Used Circular Saw Blade Sharpener Machine for sale (92,136)

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm Ksdpfeu Nif Tsx Afijnc dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: excellent (used), PERTICI UNIVER 50 SEMI-AUTOMATIC MITRE SAW This machine is primarily designed for cutting aluminium and PVC profiles. Both mechanical and electrical safety features of the guards have been given special attention. During upward cutting, the operator is protected by the top cover as well as by the machined profile. The cutting angle can be manually set from 0 to 67.5 degrees, both left and right, by rotating the turntable. Seven fixed stops (67.5 - 60 - 45 - 0 - 45 - 60 - 67.5) enable cutting without adjustment. Other positions are set using a graduated rule. Motor: 5.5 HP Three-phase supply Knjdpfxsxp Rx Te Afijc Blade diameter: 500 mm Cutting capacity at 90°: diameter 178 mm or 160 x 160 mm 1 carbide blade, diameter 500 mm 2 vertical pneumatic clamps 2 horizontal pneumatic clamps Blade lubrication.

Condition: excellent (used), CATALOG NUMBER 7541 Technical data: - max. diameter of the main blade (without the scoring blade) 400mm - max. diameter of the main blade (with the scoring blade) 350mm - diameter of the blade hole 30mm - max. cutting height for a 400mm blade - 90 degrees -120mm, 45 degrees - 85mm - max. cutting height for a 350mm blade - 90 degrees - 95mm, 45 degrees - 67mm - main blade adjustable up/down and at an angle - blade guard - with a side carriage - cutting length on the carriage 1700mm - cutting width on the carriage 1400mm - cutting width at the guide 1350mm - main engine 6kW - table top dimensions 1190x990mm - with extension 1880mm - with extension 1890mm - with scoring saw - max. diameter of scoring saw blade 120mm - diameter of scoring saw spindle 20mm - scoring saw motor 0.75kW - 3 types of rotation speeds 3500,4500,6000rpm - brake - diameter of exhaust port 80,120mm - dimensions length/width/height 3050x2200x1600mm - weight 800kg ADVANTAGES - Polish production Knodpfxovwczyo Afiec - DTR documentation - blade guard - with scoring saw - with extension and widening - used saw, very good condition Net price: PLN 15900 Net price: EUR 3740 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2006, Veneta Papper band-separating saw with feed Wheel diameter 800mm Maximum cutting width 166mm Maximum cutting height on feed 170mm Maximum cutting saw width 40mm Material pulling belt 2 top pulling rollers Knedsk Ny Emjpfx Afijc Automatic access to the set dimension Quick selection of 4 saved programs Motor power 5.5kw CE certificate

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: Knsdpfouyyhaex Afiec 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm Kodpfx Afstxlxueijnc - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm Knsdpfx Aju Nilyefioc cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Year of construction: 2019, condition: ready for operation (used), Main Drive Number of axis 2 This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine. Application Types Welding Knodpfx Afoxpkpfoijc

Condition: excellent (used), CATALOG NO. 5992 TECHNICAL DATA Milling machine - Spindle diameter: 30mm - Spindle height: 120mm - Interchangeable, lockable spindle - Height adjustable (up/down) - Original cast iron fence with full adjustment - 4 spindle speeds + forward/reverse - Table dimensions: 1140x910mm - Motor: 4kW Circular saw - Max blade diameter: 270mm - Spindle shaft: 30mm - Height adjustable blade (up/down) - Blade guard - Cutting width at fence: 370mm - Cast iron table - Motor: 1.85kW - Dimensions (L/W/H): 1070x1450x1040mm - Weight: 662kg Net price: 6900 PLN Net price: 1620 EUR depending on exchange rate of 4.25 EUR Ksdew Emvcepfx Afienc (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm Kjdpsvmtdksfx Afisnc capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1983, cutting height (max.): 120 mm, saw blade diameter: 350 mm, working width: 250 mm, Hardly used multi-blade saw from a training workshop 22 kW motor Chain width 250 mm Knjdpfxoxqg Tie Afisc 250 mm clearance on the right Max. cutting height 120 mm With wide additional roller conveyor for return, approx. 4 m long

Condition: ready for operation (used), MULTIBLADE PRIMULTINI MRA cutting height 160 mm motors 110+110 kW conveyor 550 Knodexqgvwspfx Afijc

Condition: good (used), Code: 0230 Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Technical data: Knedsxn Stcjpfx Afiec Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9

Condition: used, Year of construction: 2025, Horizontal Metal Band Saw with Swiveling Arm Kjdpfsxqfauex Afienc This horizontal metal band saw with a swiveling arm allows cutting in a plane perpendicular to the axis of the material and at any angle between 0° and 60°. The drive from the electric motor to the wheel driving the saw blade is transmitted through a mechanical gearbox (not a belt drive). The saw blade is tensioned on two cast iron wheels using a manual tensioner and guided through a set of bearing-mounted rollers. The material to be cut can be fed manually or with any mechanical feeding device, while the tool feed operates by gravity, based on oil flow in a dual-chamber hydraulic cylinder. The appropriate arm lowering speed is achieved using a valve that regulates the oil flow between the chambers. The blade guides are equipped with a set of bearing-mounted rollers, which significantly improve blade tracking, service life, straightness, cutting accuracy, and quality. The arm, featuring a rigid design, is made of profiled cast iron. A control panel is mounted on the arm. The base is built as a rigid welded steel sheet body. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped to form a tray for coolant drainage and chip collection during the cutting process. A cast iron worktable is mounted to the base, along with a swiveling arm and a control panel mounted on a separate arm. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed motion is the downward movement of the arm. The arm lowering speed (cutting speed) is regulated by the hydraulic cylinder. In the lower position of the arm (after the material is cut), the saw blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any cover is opened. An additional safety feature automatically switches off the saw in the event of blade breakage. Technical Specifications Blade size: 2110 x 0.9 x 20 mm Motor: S1 100%: 0.75 kW Power supply: 230V 50 Hz Blade speed: 65 m/min (50 Hz) Weight: 173 kg Packaging dimensions: 1150 x 560 x 930 mm WARNING !!! The machine is a return item. Original packaging is missing, and paint color differs from standard.

