Used Centerless Grinding Machine for sale (83,937)

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Fedew T Sd Tspfx Ab Tjgk Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Year of construction: 1984, condition: ready for operation (used), General Data Machine weight 2700 kg Fgedpex E Ebdjfx Ab Tjk Workpiece Workpiece weight 130 kg This Kellenberger R125 x 600 cylindrical grinding machine was manufactured in 1984. It features a grinding diameter of 250 mm, a length of 600 mm, and a centre height of 125 mm. The machine can handle a maximum workpiece weight of 130 kg and includes a tailstock with a quill travel of 30 mm. For more information about this machine, please reach out to us. Application Types Grinding

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 360 mm gear width 210 mm max. module 7 min. module 0,5 Control Burri weight of the machine ca. 9,5 t Fsdsx E Dupepfx Ab Togk

Condition: used, Year of construction: 2011, grinding length 800 mm grinding width 400 mm workpiece height 370 mm table-size 1.000 x 400 mm Fodpfx Aex E Dpasb Tsgk max. table load 700 kg dist. center of grinding spindle - table 170 - 600 mm turning speed range - grinding wheel 1.425 U/min power capacity - grinding motor 5,5 kW Length movement of the table 900 mm table cross movement 450 mm table feed 5 - 25 m/min grinding wheel size 355 x 38 x 127 mm magnetic clamping plate 800 x 400 mm voltage 400 V total power requirement 8,0 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,00 x 1,65 x 1,95 m band filter unit 1,55 x 0,75 x 0,65 m switchgear cabinet 0,60 x 0,45 x 1,05 m hydraulic power unit 0,75 x 0,75 x 0,90 m suction device 0,90 x 0,40 x 0,65 m Available mid January 2026! - Serial-No.: 116907 - automatic vertical feed - coolant equipment with magnetic separator and paper band filter unit - electronic hand wheel - Coolant mist extraction unit - manual dressing device on Spindle head

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts Fgedpfx Aob A Hw Nsb Tjk

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Fodpfowp E Rgox Ab Tegk Machine weight: approx. 2,500 kg

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Fgedpow T Sc Njfx Ab Tjk Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Rotary Table Surface Grinding Machine Sweeping Type RS 6B Stock No: 14-10-008 Machine data: Year of construction: approx. 1988 L x W x H: approx. 2700 x 2000 x 2200 mm Weight: approx. 3500 kg Specifications: Grinding range: Diameter: approx. Ø 600 mm Grinding height: approx. 300 mm Magnetic clamping surface: approx. Ø 600 mm Drive power: approx. 15 kW Grinding spindle speed: approx. 1500 rpm Grinding wheels - diameter: approx. Ø 350 mm Accessories: - Segment grinding wheel Fgodpevtz Uksfx Ab Tjk Price on request

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1700x860x850 mm Fodpfxsvz Hzlo Ab Togk Weight 190 kg Total power requirement 1,5 kw

Condition: excellent (used), Year of construction: 2001, grinding diameter 350 mm grinding length 1000 mm centre height 180 mm Control Fanuc 180-T grinding wheel width 80 (100) mm grinding wheel diameter 450 mm power capacity - grinding motor 7,5 kW table speed -stepless- 10 m/min grinding spindle head - swivable ° turning speed range - workpiece spindle 10 - 800 U/min Fjdpfx Abehkunxe Togk grinding head swivelling 0 - 15 ° workpiece weight max. 120 kg taper in tailstock-quill MK 4 tailstock quill stroke 35 mm voltage 400 V total power requirement 18 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,75 x 2,25 x 1,80 m band filter unit 1,75 x 1,20 x 0,80 m - Serial No.6769 - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head

Condition: good (used), Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate -Magnetic plate: 360 x 122 mm Fgjdpfoikgdmsx Ab Tok -Traverse paths: x 390 mm / y 170 mm / z 260 mm -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Fgjdpoxt Ilfjfx Ab Tek Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1700x660x850 mm Weight 180 kg Total power requirement 3 kw Fgjdpjvz Hzfjfx Ab Tok

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Specifications Maximum longitudinal travel: 1500 mm Grinding diameter: 298 mm Fgsdsw T Ti Depfx Ab Tsk External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 × 2400 × 1600 mm Weight: 4800 kg Operating hours: — Power-on hours: — Condition: Rebuilt Compliant with local standards: — Status: Under power Technical features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table displacement [mm/rev]: 10 - Table speed range [mm/s]: 0.01–5 - Smallest table stroke [mm]: 3 - Wheelhead swivel [°]: ±90 - Centre sleeve taper [Morse No.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32–500 - Grinding wheel drive motor power [kW]: 5.5 - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 - Grinding attachment drive motor power [kW]: 0.75 - Machine dimensions [mm]: L=5400 / W=2400 / H=1580 / Machine weight [kg]: 4800

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x860x850 mm Fodpjvz Hy Uefx Ab Togk Weight 140 kg Total power requirement 1,5 kw

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Fgedsd Amifepfx Ab Tjk Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 650x1160x650 mm Weight 125 kg Total power requirement 3 kw Fgsdpsvz Hv Aofx Ab Tsk

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Fgsdjw T Sh Ejpfx Ab Tsk Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB All technical details are provided in good faith but subject to errors or omissions.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1160x550 mm Weight 85 kg Fgedovz Hv Nopfx Ab Tjk Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 820x1150x1580 mm Weight 450 kg Total power requirement 2,2 kw Fedpfxjvz Htze Ab Tsgk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Weight 1500 kg Fsdpfx Abjvz Hbfo Tegk Total power requirement 2,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3120x1100x1600 mm Fgsdpfx Ajvz Hanob Tjk Weight 2000 kg Total power requirement 6,4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3120x1100x1600 mm Fgodsvz E N Ispfx Ab Tok Weight 2000 kg Total power requirement 6,4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5600x1000x1550 mm Weight 2500 kg Total power requirement 6,5 kw Fgedevz E E Aepfx Ab Tsk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Weight 1500 kg Total power requirement 2,5 kw Fjdevz E Eiopfx Ab Tsgk