Used Chair Manufacturing for sale (33,238)

Condition: used, Year of construction: 2000, tank capacity: 11,100 l, GENERAL Features: Discharge tap, crane lugs Design: vertical Year of manufacture: 2000 Notes: Manufactured according to DIN 6618; piping inside the vessel; base stand made of 1.4301 (V2A); manhole cover made of 1.4541 (V2A); discharge with bolted reducer Internal diameter: 1,980 mm Total height: 4,750 mm Max. overpressure: 0.3 bar Location: Bremen Technical documentation: acceptance certificate Nameplate: Vacuum: 0.1 bar Volume: 11,100 litres Cylinder wall thickness: 3.0 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 3,000 mm Last use: solvent Fsdpfx Aaeycllie Eepd VESSEL Heads: dished ends (Klöpper heads) Support type: skirt EQUIPMENT Manhole / dome: on top head (DN 600) Outlet: flange DN50 TECHNICAL DATA / DIMENSIONS Head wall thickness: 3.9 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21610229, Spring coiling machine WAFIOS ASF3; for torsion and leg springs. Wire diameter: 1.0–3.5 mm. Max. spring diameter: 50 mm. Leg length: 115x130 mm. Fedpfoyg Nitox Aa Ejpd Fully functional, including accessories (see pictures) and pay-off reel.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 27,500 h, machine/vehicle number: Seriennummer: S0711C001, Equipment: CE marking, documentation/manual, TruPrint1000 - Base Machine WITHOUT Laser Technical Specification of the Base Machine: TRUMPF TruPrint1000: Serial No.: S0711C001, Year of Manufacture: 2019, Installed: December 2019 Build Volume: Build cylinder diameter 100 mm, effective build area 97 mm, build height 100 mm Software Version: H.M.I. Version 02.22.04 Operating Hours: approx. 27,500 h* (of which 2,290 h production time) *status as of September 2023 Additional Information: Inspection and deinstallation of the machine were carried out by TRUMPF Service in September 2023. Until this point, the machine produced components in our production facility with very high quality (material used: copper alloy). With the machine, you will receive the operating manual and the service report from the latest maintenance in digital format. The most recent maintenance contract with the manufacturer was valid until May 2023. If you are interested or have any questions, please contact us by phone or email. Fpodpeyg Ifasfx Aa Eod

Condition: new, New pallet repair bandsaw. Fpedpju E H Nuofx Aa Ejd

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. machinery includes Winkworth mixers pot and bucket filling lines, capsule and tablet counters, sieves etc. Fpedpfx Aew Nivloa Eed

