Used Chair Manufacturing for sale (32,305)

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - Knedpfsxuu Dkex Adqod 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 5,087 h, load capacity: 1,000 kg, lifting height: 5,000 mm, free lift: 1,640 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Vulkollan Rear tires type: Vulkollan Battery Volt: 48V Battery Ah: 465Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2014 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Sideshift, Kodpou D Tfaefx Adqend 3rd valve, full free lift, non-creeping tires, joystick, single pedal, 3-wheel, seat,

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Ksdpfxjxymd Tj Adqsnd Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Cylindrical grinding machine – external / Manufacturer: WMW / Type: SA 6U x 3000 / YOM/Completely overhauled: 2013 (machine overhauler/carried out by SerWeMa/Germany) Range of parts: Straightening rollers, grinding spindles, general shaft machining. Special feature: Machining with up to 6 steady rests. The machine can be inspected under power by appointment. TECHNICAL DATA: Working range: - Centre height: 260 mm - Max. swing diameter: 515 mm - Max. grinding length: 3.000 mm - Max. grinding diameter: 515 mm - Max. workpiece weight: 500 kg Knjdpexymdajfx Adqsd Workpiece headstock: - Speed continuously variable: 12.5 - 355 rpm - Centring tip: Morse K5 Tailstock: - Max. quill stroke: 40 mm - Centring tip: Morse K5 Grinding headstock: - Grinding wheel: * Max. outer diameter: 630 mm * Width max.: 125 mm EQUIPMENT: - Extraction system - Documentation - CE marking No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 695 h, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 1,755 mm, fuel type: electric, mast type: triplex, construction height: 2,405 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 – 4,999 kg Mast type: Triplex Technical condition: New Front tires – type: Non Marking Front tires – condition: 80 – 100% Rear tires – type: Non Marking Rear tires – condition: 80 – 100% Battery voltage: 80V Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 – 100% Fork extension, sideshift, fork positioner, Kjdpfxsxymc Ns Adqend 3rd valve, 4th valve, rear working light, front working light, heater, full cabin, full free lift,

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Machine weight 6400 kg Kodpfx Adjxyl Nnsqsnd Main Drive Number of axis 6 Bending length 3060 mm Stroke 300 mm Pressing force 1000 Kn This 6-axis SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It features a pressing force of 1000 kN, a bending length of 3060 mm, and a stroke of 300 mm. The machine is equipped with a CNC EC 20 control system and has a machine weight of 6400 kg. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake 100-3100 machine we have for sale. Contact us for more information. Application Types Bending

Condition: used, functionality: fully functional, control type: PLC-controlled, Hydraulic guillotine shear Manufacturer: EHT Model: EHS 13 - 31 Kodoxu Dyuopfx Adqond Cutting length: 3100 mm Material thickness: 13 mm Backgauge

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Condition: New machine Technical condition: New Front tyres type: Solid rubber (bandage tyres) Front tyres size: 16-5-11 1/4 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber (bandage tyres) Rear tyres size: 16-5-11 1/4 Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery type: PzS Battery year of manufacture: 2025 Knodoxymazopfx Adqed Battery condition: 80 - 100% Integrated charger

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Setup dimensions: 1200x80x1350 mm Fence jaws made of wood Including Holz Her 3-roller power feeder incl. stand With chassis Dimensions: to follow Weight: to follow Knedpfsxllxasx Adqod Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Knodpfx Asxyl U Rsdqsd

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Knjdpoxyl Nusfx Adqsd Technical Specification Driven Tools yes This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Knodpfx Adswfdbpjqed Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 1,200 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,930 mm, fork length: 1,150 mm, empty load weight: 585 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, High lift truck Load centre of gravity: 600 Fork width: 180 mm Fork thickness: 60 mm Knsdpfx Adjxymaujqod Mast type: Duplex Condition: New device Technical condition: New Front tyres type: Polyurethane Front tyres condition: 80 - 100% Rear tyres type: Polyurethane Rear tyres condition: 80 - 100% Battery voltage: 24V Battery Ah: 60Ah Battery type: Lithium-ion Battery year of manufacture: 2024 Battery condition: 80 - 100% CE certificate, Lithium-ion maintenance-free battery 24 V

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Well-maintained (ready for demonstration at customer site) Equipment and technical specifications: Console machine Working size X: 3,200 mm Working size Y: 1,470 mm Max. travel height Z: 325 mm Milling unit 7939, 6 kW (S6) Including laser pointer Including traveling disc tool changer 7996 with 18 positions Including stationary tool changer on the right side Including 7893 magazine for manual tool change position 8 consoles including 12 vacuum suction cups for 4-field machining 4 pneumatically raisable and lowerable loading aids Including hand control unit Including 3-field safety tread mats Including saw unit for sawing/grooving in X Including C axis 7997 Horizontal drilling units: 6 Vertical drilling units: 16 Double drilling spindle in X Kjdpfoxymfkjx Adqjnd Heat exchanger for control cabinet cooling CAMPUS software for CNC machining centers Vacuum pump 100 m³/h Weight: approx. 4,450 kg The tools shown in the tool changer are not included in the scope of delivery! Availability: by arrangement Location: Rhineland-Palatinate