Condition: excellent (used), CATALOGUE NUMBER 7136 TECHNICAL DATA - max blade diameter 400mm - blade hole diameter 30mm - blade guard - max cutting height 100mm - main blade adjustable up/down - cutting width at the guide 400mm Kedpepmtfmofx Afienc - guide adjustable at an angle - main engine 3kW - table top dimensions 800x1000mm - brake - dimensions length/width/height 930x1130x1000mm - weight 425kg ADVANTAGES - German production - brake - guide adjustable at an angle - used saw, very good condition Net price: PLN 5200 Net price: EUR 1220 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55 kW (74.78 HP), • 160 mm cutting height Kjdpfxexqd Nne Afisnc • 600 mm cutting width • 70 mm saw shaft • 1 set of spacer rings according to customer requirements • 5–30 m/min infinitely variable feed • 2.2 kW feed motor • 4 driven lower rollers • 2 upper driven rollers • 3200 kg weight • 55 kW saw motor • Complete electrical system, with control cabinet and control panel • CE-compliant design • Machine painted in RAL 6011 • Protective devices painted in RAL 7032

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics and Siemens S7 control. Completion upon order. Cross-cut saw with chalk mark detection. Wood cross sections: 430x30 / 300x150 / 200x200 mm DIMTER OptiCut 602 R Saw blade diameter: 650/700 mm Feed speed: 120 m/min Saw motor: 15 kW SEW servo drive 11.00 kW with frequency inverter Knjdsv Diy Aspfx Afijc Cross-cutting accuracy: +/- 2 mm

Condition: good (used), branded types - circular saw, make Gema, type HGB Accessories: Vice Knjdpfxou T N T Ae Afioc

Condition: good (used), Year of construction: 2018, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm Knodpfsxn Anwex Afioc capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75.0 mm rechts

Condition: used, Year of construction: 2025, PROMOTIONAL PRICE! A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines. Product features This universal machine enables cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all vibrations. Control panel is situated close by the worm gear. Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. NEW Arm construction allows for changing the machine from horizontal into vertical with workbench in just a moment. This is not only useful for metal cutting but also as a jigsaw machine for carpentry. Technical data Cutting band size 2360×20×0.9 mm Band tension mechanical (manual) Band speeds 34, 41, 59, 98 m/min Feed speed 0-50 m/min (stepless feed) Arm lowering control stepless - hydraulic cylinder Vice base height 600 mm Power supply 230V Main motor power (kW) S1 100%: 0,75; S6 40%: 1.1 kW Weight 190 kg Dimensions 1250×700×1000 mm Warranty 12/24 months User manual yes Ksdpfxoxqd T Tj Afionc CE Declaration yes Angle 0° 180 mm 180×210 mm 180×180 mm 45° 130 mm 140×90 mm 130×130 mm WARNING!!! THE MACHINE IS RETURNED, SERVICED, NO ORIGINAL PACKAGING.

Condition: new, Year of construction: 2025, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Weight approx. 92,5 kg Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Supply voltage 400 V Mains frequency 50 Hz Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Kjdpfjhkz Hisx Afienc Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, BEHRINGER HBE 321 A from year 2015, with accessories. Available from stock. The machine will be reconditioned by us including a major inspection. Saw band 4440x34x1.1 mm, cutting range 320 mm round – flat 350 x 320 mm, flood cooling and minimal lubrication, hydraulic clamping units, roller conveyors and coolant collection tray. Knsdexni A Ujpfx Afijc

Year of construction: 2014, condition: good (used), The machine is from year of manufacture 2014/6 (demonstration machine) Commissioning was in 2017 Knodpfxsh Awzmj Afioc Cutting range round - 75 mm Rectangle - 60 mm Saw blade dimension ø 285 x 2,0(T) x 1,7 (t) mm T = waste; t = thickness ; bore 32; 4x11 at 63 mm Blade speed inverter monitored 30- 150 rpm blade motor 7,5 kW Hydraulic system 1,5 kW Coolant system Oil mist lubrication Blade feed system servo motor & ball screw material support 1.200 x 5.200 mm Bar feed system: servo motor and ball screw Automatic index single stroke 6 - 600 mm Multiple stroke up to 3.000 mm Automatic chip conveyor Chain conveyor Machine weight, incl. table 2.800 kg Length tolerance +/- 0,1 mm Cutting accuracy +/- 0,1 mm Remaining piece standard 75 mm Loading capacity 13 x ø 75 mm bars Max loading width. 1.000 mm Accessories: chip conveyor, air cleaning, loading magazine (still under power in production)

Condition: good (used), Year of construction: 1988, Ulmia table saw Type 1710 S make no. 7270 Year of manufacture 1988 With sliding table With slotted hole drilling table / equipment Swivel saw blade Table extension Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Kedpfjr Elm Njx Afijnc Weight: 203 kg Location: ex stock 54634 Bitburg - available immediately - Request more information

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Knedor Elmwepfx Afioc Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -