Used Centerless Grinding Machine for sale (91,474)

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,500 mm, grinding diameter: 400 mm, TOS BHU 40/1500 Cylindrical Grinding machine, grinding diameter 400 mm, grinding length 1500 mm, very good technical and visual condition. Technical specifications: Grinding diameter: 400 mm Lajdoxphdmjpfx Ab Ujh Grinding length: 1500 mm Maximum workpiece weight: 300 kg Grinding wheel size: 600 × 150 mm Longitudinal table travel (X-axis): 1–1790 mm Rotating grinding head: ±45° Rotating table: ±5° Spindle taper: Morse 5 Maximum spindle speed: 1240 rpm Total connected power: 22 kVA Machine weight: approx. 6 t

Condition: new, Year of construction: 2025, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Ledpforwwt Sex Ab Ueah

Condition: good (used), Year of construction: 1997, Geldmacher engraving tool grinding machine GS 10 with collet set Ljdpfx Aoxpfc Tsb Ueah

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Lodpfewmw Dasx Ab Ujah

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1555 Measurements depth 2310 Measurements height 1950 Machine weight 2500 Main Drive Spindle speed range 3000/3600 Spindle motor power 2.2kW/3HP This 3-axis Proth PSGS-3060AH surface grinding machine was manufactured in 2008. It offers precision and durability for various grinding applications. Consider the opportunity to buy this Proth PSGS-3060AH surface grinding machine. Contact us for more information. Application Types Lajdpfjxn U A Tsx Ab Ueh Grinding

Condition: like new (used), Year of construction: 2018, Stöckel FX 60/30 ST 2 Stöckel FX 60/30 ST 2 Surface Grinding Machine with STÖCKEL ST-2 Control, Year of Manufacture 2018, in Excellent Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2018 Power supply: 3/N/PE Operating voltage: 400 V Control voltage: 230 V/24 V DC/130 V DC Frequency: 50 Hz Connected load: 14 kW / 21.5 A Main fuse: 32 A Max. grinding area: 630 x 300 mm Standard magnetic chuck dimensions: 600 x 250 mm Max. table longitudinal travel: 680 mm Laedpfewz Imhex Ab Ujh Max. cross travel: 305 mm Max. distance from table to spindle center: 650 mm Max. table load: 400 kg Table speed: 2 – 30 m/min Rapid traverse cross movement: 1.3 m/min Automatic cross feed: 0.3 – 40 mm (intermittent, optionally continuous) Rapid traverse vertical movement: 600 mm/min Grinding wheel (standard: outer x width x bore): 300 x 50 x 127 mm Rib width: max. 60 mm Grinding wheel motor rating: 5.5 kW Hydraulic pump power rating: 2.2 kW Cross travel power rating: 0.35 kW Vertical rapid traverse power rating: 0.75 kW Total connected power: 12 kW Total weight of the machine: 3600 kg Operating noise level: 80dB(A) according to EN 31201 Hydraulic oil capacity: 125 l Coolant capacity: 90 l Accessories and Equipment: - 1 piece coolant unit - Electronic handwheel - Extraction unit - Operating manual, electrical schematics - Machine mounting pads - Grinding wheel About the Machine: We are offering a Stöckel FX 60/30 ST 2 surface grinding machine with automatic cycle, year 2018, in very good condition. The machine is, of course, fully operational. All slides move very smoothly and uniformly. Even at high speeds, the Stöckel runs very quietly. This newer generation of grinding machines is extremely user-friendly and is capable of producing surfaces in the low Rz range. Take advantage of the opportunity to view this machine under power on-site and see its condition for yourself. About the Controls: The STÖCKEL ST-2 control system provides all the functions needed for economical surface and plunge grinding. Inputs are made using softkeys on the control panel, while all information is presented graphically in color on the display. The control is intuitively designed and easy to learn in a short time. No ISO programming skills are required. The control is suitable for both automatic grinding cycles and for manual adjustment via electronic handwheel. The operator can intervene in an ongoing grinding cycle at any time, changing parameters or taking over feed via the handwheel. The control features the following: • Surface grinding program subdivided into rough grinding, finish grinding, and spark-out • Plunge grinding program subdivided into rough grinding, finish grinding, and spark-out • Multiple-plunge program (for rapid material removal) • Automatic dressing: A regular automatic dressing cycle can be triggered during grinding based on various criteria such as "grinding dimension" or "number of strokes." Dressing before finish grinding is also possible. • When the "speed control" option is selected, different cutting speeds can be set for roughing, finishing, and dressing operations.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, center height: 165 mm, workpiece weight (max.): 300 kg, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 320 mm, spindle speed (max.): 410 rpm, Maximum grinding length: 1,000 mm Center height: 165 mm Maximum grinding diameter: 320 mm Maximum permissible weight between centers: 300 kg TABLE – Z AXIS Maximum automatic travel: 1,165 mm Rapid traverse speed: 6,000 mm/min Adjustability in both directions: +/- 6° CROSS SLIDE – X AXIS Travel: 200 mm Speed: 6,000 mm/min GRINDING HEAD Spindle speed: 1,420 rpm Grinding wheel dimensions (ø x bore x thickness): 400 x 127 x 60 mm Orientation range: +/- 45° WORKHEAD Spindle speed: 0-410 rpm Internal/external tool holder taper: Morse 4 / Asa 3 Tilt range: 90° TAILSTOCK Manual quill stroke: 40 mm Quilt diameter: 50 mm Internal connection taper: Morse 4 DIMENSIONS AND WEIGHTS Length: 4065 mm Width: 2550 mm Height: 2600 mm Weight: 4000 kg Machine complete with: • Closed steady rest • Open steady rest Laedpfx Ajxqhd Aeb Uoh • Dressing unit on table • Givi Measurements Vision 700 2-axis digital readout • Tank with paper filter

