Frame saw sharpening machine

ISELI GAP 100

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic Sharpening Machine for Frame Saws – GAP 100 (Machine available from January 2026) The automatic profile grinding machine GAP 100 has been specially developed for the precise sharpening of frame saws. Its compact and highly robust design guarantees a long service life and maximum reliability in daily operation. Equipped with advanced technology and an easy-to-use control system, the GAP 100 offers high functionality – both for standard applications and for demanding grinding tasks. An excellent price-performance ratio, minimal maintenance requirements, and intuitive operation make this machine the ideal choice for sawmills that value quality, efficiency, and cost-effectiveness. Gkodpfx Agev Tl Arj Dof The GAP 100 consistently delivers precise grinding results, reduces your operating costs, and sustainably increases your productivity.

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Gkjdpfjtuui Dox Ag Djf Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Condition: reconditioned (used), gang saw setting device for setting and resetting on both sides in one pass for gang saw blades up to approx. 3 mm thick, with feed device, with 2 new dial gauges, with quick height adjustment, with clamping rail and clamping carriage for gang saw blades Gkodpfx Asru Dabsg Dsf

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 3124, Trimming saw Esterer DKV-5S year of construction 1981 Gedpfx Ageuy Ib Io Djkf 55 KW saw motor with ASV/B pull-out system year of construction 1981

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Gedpfx Asd Spf Rjg Dekf Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: excellent (used), Year of construction: 1999, 1. Milling Head Debarker Baljer Zembrod - Year of manufacture 1999 Gksdpfswtpmgex Ag Dsf - Heavy-duty cross conveyor for round timber, 4-strand - Debarking carriage - Milling head - Planing head for clean finishing - Root reducer - Operator cabin - Rails - Discharge boxes

Condition: new, Working width: 381 mm Working height: 150 mm Main engine 7,5 HP 3P Feed motor 1/4 hp Feed speed 6.2 m/min grinding belt dimension 405 x 1372 mm Machine size 1000 x 730 x 1680 mm Packing size 750 x 830 x 1900 mm N.W./G.W. 450/500 kg Gjdpfx Agek Rit Ne Dokf You can call or write us. We can speak and write German and Russian. You can also send messages in English. 34.4.4.

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Gkodsdf Ufpjpfx Ag Djf Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,330 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Technical condition: Very good Front tires Type: Pneumatic Front tires Size: AS 340/80 R18 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: AS 18-22.5 163A8 Rear tires Condition: 80 - 100% Description: The M 50-4 rough terrain forklift is designed for work on difficult terrain or with obstacles. With 4 drive wheels and a ground clearance of 43 cm, this forklift offers good maneuverability under all circumstances. A wide range of tires is available to adapt to different terrains. This serves to optimize your productivity. Accessible from both sides, the pivoting cab offers a spacious operator's area with ergonomic controls. The high driving position offers a 360° panoramic view for greater safety for the driver and his surroundings. Sideshift, 3rd valve, full cab, CE certificate, -service booklet -CE declaration -operator's manual -spare parts manual Gedpsn Hcw Dsfx Ag Dekf

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Processing length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing Gkedpfx Aed A Ttxog Djf - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.