Used Chamfer for sale (348)

Condition: ready for operation (used), Dowel Cutting and Chamfering Machine Manufacturer: Löser Type AA 200 Table-top machine for the production of wooden dowels, for the efficient cutting and chamfering of dowel rods/round bars. The Type AA 200 Dowel Cutting and Chamfering Machine is a low- to medium-performance machine. It can cut and chamfer round bars made of wood, plastic, laminated paper, and other materials. The dowel length is adjustable between 20 and 150 mm and is determined using a setting scale. The chamfer thickness can be adjusted as required. The machine is equipped with a magazine ring as standard. This allows the operator to operate several machines simultaneously or perform other tasks. The machine features a solid, torsion-free cast iron stand. Extremely easy operation, simple maintenance, and easily accessible lubrication points are further advantages of this machine. Technical specifications: For dowel diameters approx. 6-13 mm Minimum cutting length: 15 mm Largest cutting length: 150 mm Lrodpfx Aewmpvhjd Njg Output: approx. 2,000 pieces per hour Weight: 53 kg (tabletop machine) Including adapters for dowel diameters 8-9 mm, 10-11 mm, and 12-13 mm. The pinion and chain have been replaced.

Condition: used, Bar pointing/chamfering machine PAREX Lredpsxdnwpofx Ad Nsg

Condition: new, MFR is a stand-alone machine intended to produce pallets on a smaller scale. How does it work? The operator manually feeds the machine with boards and the boards are then automatically chamfered. The chamfered boards are thereafter collected in a magazine. Machine specification: Standard performance Operators: 1 Length: Chamfering unit 3,7 m, total 5,9 m with the chamfered board magazine (2,2 m) included Width: 1,2 m Height: 1,7 m Power: 5 kW, 3x400 V+N Ljdpfx Adewduvnj Nsrg Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Cyclone hose diameter: 100 mm Cyclone fan capacity: 1000 m³/h Machine capacity: 12 boards/min (max length 1600 mm) Standard equipment: 1 separate electric motor 3 kw 2800 r/m 2 cutters 4000 r/m

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1000x900x1400 mm Weight 680 kg Ljdpfx Adevz E Uqe Njrg Total power requirement 12 kw

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Lsdjt Hwylspfx Ad Nerg Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Year of construction: 1991, condition: used, max. wheel diameter 0 mm max. number of teeth 0 max. module min. module total power requirement kW weight of the machine ca. t Lodpfx Ast Hwv Hsd Nsrg dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Year of construction: 1975, condition: used, max. wheel diameter 280 mm max. number of teeth 100 max. module 6 min. module 1 total power requirement 6 kW weight of the machine ca. 2500 kg Lredpfxet Hw Dkj Ad Neg dimensions of the machine ca. m

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Lodpfx Adsqpdkcj Njrg

Year of construction: 2024, condition: new, functionality: fully functional, ø 110-450 mm, wall thickness max. 72 mm Ledpfx Adst A Ufdj Nsrg Servo steel infeed and synchronization. NEW, unused

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors Lrsdpfjx Tqgbox Ad Nog - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, Year of construction: 2021, Suitable for fully automatic grinding or re-toothing and beveling of HSS and segment circular saw blades as well as solid carbide circular saw blades, cutting saw blades/thin-cutting saws with chip breaker (diameter of 200-500 mm, tooth pitch of 8-30 mm), using deep grinding techniques with CBN or diamond grinding wheels. Accessories: Total enclosure, Prepared for later installation of a device for grinding chip grooves, Automatic central lubrication, Automatic threading of the grinding wheel, including checking the diameter and tooth pitch, Device for fully automatic chamfering of regularly toothed saw blades (from Automatic sawblade holder movement to the entered saw blade diameter Programmes for all standard curved and pointed teeth, Circular grinding of sawblades to grind down the existing teeth Automatic switching of the peripheral speed between CBN and diamond grinding wheels Extinguishing generator Absolent extraction system Machine light 1 saw blade holder F1730, Coolant system with 300 l tank, Operating tools, Electricak cabinet chiller, Oil collection tray. saw diameter: ( 40 ) 130 – 850 mm Tooth pitch: 1 - 50 mm number of teeth: 2 - 998 saw blade thickness: max. 8 mm Grinding wheel diameter: 200 x 32 mm coolant pressure: approx. 6 bar Connected load: approx. 8,9 kW (400 V / 50 Hz) Weight: about 1260 kg Dimensions: L x W x H = 1250 x 1870 x 2250 mm colour: grey RAL 7045 / RAL 7047. Ledpfsycu Itex Ad Nsrg