Year of construction: 2020, condition: good (used), controller manufacturer: SIEMENS, controller model: 840 D SL, CONTROLS .. CNC controls SIEMENS 840 D SL Lsdpfexn Icgsx Ab Uoah Microfinishing machine type Microstar 284 in vertical design with 8 workpiece holders and 4 microfinishing units for machining slide and counter ring grinding. - 6500 houers Workpiece spindles: 8 pieces Speed max 2000 rpm Number of finishing units 4 pieces max. speed 10'000 rpm max workpiece length 160 mm Loading height 1200 mm

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Model: SWR 50 T Completely overhauled: 2008 Delivery time: immediate Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Laodpfx Absu Ed Nls Ujh Total weight: approx. 5000 kg Control system: Siemens PLC

Condition: ready for operation (used), functionality: fully functional, grinding width: 240 mm, type of input current: three-phase, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Lasdpfxoufcnqj Ab Ush Motor 1, 1 kW

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Model PSG 63 – UAN Year of manufacture 1988 Grinding length 600 mm Grinding width 320 mm Maximum workpiece height 500 mm Lajdpfoxqbm Rox Ab Uoh Table longitudinal travel 750 mm Table cross travel 340 mm Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speed 1,500 rpm Rapid vertical traverse 400 mm/min Power 3.7 kW Automatic feed Magnetic chuck Coolant system Weight 2,500 kg Price: €2,500 plus VAT, ex-site

