Used Centre Lathe for sale (8,758)

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Ncedji Hb Szopfx Ad Nel Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: ready for operation (used), controller model: Siemens 840 T, empty load weight: 15,000 kg, swing diameter over cross slide: 430 mm, Dubbelspindel CNC-draaibank met hoog vermogen, ideaal voor flenzen en tandwielen. Uitgerust met duplex werkstuk Laad- en losrobot. Max. werkstukgrootte: Ø 355 x 430 mm Vermogen op beide spindels: elk 35 kW Snelheid: max 2500 tpm Ncodpoycmp Aefx Ad Nol Type: FR 23Q-2 CNC Duitse kwaliteit Swing over bed: Ø 355 mm Max longitudinal travel Z-axis: 250 mm Power on the spindle: 35 kW Number of speeds: max 2500 rpm Toolchanger: yes Number of tools: 2 x 8 positions

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Ncedpfx Adox A E Tfo Nsl Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: excellent (used), Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, TRAUB TNL 18 – CNC Swiss-Type & Short-Turn Lathe Ex Works, previously used in medical technology, rejection rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, productive in current use Included: High-pressure coolant system (KSS) + bar feeder Spindles & Machining Main spindle: motor spindle Max. bar capacity main spindle: 18 mm (optionally 20 mm) Max. main spindle speed: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter spindle: available Max. bar capacity counter spindle: 18 mm Max. counter spindle speed: 12,000 rpm C-axis counter spindle: yes Tooling System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Rear tooling device: 7 stations Max. simultaneous tools in cut: 3 Tool capacity: Standard: 22 Maximum (with multiple holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Large travel ranges for Swiss-type and short-turn operation Simultaneous machining with main and counter spindle: yes Coolant & High-Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High-pressure (option, included): up to 20 bar Flow rate: approx. 28 l/min Filtration fineness: 50 μm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. fuse protection: 63 A Rated power: 35 kW Connection load: 24 kVA Ncjdeycl Udepfx Ad Nsl Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (listing short text) TRAUB TNL 18, year 2013 CNC Swiss-type & short-turn lathe Main and counter spindles 2 turrets + rear tooling device High-pressure coolant included Bar feeder included Very rigid production machine Rejection rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine / Deep hole drilling – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Grinding bench DP07 – Grinding & polishing (implants) – 1986 Turntable blasting unit Rösler RWT 1000-I – Blasting cabin – 2012 Bending machine C 202 M – Bending – 1990 Schmidt hydro-pneumatic press – Press / hydro-pneumatic press – 2021

Condition: used, Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Ncsdpfsyclwlox Ad Nsl Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: used, Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows Ncsdpfeyclwfex Ad Njl - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: used, Year of construction: 2001, turning diameter 0500 mm Ncjdpfxjyclp Io Ad Nsl turning length 1000 mm control Heidenhain turning dia. over face-slide 290 mm spindle bore 70 mm spindle turning speed range 8- 2800 U/min feeds - longitudinal 0- 5000 mm/min feeds - cross 0- 5000 min rapid traverse longitudinal 8 m/min rapid traverse cross 6 m/min main drive 11 kW total power requirement 24 KVA weight of the machine ca. 2,7 t Control Heidenhain, for cone turning, contour turning and threat cutting. Running time: 34483 h. Machine comes with accessories such as chuck with many jaws, Multifix tool holder system with holders and tools.

Year of construction: 2023, operating hours: 3,635 h, condition: used, machine/vehicle number: 22260005, Max. workpiece diameter: approx. 200 mm, Number of spindles: 2, Number of tool stations: 12, Control unit: SIEMENS Sinumerik, 1 KUKA handheld control unit, Serial no.: 0062709, 1 chip conveyor, KNOLL 280 S-1/160, Year of manufacture: 2022, Serial no.: 1566310, Cooling unit: DELTATHERM RKV 5.5, Year of manufacture: 2022, Serial no.: 3-48097, Net weight: approx. 190 kg, Connected load: 400/460 V/50/60 Hz, 1 handling robot: KUKA Industrial Robot Cybertec-2 Series, Year of manufacture: 2022, Serial no.: 1306487, Net weight: approx. 282 kg, Payload: approx. 22 kg, 1 robot control unit: KUKA KR C5 Dualcap AC, Year of manufacture: 2022, Serial no.: 3131152, Connected load: 3 x 380-480 V, 50/60 Hz, 1 coolant filtration unit: KNOLL KF 150/950, Year of manufacture: 2022, Serial no.: 1566311, 1 air filtration unit: AFS 1100, Year of manufacture: 2021, Serial no.: 36957, Net weight: approx. 70 kg Ncjdpjx Aklgsfx Ad Njl