Condition: excellent (used), Year of construction: 2006, CNC WORKING LINE FOR DOOR FRAMES, comprising: 1 HORIZONTAL LOADING TRANSFER MOTORIZED, model 0190 T.C Loading buffer with horizontal transversal belts and motorized rollers with variable speed control. 1 gasket insertion unit on a horizontal groove, consisting of: - 2 motorized gasket roll holders - 1 pressure roller insertion unit - 1 cutting unit positioned near the end of the profile 1 cutting/drilling machine for finished cuts, model 01TFRD SPECIAL, referencing the upper workpiece. Suitable for cutting, drilling, milling, and hinge (anuba) insertion on door jambs. MACHINE CONFIGURATION: Worktable constructed of a solid steel frame, with a fixed left section and a movable right section. Electronically controlled positioning system, supporting a total of 6 machining units: 2 on the right, 2 on the left, and 2 on the upper bridge. 1 CENTRAL MOTORIZED SHUTTLE with CNC control for milling the ends of jambs. 1 HORIZONTAL RADIAL CUTTING STATION, 0-45°, quick tilting with selector, featuring 2 groups (one per side). Each side with its own motor, including a timed entry system to prevent double cutting positions. Cutting motor power: 5 HP – 3000 rpm – inverter-controlled. Cutting blade bore: 30 mm. Saw blade diameter: 370 mm. Adjustable extraction hoods and safety guards. 1 HORIZONTAL HEAD DRILLING STATION 0-45°, fast vertical tilt with selector, with 2 groups (right and left). 2 HP motor, 3000 rpm. 7-spindle drilling head with 32 mm pitch. Individually selectable spindles. Groups travel on linear guides for increased speed and drilling accuracy, with longitudinal and vertical adjustment capability. 1 UPPER VERTICAL ROUTING (PANTOGRAPHING) STATION, on a transverse bridge, with 1 motor for counterplate slotting, 2 HP, 12,000/18,000 rpm. Vertical, horizontal, and depth (x-y-z axis) movements are CNC-controlled, utilizing precision linear guides and recirculating ball carriages. Equipped with tool holder collet. 1 HORIZONTAL ANUBA DRILLING STATION, with 1 CNC-positioned motorized unit moving in conjunction with the router. Includes a drilling unit, custom Anuba inserting unit, and custom Anuba feeder with approx. 35 piece capacity (depending on Anuba diameter). 1 LINE CONTROL COMPUTER Capable of importing data (CSV or ASCII) via MMC (Memory Card). Fpedpfxoygcmfe Aa Ejd Note: The imported data will be used for automatic positioning and execution of processing steps as per the job list. Workpiece dimensions: Minimum length: 580 mm (45° internal for frame) Maximum length: 3000 mm (45° external for frame) Minimum thickness: 30 mm Maximum thickness: 60 mm Minimum width: 75 mm Maximum width: 300 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 1032, FBH 1200 Machine Track gauge 1710 mm, equipped with rubber wheels Fpsdpfoyf Uazsx Aa Esd FBH 1200 mobile, fully automatic vibropress for the production of hollow blocks, bricks, as well as blocks. *Output / 8 hours / 100%: 12,000 pcs hollow blocks. The step-by-step production line for small-size precast elements manufactures various concrete components on a smooth concrete surface, typically outdoors. The machine moves automatically during production. Above the production area, a power supply system is installed to provide power to various devices. The step-by-step FBH 1200 vibropress is supplied with concrete via a feed hopper designed for use with a forklift truck. The manufactured components remain at the production site until dry. Production area: 1100 x 1050 mm Height of produced elements: up to 380 mm A palletizer can be purchased for an additional fee—see last two photos.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Coburg Exaflex 6126’ treatment chair. Item for sale: 1 x Coburg Exaflex 6126br /> Condition: Fpjdpsx S E I Rsfx Aa Eed This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2017, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Fodpex Sv Uzofx Aa Ejpd Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 694-6367, For sale is a SCHÜCO KSM 235 clipping machine, year 2001, article no. 296757, S/N 694-6367, 230 V, approx. 150 kg, roller conveyor approx. 200 cm. The machine can be inspected at our company premises and, if desired, also tested. Fsdpfx Aaeycqq De Espd

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 27,500 h, machine/vehicle number: S0711C0001, laser hours: 2,300 h, laser power: 1,000 W, laser wavelength: 515 nm, working range: 100 mm, Technical Specification Base Machine: TRUMPF TruPrint1000: SN: S0711C001, Year of manufacture 2019, Installed December 2019, Build chamber: Build cylinder diameter 100 mm, effective build area 97 mm, build height 100 mm Software version: H.M.I. Version 02.22.04 Operating hours: approx. 27,500 h* (of which 2,290 h production time) *as of September 2023 Technical Specification Laser Unit: TruDisk 1020: SN L5210M0058, Power: Single laser, output power of 1000 W at the workpiece, green wavelength: 515 nm Operating hours: approx. 11,500 h* Additional Information: In September 2023, the system was inspected and deinstalled by TRUMPF Service. Fpedpfovptawsx Aa Ejd Up to this point, the machine produced components of consistently high quality in our production (material used: copper alloy). Along with the system, you will receive the operating manual and the service report from the last maintenance in digital form. The last maintenance contract with the manufacturer was valid until May 2023 inclusive. For further information or inquiries, please contact us by phone or email.