Condition: used, Year of construction: 2011, Suitable for fully automatic grinding, re-toothing, and beveling of HSS and segmented circular saw blades, as well as solid carbide circular saw blades, chamfering saw blades/thin-cutting saws with chip breakers (diameters from 200-500 mm, tooth pitch from 8-30 mm), using a deep grinding process with CBN or diamond grinding wheels. Accessories: Total enclosure Automatic central lubrication Integrated coolant system with coolant tank and pump Device for fully automatic chamfering of regularly toothed saw blades Programmes for all standard curved and pointed teeth CAD programme for designing your own tooth shapes and changing the speed sequences Automatic threading of the grinding wheel, including checking the saw blade diameter and tooth pitch Service software with error diagnosis display on the screen Automatic switching of the peripheral speed between CBN and diamond grinding wheels Grinding wheel thickness compensation, i.e. different tooth pitches can be ground with one grinding wheel Conversion kit for oil (pressure relief flap, electromechanical door lock, pressure monitor, etc.), Aerosol fire extinguishing system Lsdpfx Adeycu Ere Nsrg Oil drip tray Machine light Control cabinet cooling unit. Saw diameter: (40) 130 - 850 mm Tooth pitch: 1 - 55 mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200 x 32 mm Coolant pressure: approx. 6 bar Coolant tank: approx. 300 l Grinding motor: 3 kW Connected load: approx. 7.3 kW (400 V / 50 Hz) Weight: approx. 1600 kg Dimensions: L x W x H = 1250 x 1870 x 2250 mm colour: grey RAL 7045, RAL 7047.

Condition: used, Year of construction: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing cutter unit, including DIA tooling. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station with radius R 2.5 mm. Technical specifications: - Hot-melt glue application to the workpiece for edge material up to 3 mm. - 60 mm workpiece thickness without jointing aggregate, 40 mm with jointing aggregate. - Maintenance-free, coated glue pot. - HF end trimming station (16,000 rpm) for front and rear edge overhang. - HF milling station (16,000 rpm) with replaceable insert cutter (combination type) and fine adjustment accessible from the operator side. - Spaces available for additional processing units (Hebrock system). - Feed rate approx. 10 m/min. - Adjustable cutting depth for trimming saw. - Signal lamp for workpiece sequence. - Robust chain drive. - Ergonomically arranged control panel. - Double roller top pressure beam. - Viewing windows for aggregates from both rear and operator sides. - PLC control including touchscreen. Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic including cooling and anti-static spray unit, 2014, 1 unit hot air aggregate for creating the optical zero-joint using special edge materials intended for this purpose. Including: - Pneumatic glue pot positioning - Cooling and anti-static spray unit - Two additional quick-change edge channels - Special version for corner rounding unit, max. workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Retrofitting possible later (additional costs on request) Lrsdoycuknjpfx Ad Nog Technical data (Airtronic & corner rounding unit): - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Operational in approx. 2 minutes - Special version, minimum workpiece thickness 8 mm Further accessories and upgrades available on request: - Airtronic retrofitting on PLC machines, only possible at the Hüllhorst–Oberbauerschaft factory - Upgrade to edge thickness 8 mm, up to max. workpiece thickness 40 mm, with pneumatic saw adjustment - Special infeed fence for overlaid panels, 16 mm and 19 mm thickness, max. glue overhang 8 mm, separate pneumatic milling cutter adjustment (straight/radius) controllable from operator panel - Buffing station (swabbel), 1 unit - Corner rounding unit, 1 unit, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Ball bearing for corner rounding cutter 24.1 mm: 1 unit - Ball bearing for corner rounding cutter 24.2 mm: 1 unit - Corner rounding unit for 60 mm workpiece thickness: 1 unit - Quick-change device for the corner rounding unit: 1 unit - Exchange motor 0.37 kW for the corner rounding unit: 1 unit, including terminal box with electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or optionally Siko counter, including R 1.0 mm radius cutter, 24.1 mm bearing for corner rounding unit: 1 unit, 24.2 mm: 1 unit - Radius scraper: 1 unit with pneumatic lift-off device, radius R 2.0 mm and R 1.0 mm - Flat scraper: 1 unit with pneumatic insertion control - Glue station changeover system including glue outlet device downward (preparati

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec Lrsdpfx Aotv Rlbsd Neg opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: excellent (used), Year of construction: 2011, pressure 100 t chamfer lenght 2250 mm distance between columns 2050 mm Stroke beam 275 mm Lrjdpsvzcm Defx Ad Nsg max. opening beam/table 410 mm C-recess 300 mm max travel X-axes 550 mm Z1+Z2 axes controlled by cnc manuell, 4 Anschlagfinger mm max. distance R-axes 130 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 13000 h length 3500 mm width 2000 mm height 2600 mm weight 5700 kg total power requirement 9 kW dimensions of the machine ca. 4x2x2,7 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time. All machines can be inspected at any time under power and demonstrations of the machines are possible at any time. Light barrier protection front motorized adjustable (Fissler) Rear Sick light barrier protection Manual crowning Promecam tool holders

