upon request ► The quoted price is net plus VAT ► The goods are sold excluding any warranty ► Technical data subject to change ► Subject to prior sale ❗The goods are sold exclusively to business customers❗

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 1,500 rpm, turning diameter over cross slide: 1,000 mm, total length: 2,510 mm, total height: 3,546 mm, total width: 4,155 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning height: 825 mm, mount diameter: 1,000 mm, workpiece diameter (max.): 1,100 mm, overall weight: 16,000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Axes: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X axis travel: 500+40 mm - Z axis travel: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 - Maximum workpiece weight (including chuck): 1250 kg Turret: - Number of positions: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X / Z: 20 / 20 m/min - X axis ballscrew: diameter 50 x 8 mm - Z axis ballscrew: diameter 50 x 8 mm Motors: - Spindle motor: 37-45 kW - Motorized tool motor: 7 kW - X and Z axis servomotors: 4-7 kW Nedpfx Ahoyxg N Aevokw General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16,000 kg INCLUDED ACCESSORIES: - Fanuc 0i-TF Plus numerical control (15''), Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, Ethernet, and USB ports - Belt-driven spindle, 1500 rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Supplied without chuck - Servo-assisted BMT turret, 12 positions, prepared for motorized tools - Chip conveyor - High-pressure pump 15 BAR - 3-color alarm and cycle-end lamp - Integrated work light - Leveling feet - Tool box with service keys - Air blow system through the spindle - Upgraded turret motorized tool motor – from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) - Dual pressure release - Renishaw M.T.P. manual presetting - Oil skimmer - Static toolholder kit - Fume extractor predisposition - Black color NEW MACHINE IN STOCK FOR IMMEDIATE DELIVERY

Condition: ready for operation (used), Table size: 130 x 265 mm Nodpfx Asyv D Drehvokw Table height: 180 mm

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm Nsdeyv Aptopfx Ahvokw -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos -Dimensions: 1400/820/H380 mm -Weight: 732 kg

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 400 mm y-travel 390 mm z-travel 350 mm Control DIALOG4/CONTOUR 3 tool taper SK 40 Nodpfjyv Abvox Ahvjkw spindle turning speed range 31 - 3150 U/min feed range 10 - 2000 mm/min weight of the machine ca. 1,7 t dimensions of the machine ca. 1.600 x 2.500 x 2.000 mm Additional information CNC control DIALOG4/CONTOUR 3 Table: 700 x 480 mm rigid angle table Swivel-type vertical milling head Coolant tank

Condition: excellent (used), Year of construction: 2000, operating hours: 32,767 h, functionality: fully functional, machine/vehicle number: 04-07, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, The machine was overhauled in 2025! TECHNICAL DETAILS Travel distance X-axis: 400 mm Nkedsyxf D Sspfx Ahvow Travel distance Y-axis: 250 mm Travel distance Z-axis: 250 mm Spindle speed: 200 - 12,000 rpm Grinding spindle motor power: 10,000 W Workpiece diameter (max.): 235 mm Workpiece length between centers: 570 mm Feed length X-axis: 400 mm Feed length Y-axis: 250 mm Feed length Z-axis: 250 mm Feed speed X-axis: 24,000 mm/min Feed speed Y-axis: 24,000 mm/min Feed speed Z-axis: 24,000 mm/min Grinding length: 570 mm Grinding diameter: 235 mm Center height: 1,100 mm Swivel range: 225° MACHINE DETAILS Control: Siemens 840 D Power: 10.3 kW (14.00 HP) Type of input power: Three-phase current Dimensions & Weight Dimensions (L x W x H): 2,405 x 2,460 x 2,320 mm Space required (L x W x H): 4,265 x 3,800 x 2,320 mm Total weight: 2,800 kg Input current: 30 A Input frequency: 50 Hz Input voltage: 400 V Operating hours: 32,767 h FEATURES Infinitely variable spindle speed Schütte Integrated Grinding Software (SIGS)

Condition: new, Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Chuck FK 38 new - unused suitable for Reishauer gear grinding machine, fitting the spindle for machines RZ 150 / RZ 160 / RZ 260 clamping diameter: 38 mm Nksdpfswzkcxsx Ahvjw for max. speed = 3,000 rpm balanced with clamping stroke monitoring / 3-point contact monitoring and provision for additional functions clamping / air supply monitoring / clamping stroke monitoring incl. assembly and operating instructions as well as Reishauer wooden transport container Price / details on request All technical specifications subject to typing errors / mistakes. We sell exclusively to countries within the European Community.

Condition: ready for operation (used), Year of construction: 1990, Immediately available from university: Maho universal tool milling machine, model MH 400 P, year 1990. Equipped with Heidenhain TNC 135. Table size 690 x 270 mm. Travel distances with feed 360/200/375 mm. Travel distances with handwheel 400/250/375 mm. SK 40 taper. Hydraulic tool clamping. Spindle speed 40 – 2,500 rpm, stepless. Feed rate X and Z axis 5 – 1,000 mm/min, stepless. Y axis feed 5 – 670 mm/min, stepless. Rapid traverse 1.2 m/min. Drive 2.2 kW. Conventional handwheels for X/Y/Z axes. Coolant system. Tool holders. Machine vice. Weight 1,000 kg. Price EUR 3,000.-- plus VAT, ex works. Nedpfxoyxc Nle Ahvjkw