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Fsdpfx Aajya U Afj Espd Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: good (used), BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Fpsdpfx Aaepm H Has Ejd Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Condition: used, Year of construction: 1999, No. 6 roller blinds belts, motorized, for drying varnished chairs or similar products (see video) Available dimensions: mt. 4 x 22.5 mt. 4 x 24.5 mt. 4 x 24.5 mt. 2.3 x 27.5 Fedpjyaqy Tjfx Aa Ejpd mt. 2.3 x 27.5 mt. 2.3 x 27.5

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers Fpedpfsxlb E Ajx Aa Eed - spray booths - correspondence desks - various

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Fpodpfx Aaeu Szuce Esd Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Fodpswl Iw Uefx Aa Espd

Condition: used, Year of construction: 1971, operating hours: 85,000 h, functionality: fully functional, machine/vehicle number: 20194, working range: 250 mm, feed length X-axis: 170 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 1,600 kg, total length: 2,000 mm, total width: 2,500 mm, total height: 1,800 mm, input frequency: 50 Hz, input current: 8 A, pressing force: 7 t, compressed air connection: 6 bar, table width: 184 mm, For sale is a Bihler automatic machine, year of manufacture 1971, with approximately 85,000 operating hours. Fpodpfsx Tty Dsx Aa Esd The machine is fully functional and in ready-to-use condition. Bihler automats of this generation are renowned for their extremely robust, long-lasting construction and have been successfully used in industry for decades in stamping, bending, and forming applications. Despite its age, the machine has proven its industrial reliability and remains economically viable for a variety of applications. A significant advantage is the continued good availability of spare parts, both OEM and aftermarket, ensuring long-term maintenance and support. Ideal for series production, as a replacement or secondary machine, or for simple, robust applications. A live demonstration under power is possible by arrangement.

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Fsdpfx Aexwkuqoa Ejpd Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Laser system as an option.

Condition: used, machine/vehicle number: RT 282, Year of construction: 2008, operating hours: 25,000 h, gearing type: automatic, color: other, Year of manufacture: Mar 2008 Axle 1: left 10 mm right 10 mm Axle 2: left 10 10 mm right 10 10 mm Axle 3: left mm right mm Fsdpev Sr Sqefx Aa Eepd

Condition: used, Year of construction: 2008, operating hours: 25,000 h, gearing type: automatic, color: other, Year of manufacture: Mar 2008 Fjdpfx Aajv S Eu Se Eepd Axle 1: left 6 mm right 6 mm Axle 2: left 6 6 mm right 6 6 mm Axle 3: left mm right mm

Condition: used, machine/vehicle number: XLWRTXC2181694, Year of construction: 2012, operating hours: 25,000 h, gearing type: automatic, color: other, Year of manufacture: Feb 2012 Fpjdpfevzra Hsx Aa Ejd Axle 1: left 10 mm right 10 mm Axle 2: left 10-10mm right 10-10mm Axle 3: left mm right mm

Condition: used, Year of construction: 2012, color: other, Year of manufacture: Mar 2012 Fodpfx Ajv S Evvea Eepd Axle 1: left mm right mm Axle 2: left mm right mm Axle 3: left mm right mm

Condition: used, machine/vehicle number: XLWRT2839C2301615, Year of construction: 2012, operating hours: 20,000 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Axle 1: left 8mm right 8mm Axle 2: left 6 6 mm right 6 6 mm Fsdpfowd Na Usx Aa Eepd Axle 3: left mm right mm

Condition: used, Complete production line for the manufacture of slatted frames. From woodworking through to final assembly and packaging. Includes all components such as moulders, saws, profile processing, forklifts, compressors, etc. Fpedex S Scbepfx Aa Ejd The larger machines/plants are from around year of construction 2000. Consisting of: Production of solid wood rails: - 2 x Multiblade rip saws RAIMANN KR 450 + KS 310 - Optimising cross-cut saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling / Finishing of longitudinal rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC drilling and sawing units: - KOCH CNC drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing unit with stacking unit - 2 x ISE CNC woodworking centres / drilling units - ISE CNC machining centre for spring slats - 2 x Manual slat drilling machines Single machines: - GANNOmat CNC drilling and dowelling machine - Pnahans table routing machine - 2 x EiMa double mitre saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination sawing and milling machine - 2 x Multi-spindle drilling machines - 2 x Belt sanders - Spray booth - Various small machines Assembly: - Automatic assembly machine for standard slatted frames - Capping press / line - 14 x Pneumatic assembly tables Logistics – operating equipment: - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE high-lift/ electric pallet stackers - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system outdoor area - Batch of mesh boxes & Euro pallets - Various racking systems Packaging: - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Materials: - Remaining stock of timber / spring slats - Remaining stock of end caps / plastic parts - Miscellaneous remaining assembly materials Many more PHOTOS and detailed DATA available on request.