Condition: excellent (used), Year of construction: 2000, Jung Supromatic HF 50 EVO Jung Supromatic HF 50 EVO Surface Grinding Machine, year of manufacture 2000, in excellent, fully overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical specifications Clamping surface (L x W in mm): 600 x 200 Maximum grinding area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Maximum grinding wheel dimensions (mm): 225 (250) x 25 x 51 Table to spindle center distance (mm): Max. 400 Table longitudinal feed (reciprocating, m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Lajdpfowzmgyjx Ab Ueh Power output kW (with creep feed): 1.6 – 2.2 Approximate machine weight: 2.0 t Accessories and Equipment: • Magnetic chuck • Coolant system • Machine feet • Grinding wheel About the machine: We offer a Jung HF 50 EVO surface grinding machine, year 2000, in excellent condition. The machine is, of course, fully functional and has only approx. 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung operates very quietly. This newer generation of surface grinders is highly user-friendly and enables the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Scope of overhaul: Mechanical service: • Complete mechanical overhaul • Hydraulics • Infeed mechanism • Lubrication • Cross and vertical adjustment • Grinding spindle • Wheel dresser • Repainting in new machine quality Geometric service: • Guideway grinding by the manufacturer (optional) • Scraping of guideways • Column realignment, measurement, possible scraping/grinding, refitting with pressure plates, inspection and preparation of guideways • Adjusting crosshatch at spindle head • Alignment of wheel dresser • Regrinding of table and magnet • Machine acceptance according to manufacturer’s test sheet Electrical service: • Replacement of complete wiring, all limit switches and pushbuttons • Conversion of X-axis from cam switch to contactless limit switches (HF 50) • New control cabinet • RSF position display (2- or 3-axis readout) • Magnet holding force control for 24V or EP magnetic chuck Control modernization: • New auxiliary control cabinet (operator panel top right) • Thyristor control for grinding spindle drive • Manual cylindrical wheel dressing with top dresser or side dresser (for Diaform operation)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 94814, WEINIG Rondamat 960, Profile knife grinding machine Year of Manufacture: 2001 Technical Condition: Good Grinding length max. 240 mm Grinding arbor holder D = 50 mm and D = 40 mm Tool diameter min. 100 - max. 300 mm Grinding wheel diameter for profile heads min. 150 / max. 225 mm Lajdpoxp U Tnsfx Ab Ujh Grinding wheel diameter for planing heads 150 mm Grinding wheel width (ceramic, borazon, diamond) 2 - 3 - 4 - 10 mm Grinding wheel bore 60 mm Radial clearance angle grinding on the back of the knife 10 ° - 30 ° Side clearance angle grinding in manual operation 0 ° - 22 ° Clearance angle grinding for straight cutter heads up to 60 ° Grinding spindle drive 1,1 kW / 400 V / 50 Hz Grinding spindle speed 1700 - 3000 rpm. Coolant tank approx. 50 liters Motor coolant pump 0,18 kW / 400 V / 50 HZ Machine dimension Width 1.090 mm Depth 1.200 mm Height 1.500 mm

Year of construction: 1971, condition: good (used), 1 used cylindrical grinding machine, make Cincinnati, type R 75, year 1971 Ljdjhf I Icspfx Ab Usah centre height 130 mm grinding length 760 mm spindle bore 38 mm grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. max. grinding spindle double swivelling

Condition: ready for operation (used), Year of construction: 2005, Immediately available from site: CNC Cylindrical Grinding Machine TOS HOL – MONTA Type UN 63 / 750 / 2000 Lodoxqbftopfx Ab Uoah Year of manufacture: 2005 CNC Control: Sinumerik 840 Di Centre height: 375 mm Grinding diameter: 750 mm Grinding length: 2000 mm Grinding wheel dimensions: 750 x 100 x 305 mm Swing diameter in open steady rest: 40 – 250 mm Tailstock Morse taper: 6 Table swivelling: 4 degrees Workpiece spindle speed range: stepless, 1 – 50 rpm Grinding wheel speed: 20 – 33 m/sec Grinding spindle motor: 19 kW Total power requirement: 41 kW Workpiece diameter control Full enclosure Grinding mist extraction Weight: 20 t Complete accessories Price: EUR 28,500.— plus VAT, ex site

Condition: good (used), Year of construction: 1991, Technical data - Table surface: 800 x 450 [mm] - Grinding surface: 800 x 500 [mm] - Max. distance between table surface and spindle: 650 [mm] - Max. weight on the table: 400 [mm] - Spindle speed: 1400/1700 [tr/min] Laodpfx Abevx E Rto Ush - Dimensions of the grinding wheels: 350 x 127 x 50 [mm] - Dimensions of the machine: 3350 x 2100 x 1750 [mm] - Weight: 2900 [kg]

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm Lasdpfohr D Ayjx Ab Uoh spindle dimension 28 x 90 mm spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 and accessories