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 1800 mm Knodoxyl Nhjpfx Adqsd Measurements depth 4000 mm Measurements height 1850 mm Machine weight 3500 kg Control Unit Brand FAGOR Main Drive Spindle speed range 40–2500 Number of axis 2 This Pinacho Taurus 260 was manufactured in 2000. A robust horizontal turning machine, it features a maximum turning length of 1500 mm and a diameter of 520 mm. Equipped with a spindle speed of up to 2500 1/min and a main spindle power of 11 kW, it includes accessories like steady rests, a hydraulic chuck, and tool holders. Consider the opportunity to buy this Pinacho Taurus 260 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 1991, functionality: fully functional, Oven for plastic processing Knsdpjwp Em Uofx Adqsd The oven can process thermo-plastics. Manufacturer: Reinhardt Model : VL Year of manufacture : 1991 No. : 8182 Connected load 50.2 kW Voltage 380 Volt Operating temperature 50 - 200 °C Carriage approx.: 2000 x 1200 mm W x D x 500 mm opening

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5000 kg Kodpfjxyl N Iox Adqend Measurements height 2747 mm Measurements depth 2439 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Number of axis 3 Control Unit Model WINMAX GEN 5 Brand HURCO Movement X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dimensions Machine Length 2180 mm Table Table Width 1020 mm Table Length 510 mm Table load 1350 kg Tools Slots in storage 40 Max weight 7 kg Media Internal cooling yes This 3-axis Hurco VMX 30i was manufactured in 2014. It features a 760x510x610 mm working envelope, a 1020x510 mm table, and a high-speed spindle at 12000 rpm with SK40 taper. The machine includes a 40-piece tool changer and a chip conveyor. Renishaw probes enhance precision. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2014, 1 unit used plasma cutting system Manufacturer: Air Liquide Kjdpfx Adow Hydisqond Model: Plasmatome 20B Year: 2014 Table size: 3,100 x 1,500 mm Cuts up to 20 mm mild steel Cutting source: Hypertherm PMX65

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 5000 kg Measurements height 2747 mm Measurements depth 2439 mm Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Control Unit Brand HURCO Model WINMAX 5 GEN Movement Knodpfxexyl N Uo Adqsd X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dimensions Machine Length 2180 mm Table Table Width 1020 mm Table Length 510 mm Table load 1350 kg This 3-axis Hurco VMX 30i was manufactured in 2018 and features a robust vertical machining center design. It boasts a spindle speed of 12000 rpm, a spindle motor power of 13.5 kW, and a tool changer with 30 pcs capacity. The machine dimensions include X=760 mm, Y=510 mm, and Z=610 mm, with a table size of 1020x510 mm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2008, Table Circular Saw METABO Model: THKS 315 C / 2.80 DNB Year of manufacture: 2008 Kjdexvquuspfx Adqond 3-phase 400 Volt 50 Hz Power: 2.8 kW Blade bore: 30 mm Saw blade diameter: 315 mm Mitre fence Mitre adjustment 45-90° Max. cutting height 90/45° Max. cutting width at parallel fence Carbide-tipped saw blade with alternate teeth Saw blade guard Table extension

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Knsdpfx Adsxyl Tgeqjd Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2010, condition: good (used), Forklift cross beam Manufacturer: SHB Lewa Attendorn Knsdsq Ap Hgepfx Adqsd Type : P-5-LGT 16,0 Year of construction : 2010 Max. Load capacity at 1200 mm = 10,000 kg Pressure P 125 bar Dead weight 2822 kg Front dimension 370 mm Center of gravity 437 mm Length 8,500 mm Tine length 2,140 mm External width 200 mm External thickness 70 mm Internal width 300 mm Thickness inside 90 mm

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: Kedpfxsvxbm Rs Adqjnd L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: used, Year of construction: 1990, functionality: fully functional, TIG welding machine Manufacturer: Messer Griesheim Model: 300 DC with hose package and torch Area of application: TIG - 2 stroke TIG - 4 stroke TIG - spot welding TIG - pulse welding tg with setting of pulse time Kjdpfxev Ini Ds Adqjnd for all metals except aluminum / stick electrode welding Welding performance at 35% duty cycle: 300 A Welding performance at 60% duty cycle: 230 A Welding performance at 100% duty cycle: 180 A Workpiece cable 50 mm² NSLFFÖÜ Electrical connection: 380 volts Fuse: 35 amps 15.2 KVA at 300 A Cooling type: F Insulation class: F External dimensions: 950 x 500 x 850 mm high used in good condition

Condition: excellent (used), Year of construction: 2019, operating hours: 2,183 h, Weld fume extraction unit, very lightly used Manufacturer: IVAT AIR FTouer 10,000 Year of manufacture: 2019 Dimensions (L x W x H): 1619 x 1675 x 3643 mm Motor: 7.5 kW Weight: 1280 kg Voltage: 400 V, 50 Hz Model: RS10.000P Filter tower for dust/fume Premium filter tower Airflow: 10,000 – 12,500 m³/h Motor: 7.5 kW, 400 V, 50 Hz Ivat energy package 5.5 – 7.5 kW With Siemens frequency converter incl. WLAN and room air quality sensor for 50% energy cost reduction Features: - Energy package - Room air control - Temperature control - Heating/cooling module - Spark/fire protection - Workplace analysis display Ksdpfx Asxpwcfodqjnd - TBD module (door monitoring) Original price: 39,800 Euro