Used Circular Saw Machine for sale (66,213)

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm Hnjdpfxoxvbvvs Aitju - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Hsdpfxozzfr Eo Aitjnu Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm - Square: 82 x 82 mm - Miter cut: at 45° - Round: 110 mm - Rectangular: 80 x 120 mm - Square: 82 x 82 mm Hnjdpszqtrfofx Aitsu - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm - Weight: approx. 300 kg

Condition: as good as new (ex-display), Year of construction: 2025, Sled length: 3200 mm Cutting width at the fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scoring saw: yes Saw blade height adjustment: electric Saw blade swivel adjustment: electric Hedpfx Aiohpl Unotenu Fence adjustment: electric Saw blade angle display: digital Cutting height display: digital Fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Dust extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Condition: used, Technical specifications to follow Hedpfx Ajml H Neitenu

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Hnjdpfxsxu Dg Us Aitou Scoring unit: yes Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut ruler display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Hsdpsxua N Sefx Aitonu Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Hnjdpfezryu Aex Aitju - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF

Condition: new, Year of construction: 2025, Slider length: 3200 mm Cutting width at the rip fence: 1350 mm Hedpfsiv Hdvox Aitjnu Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Rotational speeds: 3000 / 4000 / 5000 RPM Motor power: 7 kW Motor brake: yes / automatic Dust extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Condition: new, Year of construction: 2022, Cutting length: 2500 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 2550 mm Cutting depth: 125 mm Scoring saw: yes Saw blade height adjustment: electric Saw blade swivel adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Dust extraction port: 80 mm and 120 mm Hnodpsid Igqofx Aitsu Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6560308, Refurbished Kirschner LK 700 soldering unit. Hnsdpfezltitsx Aitou Machine for fully automatic soldering of carbide/PCD teeth onto circular saw bodies. All relevant attachments are NEW and can be documented with an invoice. The machine can currently be inspected while powered on.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1811001, type of input current: three-phase, overall weight: 110 kg, input voltage: 400 V, Equipment: emergency stop, Abrasive cut-off saw manufactured by Vertex Machinery Works Co., Ltd. The unit was produced in 2018 in Taiwan. The machine is mounted on a dedicated, blue workshop base. Technical data: Manufacturer: Vertex Machinery Works Co., Ltd. Country of manufacture: Taiwan Year of manufacture: 2018 Serial number (S/N): 1811001 Motor power supply: 400 V / 50 Hz Number of phases: 3 PH (Three-phase) Machine weight: 110 kg Hnjdpfxez Sutxs Aitsu Compliance mark: CE Design and equipment: The machine has a manual clamping lever and a vise for securing the workpiece. The cutting part is equipped with an abrasive disc (a close-up photo shows a Tyrolit disc). The steel base is equipped with a lower shelf made of perforated sheet metal.

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals Hnsdpfszuymkox Aitju - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: U/min Hsdpfxed Aai Te Aitonu - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm - Multiple strokes - Swiveling arm with control panel and CNC control MEP - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW Hodsxc Uq Hopfx Aitsnu MACHINE DETAILS Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slot Center Machine No. M64127 Year of manufacture: 09/2019 The commutator slot center has four processing steps. The following components are processed in these steps: Hnjdpfxeg H Inzs Aitsu Contact slot saw Insulation slot saw Deburring tool Brush The Stäubli TS 80 robot with SP1 control has two grippers that transfer the commutator to the individual stations. Software information: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More images are available via this link. Further technical data will follow shortly. Complete factory closure, large selection of storage platforms, pallet racking, shelving, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1998, Semi-automatic circular saw machine Manufacturer: KASTO, Type: V350 U, Year of manufacture: 1998 with miter cut, roller conveyor, and stop Saw blade diameter: 350 mm Pneumatic clamping device and saw feed Hnsdpfefym Ewjx Aitju Infinitely adjustable. Machine is in good condition and has seen little use.

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet. Hedetqt T Iepfx Aitsnu

Condition: repair required (used), HAMECH TKS 400 CIRCULAR SAW – FOR PARTS For sale: a Polish-made HAMECH TKS 400 circular saw. The machine is sold FOR PARTS / FOR REPAIR – it is incomplete. MISSING THE SAW LIFTING / ADJUSTMENT MECHANISM. Sold in the condition shown in the photos. DATA FROM THE NAMEPLATE: • Manufacturer: HAMECH • Forest Machinery Industry Plant Hjdpfxsz Hrgqe Aitjnu • Type: TKS 400 • Year of manufacture: 1990 • Serial number: 536 • Voltage: 380 V • Motor power: 5.5 kW • Frequency: 50 Hz The saw has a solid, heavy-duty construction and a large work table. The machine can be used as a basis for repair or as a source of spare parts. PLEASE NOTE: • Missing saw lifting mechanism • Machine is incomplete • Not sold as ready for operation • Technical condition has not been thoroughly checked • Visible signs of years of use • Paint loss and surface corrosion • Sold in the condition shown in the photos For the TKS 400 model, configurations with a main blade up to 400 mm, a 5.5 kW motor, and adjustment of the blade position up/down and at an angle are common. The parameters of individual TKS 400 versions may vary. The machine is sold as INCOMPLETE – FOR PARTS / FOR REPAIR. Possible to inspect before purchase. Collection in person.

Condition: used, Year of construction: 2023, gebraucht 2023 6246 prompt, Zwischenverkauf v Hnjdsy Dh Ikopfx Aitju Italien 2970 € 1 300 mm 300 x (2)2,5 x 32 mm 33/66 U/Min 45 ° 45 ° rund 102 mm, Quadratprofi rund 90 mm, Quadratprofil rund 80 mm, Quadratprofil 500 mm 1050 mm 990 mm 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,000 mm, total width: 1,150 mm, total height: 1,550 mm, cutting range round steel at 90°: 125 mm, overall weight: 620 kg, saw blade speed: 2,800 rpm, length stop: 2,000 mm, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Hjdpfxetqfvye Aitenu

Condition: excellent (used), Full automatic Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Misc. accessories Hodpfxoy H Dmns Aitsnu MARCELS MASCHINEN AG

Condition: used, Year of construction: 2020, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw Hjdpfxsygx Aij Aitenu - Hydropneumatic semi-automatic - pneum. Workpiece clamping device

Condition: used, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Hodpfxorub S Ue Aitsnu Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Cutting lenght: 6200mm Hsdpfx Aexrg R Rjitonu Blade 500mm