Condition: good (used), Year of construction: 1987, TSCHUDIN Type HTG-610 U660 TSCHUDIN Type HTG-610 U660 Cylindrical Grinding Machine, year of manufacture 1987, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. TECHNICAL DATA MAIN DATA Centre distance: 600 mm Centre height: 100 mm Total power requirement: 4-8 HP Lodpfsw Iqr Ssx Ab Usah MACHINE TABLE Table travel max.: 620 mm Table speed, stepless up to: 5 m/min Reversal delay up to: 4 sec Chuck base swivels: 7° GRINDING SPINDLE HEADSTOCK Wheel diameter: 300 mm Wheel bore (with 300 mm diameter): 127 mm Motor power with 300 mm wheel: 2.5 HP WORKPIECE SPINDLE HEADSTOCK Swivelling range: 360° Spindle taper: MT 4 Spindle speeds, stepless: 65-500 rpm Motor power: 0.5 HP TAILSTOCK Quill internal taper: MT 3 Quill stroke: 20 mm INTERNAL GRINDING ATTACHMENT Spindle diameter max.: 80 mm Motor power: 1.5 HP COOLANT TANK Capacity: 100 litres Dimensions (LxWxH): 2160 x 1200 x 1350 mm Weight: 2600 kg About the machine: We are offering a TSCHUDIN Type HTG-610 U660 cylindrical grinding machine with automatic cycle, year 1987, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Tschudin also operates very quietly at high speeds. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself. You can find further cylindrical grinding machines from reputable manufacturers on our website.

Condition: good (used), Year of construction: 1993, Graver grinding machine Laedpfx Asu T Nfxob Ujh Make: Deckel Model: S0 year of construction 1993

Condition: excellent (used), Year of construction: 2015, Okamoto ACC 64 CA Ledpfsxp H Iksx Ab Uoah Surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control, year of manufacture 2015, excellent condition. CE compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: - Year of manufacture: 2015 - Table size: 605 x 400 mm - Table travel: 800 x 440 mm - Distance spindle center (min/max): 22.5 – 522.5 mm - Max. load: 1000 kg - X axis longitudinal travel: 3000 – 25000 mm/min - Y axis crossfeed: 0 – 2000 mm/min - Rapid traverse: 4000 mm/min - Z axis infeed: 0.0001 – 0.001 mm - Rapid traverse: 1000 mm/min - Grinding wheel: 355 x 38 x 127 mm - Speed: 500 – 2500 rpm - Motor: 5.5 kW - Weight: 4950 kg - Dimensions: 3550 x 2695 x 2203 mm Accessories and features: About the machine: Offered here is a surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control. This universal surface grinding machine is in excellent original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. With a grinding path of 800 mm longitudinally and a cross travel of 400 mm, this machine is ideal for toolmaking, jig manufacture, and small batch production. The series stands out for its comprehensive standard equipment and ease of operation. The robust spindle head design and the double V-guideways in both longitudinal and cross axes ensure lasting precision. The intuitive operation of the control elements simplifies handling and significantly increases productivity. The guideways are automatically lubricated via a central lubrication system. The Okamoto has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Okamoto under power on site. You can find further surface grinding machines from reputable manufacturers on our website.

Condition: used, Year of construction: 1997, G+H (Geibel + Hotz), FS 635 SA Laodpfx Asxbzh Nob Uoh Year: 1997 Grinding area: 600x350 mm Weight: approx. 2,600 kg

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Laedpfxsvwdhhs Ab Ueh Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW

Year of construction: 1987, condition: good (used), 1 used steel grinding machine, make Solid, type DSCD Lajdpfx Asglf Hbjb Uoh

Condition: excellent (used), Year of construction: 1997, DETAILS PRECISION SURFACE GRINDING MACHINE Manufacturer: Lajdpfx Ajxqa I Tsb Ush JUNG Model: JF 520 Year of manufacture: 1997 Machine weight: 2200 kg Total weight: 2600 kg Location: Haiger Price: €24,000 excl. VAT Description: Serial no.: 3821, Digital readout, manufacturer Heidenhain, microprocessor control, profile dressing device, manufacturer Diaform, machine lighting, coolant system, magnetic clamping table. Technical Data: Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 600 x 200 Max. grinding wheel dimensions (mm): 225 x 25 x 51 Distance table/spindle center (mm): 350 (+50) Table longitudinal feed reciprocating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power kW (with creep feed): 2.2 (3.5)

Condition: good (used), Year of construction: 1994, Graver grinding machine Make: Deckel Model: S0 year of construction 1994 Laedpfx Abeu T Nf So Ueh