Year of construction: 2022, condition: used, machine/vehicle number: 710370, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Nodpfsx Akkvsx Ad Necl

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Nodpfx Ajx Aki Esd Nscl

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Nedpfxex Akixs Ad Njcl

Year of construction: 2015, operating hours: 18,025 h, condition: used, machine/vehicle number: 0031000248A, Stock No.: 394600, travel X/Z: 267, 5x600 mm, max. turning diameter: 400 mm, max. spindle speed: 4,000 rpm, net weight: approx. 5,200 kg, dimensions LxWxH: approx. 410x183(252)x190 cm, control: SIEMENS Sinumerik 840D sl, with SCHUNK 3-jaw chuck, 12-position tool turret, chip conveyor, steel cabinet, double-door, contents: various tool holders, approx. 60 pieces, partially equipped Nsdoyciuzspfx Ad Nscl

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 11756, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Ncjdpfxjyciw Ao Ad Nol Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Year of construction: 2014, condition: used, machine/vehicle number: 239319, recorded operating hours: 14,765 (as of 08/25), weight: 6,760 kg, 12-position tool changer, MAZATROL Smart control, lubricant processing system, chip conveyor, spindle stroke: 1,300 mm, max. machining diameter: 380 mm, SMW K3-ZSW steady rest, ATTENTION: Collection of this item only by prior arrangement!!! Ncsdoycitdopfx Ad Nol

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. Ncsdpfx Ajxf Iamjd Nel More specs of the machine, check last two pictures.

Condition: used, total height: 2,500 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 5.500 kg Price: On request - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12598 - Drive system: Teach-in - Power [kW]: 15.0 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Carriage turning diameter [mm]: 425 - Distance between centres [mm]: 2000 - Bed width [mm]: 450 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 310 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout, Removable bed Ncedswnhm Iepfx Ad Nol - Type of digital readout: Heidenhain Manualplus - Transport dimensions: 5000mm x 2200mm x 2500mm (l x w x h) - Transport weight [kg]: 5500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg Price: On request Nsdpfewnitiox Ad Njcl - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Weight: 16 t Working area Centre distance: 3,000 mm Cross slide diameter: 650 mm Bed diameter: 700 mm X-axis travel: -15 ... +335 mm Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading Ncsdpfxjychzms Ad Nel 400V, 50Hz

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Ncodoychtpopfx Ad Nol

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, spindle bore: 42 mm, rotational speed (max.): 6,500 rpm, power: 23 kW (31.27 HP), The machine on offer is a new stock machine. We are happy to prepare a customized machine offer for you. Ncsdpsychqusfx Ad Nol

Condition: excellent (used), Year of construction: 2019, CNC Lathe 2-Axis Doosan Puma GT2600 Year of manufacture: 2019 Control: Fanuc i Series with Manual Guide Max. turning diameter: 460 mm Max. turning length: 658 mm Spindle speed (belt drive): 3,500 rpm Ncodpsycgpcjfx Ad Nol Spindle bore: 81 mm SMW Autoblok chuck 250 mm Axis travel: - Z axis: 680 mm - X axis: 265 mm 12-position tool turret Tailstock Renishaw tool probe - chip conveyor with tank and pump - documentation - tool holders Operating hours: 2,700 hours Very good condition

Year of construction: 2002, condition: used, The machine has two working axes and two service axes (2+2), Y and X. Steady rest and tailstock are motorized. Nsdpfx Aeycguled Nocl Further details will follow...

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT Ncodpfx Aeq Nqkxjd Nel PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: ready for operation (used), Year of construction: 2019, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1360 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 700 mm DISTANCE SPINDLE NOSE-TABLE: 100-800 mm Nsdpfxsnzn I Eo Ad Nocl DISTANCE COLUMN-SPINDLE AXIS: 792 mm RAPID FEEDS X-Y-Z: 32 m/min SPINDLE: 12000 rpm; 11-16.5-20-28 kW; BBT-40 TABLE SIZE: 1400 x 700 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 75 (150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 7 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 9000 Kg OVERALL DIMENSIONS: 4670 x 2985 x 3105 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min Ncjdpswl R Ddofx Ad Nol SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER