Hydr. pressbrake
BAYKAL APH 2604x60

Name: BAYKAL APH 2604x60
Brand: BAYKAL
Availability: InStock

Year of construction

2004

Condition

Used

Location

Ahaus

Show map

Machine data

Machine type:: Hydr. pressbrake

Manufacturer:: BAYKAL

Model:: APH 2604x60

Year of construction:: 2004

Condition:: used

Price & Location

Location:: Ahaus

Call

Details about the offer

Listing ID:: A19922895

Reference number:: 1125-9308435

Update:: 05.09.2025

Description

pressure 60.0 t
chamfer lenght 2600 mm
distance between columns 2050 mm
column arm 310 mm
working feed 10.0 mm/sec
return speed 61.0 mm/sec
stroke 100 - 140 mm
dayligth 450 mm
table height 860 mm
oil volume 100 ltr.
Control ELGO P8822
operating pressure max. 200 bar
Number of working hours ca. 2.370 h
voltage 380 V
total power requirement 5.5 kW
weight of the machine ca. 5000 kg.
range L-W-H 3000 x 1850 x 2050 mm
good / well-maintained condition (!!)
with only approx. 2,370 operating hours
current new price approx. 60.000 euros
special price on request

in checked conditions - machine video -
?v=PsUeM3O5wAM

Equipment:
- NC electro-hydraulic press brake
- with ELGO NC control unit "P8822"
* Input of target/actual values ??for back stop
* Input of target/actual values ??for depth adjustment `
* swiveling operation, front left
* manual mode selectable
- NC controlled axes: Y1 + Y2 + X
- NC electro-motorized back stop, on ball screws
* with 4x manually adjustable stop fingers
* adjustment in R+Z axis (manual)
- Upper tool holder SYSTEM A (AMADA), with upper wedge crowning
* 1x split set of upper tools
* clamping jaws with clamping lever (quick clamp)
- 1x universally rotatable MULTI V die block
- 2x side-hinged doors (protective device)
- 1x rear sliding door (protective device)
Lrodpfx Ajw U U Ttsd Nog
- 2x front stable support arms
- 1x freely movable foot control (on rollers - movable)
- Operating instructions (PDF)

Seller

Last online: A week ago

Registered since: 2011

769 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Częstochowa

17,870 km

Press brake
AMADAITPS III

€5,900

fixed price plus VAT

Call

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Ledpfowq Dpqex Ad Nsrg Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

See details

Listing

Ennepetal

18,536 km

Exhausting system
KEMPER8310000006

Call

Listing

Laser cutting machine Prima Power Palatino 1530

Korschenbroich

18,581 km

Laser cutting machine
Prima PowerPalatino 1530

Call

Listing

Automatic circular saw KASTO GKS 400 AU/1200 CNC

Wiesbaden

18,584 km

Automatic circular saw
KASTOGKS 400 AU/1200 CNC

Call

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm Lredpfoz N Amex Ad Nog cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

See details

Listing

Zuchwil

18,807 km

Polishing machine
IMM72780

Call

Condition: excellent (used), IMM 72780 Double-sided polishing machine Lrsdsu Hanyopfx Ad Neg Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

See details

Listing

Jelah

18,113 km

PRESSBRAKES
BAYKALAPH 3100/10

Call

Listing

Mouscron

18,768 km

Press brake
LVDPPBL 135/30

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake PPBL 135/30 Year of construction 1990 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Ledpfx Adsw Hca Ho Njrg Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • R10.180.78. 6x508mm • Multi-V M90 1x3050mm

See details

Listing

Dinkelsbühl

18,523 km

Press brake
Dener AbkantpresseXL30220

Call

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails Ljdpfxjq D Dzle Ad Norg - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

See details

Listing

Saerbeck

18,451 km

Press brake
DURMAAD-S 30320

Call

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm Lrsdjfifg Hepfx Ad Nog stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

See details

Listing

Germany

18,384 km

CNC Press Brake
AmadaAPX 100 30

Call

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Lrodpfx Adewm Nn Rs Neg

See details

Advertise here

Hydr. pressbrakeBAYKAL APH 2604x60

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Hydr. pressbrake
BAYKAL APH 2604x60