Used Centering Vise for sale (14,482)

Condition: used, thickness of jaw:100 mm Lasdpfscxxnyex Ab Ush opening of clamping jaw max.:150 mm dimensions of the machine ca.:0,2 x 0,3 x 0,1 m

Condition: good (used), Technical data: jaw width 160mm max. clamping 310mm 135mm height Ledpfx Asgbvd Ejb Ueah new sealed!! + spare jaws holds more than 24 hours pressure

Condition: used, thickness of jaw 160 mm clamping capacity 24 kN weight of the machine ca. 31 kg mechanical centric vice, Lsdpfed Ih N Rjx Ab Usah low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation

Condition: as good as new (ex-display), thickness of jaw 129 / 220 mm clamping width 85 / 275 mm high of jaw 40 / 63 mm weight 16 / 70 kg dimensions of the machine ca. 0,45 x 0,2 x 0,15 m Ljdou U T Tpepfx Ab Uoah Machine dealer with own stock of 1600 m².

Condition: used, thickness of jaw 153 mm 45 mm clamping width 125 mm Ljdpfx Aor D T Nujb Usah weight 29 kg dimensions of the machine ca. 400 x 300 x 190 mm - rotatable 360 - tiltable 45° / 20 - with crank

Condition: good (used), Hilma machine vice 200mm Lsdpfevpuw Dox Ab Ujah Good condition, fully functional. Jaw width 200mm, clamping range approx. 110mm.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! Laedpjvpgtqofx Ab Uoh TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt - Fully automatic process flow

Condition: excellent (used), functionality: fully functional, For sale: 2 centric clamps, 80-130 mm, mechanical Laodsvz H Irepfx Ab Uoh 1 centric clamp, 160-480 mm, mechanical 3 2-jaw pneumatic clamping blocks, 64 mm 4 2-jaw pneumatic clamping blocks, 100 mm 2 2-jaw pneumatic clamping blocks, 140 mm 1 2-jaw pneumatic clamping blocks, 160 mm 1 2-jaw mechanical clamping blocks, 160 mm

Condition: good (used), functionality: fully functional, overall weight: 125 kg, total height: 250 mm, total length: 700 mm, total width: 450 mm, -KOM 689- Offered here is a hydraulic vise in good condition. The vise is rotatable and tiltable with a 360-degree turntable. Lsdpfx Abewf Nd Aj Ujah Technical specifications: Dimensions: approx. (700 mm x 450 mm x 250 mm) Jaw width: 650 mm Jaw height: 200 mm Max. opening stroke: approx. 205 mm Weight: approx. 125 kg

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking Lasdpfovp Sd Ijx Ab Ujh and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: used, thickness of jaw 160 mm 50 mm clamping width 180 mm weight 37 kg dimensions of the machine ca. 450 x 240 x 130 mm mechanical vice Lodpfsr Dwa Uex Ab Usah in great condition - with crank

Condition: new, Item Machine vices new 47 x with jaw width 160 mm Weight 27 kg per piece 24 x jaw width 136 mm Weight 17 kg per piece Laodpod I Nhrsfx Ab Ueh all swiveling Total weight: 1650 kg on 2 Euro pallets.

Condition: used, Drive 11 kW, condition see picture Lasdpev Ahk Rsfx Ab Ush

Condition: good (used), Schunk KSF-Z Plus 160 Spring-loaded 2-jaw clamping blocks With a clamping force of 2500 kg The clamping block is opened using air, max 6 bar Excellent for horizontal machining centers or robot loading. Technical data: Dimensions: 160 x 160 x 132.2 mm Max. clamping force: 25 kN 2500kg Stroke per jaw: 3 mm Max. jaw height: 60 mm Repeatability: 0.02 mm Max. operating pressure: 6 bar Weight: 16 kg New price Schunk €3900 per piece 3 pieces available Laedpfx Abevn Rh Ns Ujh The price is net, excluding shipping and per piece Tel 0031 499570179 or 0031 629011138 Mvgr Arno

Condition: good (used), functionality: fully functional, overall weight: 135 kg, total height: 250 mm, total length: 900 mm, total width: 400 mm, -KOM 694- This hydraulic power vice features a 360-degree rotating base and a vertical crank. Technical specifications: Jaw width: approx. 200 mm Jaw height: approx. 65 mm Opening stroke: approx. 355 mm Lajdjwf Nc Sepfx Ab Uoh Dimensions: approx. (900 mm x 400 mm x 250 mm) Weight: approx. 135 kg

Condition: good (used), Centering in front of creel or other saws. Laodpfx Abjmhggus Ueh Lateral adjustment. Centering rollers. Lifting and lowering trough. Ideal also for model.

Condition: used, thickness of jaw 160 mm Lsdpfx Asp S Dclsb Usah 54 mm clamping width 315 mm clamping capacity 5,0 t weight 60 kg dimensions of the machine ca. 550 x 250 x 140 mm

Condition: used, Jaw width: 160 mm Opening width: 310 mm Turning plate Lsdpfx Abjrqwpwo Uoah

Condition: used, thickness of jaw 160 mm 53 mm clamping width 305 mm clamping capacity 5,7 t weight 60 kg Laedpfsp S Dcdox Ab Ueh dimensions of the machine ca. 700 x 160 x 145 mm

Condition: used, Jaw width: 135 mm Opening width: 115 mm Ljdou Sk Uhopfx Ab Usah

Condition: used, thickness of jaw 160 mm 50 mm clamping width 180 mm Lasdpfx Aer Dwa Rob Ush weight 37 kg dimensions of the machine ca. 450 x 240 x 130 mm mechanical vice in great condition - with crank

Condition: used, Jaw width: 125 mm Clamping width: 210 mm Laedpfx Aju Sh Hnjb Ush

Condition: used, thickness of jaw 160 mm 54 mm Lsdpfxjp S Dcho Ab Usah clamping width 315 mm clamping capacity 2,0 t weight 60 kg dimensions of the machine ca. 550 x 250 x 140 mm

Condition: used, Tilting Rotary Table Shelf diameter: Ø 300 mm Manual tilt vertically + horizontally Maxi vertically tilt: 90° Base/shelf height horizontal position: 250 mm Height in vertical 90° position: 400 mm Seating Surface: Length 450 mm x Depth 500 mm x Height 250 mm Weight: approx 200 kg Lsdpfxoxfa Ens Ab Uoah

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (min.): 24,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Lajdpjxnhtlefx Ab Ujh