Condition: used, Year of construction: 2005, operating hours: 34,000 h, pressure 170 t chamfer lenght 3050 mm distance between columns 2700 mm Stroke beam 300 mm 520 mm 350 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec Lredpsru Rz Sefx Ad Nog 600/1000 mm 200 mm Z1+Z2 axes controlled by cnc 0-2500 mm Number of working hours 34000 h Dimensions of machine: length 3600 mm width 1950 mm height 3300 mm weight 12000 kg Control Cadmann total power requirement 24 kW dimensions of the machine ca. 4x2x3,3 m

Condition: used, Year of construction: 2007, pressure 170 t chamfer lenght 3000 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 520 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm R1 and R2 axis controlled by cnc 250 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 36820 h Lrsdpsxyzy Nefx Ad Nog length 3600 mm width 2200 mm height 2850 mm weight 12000 kg total power requirement 16,5 kW dimensions of the machine ca. 4x2,5x3 m Control Amada AMNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW Lrodexyzzaspfx Ad Njg dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2008, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec Lrsdotv Rk Rspfx Ad Nsg bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 14600 h Dimensions of machine: length 3300 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3,5x1,8x2,6 m Control AMNC NT All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Year of construction: 2005, operating hours: 54,000 h, condition: used, pressure 50 t chamfer lenght 1250 mm distance between columns 1020 mm Stroke beam 215 mm 470 mm 300 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc manuell,4 Anschlagfinger mm Number of working hours 54000 h Dimensions of machine: length 1600 mm width 1500 mm height 2300 mm weight 4900 kg Control Task Lodpfsppdpcox Ad Norg total power requirement 9 kW dimensions of the machine ca. 2x2x2,5 m

Condition: used, Year of construction: 2008, pressure 160 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 175 mm dayligth 240 mm throat 350 mm working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 920 mm Control ERD 110 M Lredpfxjyclvhj Ad Neg oil volume 150 l total power requirement 15.0 kW weight 9300 kg range L-W-H 4250 x 2170 x 2800 mm Features: - NC electro-hydraulic press brakes - with DURMA NC control "ERD 110M" * Illuminated LCD display * X-axis control & value display * Y-axis control & value display - Swiveling operator panel, front left - NC controlled axes: Y1/Y2 + X - NC electro-motorized backgauge (X-axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z+R axes) - NC electro-motorized depth adjustment (Y-axis) - Manual bending table crowning * Adjustment via hand crank * with analog value display - AMADA/PROMECAM upper tool holder * with upper wedge crowning & quick-change adapter * Split deer foot upper tool (AMADA) - AMADA/PROMECAM lower tool holder * Split 4V universal die, in die shoe - 2x front Laying arms - Side guard (swinging doors) - Rear guard (swinging door) - LAZER SAFE safety device (not functional) - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1995, This LEONHARD KURZ Fürth KTF 70737L was manufactured in 1995. It features a Mikromat stretch control, a fixed stop side on the left, and an insertion table for angular insertion of long cross pieces. It includes two grinding units for straight edges and a KURZ embossing unit with unwinding and winding capabilities. Consider the opportunity to buy this LEONHARD KURZ Fürth KTF 70737L edgebander. Contact us for more information. • Control: Mikromat stretch control • Stop side: Fixed on the left • Grinding: 2 x straight-edge grinding units, overall oscillating • Chamfering: VZK chamfer grinding units for upper and lower chamfer • Note: Free space available Additional equipment • KURZ embossing unit with unwinding and winding unit, incl. 3 hot embossing rollers • Insertion table for angular insertion of long cross pieces • Manually adjustable feed guide with plastic roller strip Ledpfx Aeycg Uljd Nsrg

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Lodpfevvkd Tjx Ad Nerg Storage location: Nattheim

Condition: used, Shaping and chamfering machine Weinig Guilliet KXY for four-sided planing of woods in very good original condition and including planer heads. spindle: 4 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Upstairs working width: 180 mm working height: 120 mm Ljdpfx Asybcb Esd Njrg feed: approx. 10 m/min

Condition: used, Year of construction: 2003, Technical details: pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm rapid traverse: 100 mm/sek dayligth: 444 mm throat: 350 mm table width: 124 mm table height: 888 mm stroke: 210 mm total power requirement: 15 kW dimensions of the machine ca.: 4500x2250x2900 mm weight of the machine ca.: 12,5 t Ledpfxoybb Ahj Ad Nsrg