Used Cantilever for sale (201)

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Rodpfxjurv E De Ag Aech

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed Rjdpfx Aouq Iy Rsg Ajch

Year of construction: 2011, condition: excellent (used), centrifugal single-stage vertical cantilever pump FIP ALFA V2CH 50-33 construction of year:2011 DN:50 Nominal flow 40 m³/h Nominal head 29 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz Rjdjh Rwafepfx Ag Ajch engine speed: 1450

Condition: used, Wall-mounted slewing jib crane DEMAG type KBK 2 Demag no. jib: KBK- 982 040 44 Demag no. wall bracket : 85104044 Year of construction 2000 Lifting capacity: 500 kg Outreach: 4000 mm Swivel range 270° Wall mounting plate: 1170 x 440 mm Height of lower boom to upper wall bracket: 1000 mm Flange plate wall bracket to center of bolt: 270 mm Total length of wall bracket flange plate to jib tip: 4330 mm: - Cantilever profile C-profile scissor lift DEMAG KBK 2 - Carriage for DEMAG KBK 2 C-profile trolley - Original paint yellow dead weight 170 kg very good condition Rcsdpfx Aetqwrvog Ash Price without chain hoist - chain hoist or crane can also be found in the store.

Condition: new, Pole pallet, manurack, mobilrack - new Mobile storage racks are used for storing goods of unusual dimensions and have a double purpose. They can be used as transport pallets and with the installation of 4 support tubes, they can be used to build storage racks which can be transported without having to reload the goods placed on them. Both heavy and light products can be stored on a metal pallet. Thanks to its simplicity and speed of assembly, Mobilrack can increase storage capacity in a few moments. At the end of the season, the pallet can be dismantled to save space in the warehouse. This offer applies to a single pallet/base: Commodity code: MTP000276 Length: 154.5 cm Width: 118 cm Bax3Ttyxrfw Height : 31 cm Load capacity : 1500 kg Finish: hot-dip galvanised Price : 82 euros / piece The offer concerns a double pallet /base/ : Commodity code : MTP000283 Length : 202.5 cm Width: 118 cm Height : 31 cm Load capacity : 2000 kg Finish: hot-dip galvanised Price : €120 / piece Each pallet of posts requires 4 cantilever tubes, available in different sizes according to the customer's needs: 120, 150, 200cm. The offer concerns a tube for a Manurack 120×6 cm rack: Rcedpfx Agsu Trpyj Ajh Product code : MPP000706 Height (cm): 120 Thickness (mm): 2,9 Diameter (cm): 6 Price : 7 euro / piece The offer concerns a tube for a Manurack 150×6 cm rack: Item code : MPP000704 Height (cm): 150 Thickness (mm): 2.9 Diameter (cm): 6 Price : 8,50 euro / piece The offer concerns a tube for a Manurack 200×6 cm rack: Item code : MPP000705 Height (cm): 200 Thickness (mm): 2.9 Diameter (cm): 6 Price : 11,50 euro / piece Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. To check wholesale and retail prices within Poland, please contact us. * I have large quantities ... * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Year of construction: 2006, condition: like new (used), Rotating device cantilever, braked for jigmaking, toolmaking for assembly, welding, painting etc. with foot remote control, right / left switchable with warning light during operation machine is technically in new condition, almost unused weight 1250 Kg dimensions: Height to axle center 1000mm mounting plate 400 x 400 mm hole spacing approx. 240 x 240 mm Rcjdpfxehtzuve Ag Aoh outer dimensions box part 1000mm x 850mm there are more machines of this type in different sizes in stock. load capacity up to 5000 Kg new price of the machine over 20.000.-€

Condition: new, 1860 m³/h Pressung 2.900 Pa Rcjdpfjhp S Trsx Ag Aoh 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) Rcedpfx Agowkpyhs Ash - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Condition: used, Year of construction: 2015, functionality: fully functional, Small lab Z-arm mixer / double sigma mixer Double jacket => heating with hot water or hot oil is possible Rjdexlrakjpfx Ag Ajch

Year of construction: 2015, condition: used, Cutting height max. 140 mm Motor output 11 kW cutting width 600 mm Cutting length 6200 mm Rsdpfjwk N U Ejx Ag Ajch Dimensions (L/W/H) 8400x1900x2090 mm Weight 3500 kg Number of working hours 3331 h Raimann FlexiRip "Jrionline" Automatic Longitudinal Circular Saw ----- Cutting length 6200 mm Machine base, carriage, feed ----- - Motor according to IE3 standard: 11 kW (15 HP) - Precise cutting thanks to the self-supporting, torsion-resistant steel construction and carriage guides on generously dimensioned, hardened, and ground round steel tracks. Extra-long and wide carriage with ball-bearing rollers, precisely adjustable and play-free via eccentric axes. - Clean cutting thanks to the stepless height adjustment of the saw blade for quick and optimal adjustment of the saw blade projection to the workpiece thickness. (Levels 1-18) - Continuously adjustable feed speed via pedal across the entire cutting length from 1-80 m/min - Potentiometer for presetting the maximum feed speed - Anti-blocking system for FlexiRip: If the maximum permissible load is exceeded, the saw blade automatically lowers to prevent jamming. The saw carriage then returns to the start position. Your advantage: Reliable protection against machine overload and sawblade jamming - Saw shaft speed: 2,900 rpm - Maximum cutting height: Sawblade diameter 400 mm: Max. cutting height 65 mm Sawblade diameter 450 mm: Max. cutting height 90 mm Sawblade diameter 500 mm: Max. cutting height 115 mm Sawblade diameter 550 mm: Max. cutting height 140 mm Width stop and machine table ----- - Width stop adjustment via several control levers on the front of the machine for precise positioning of the stop with a large digital display, easy to rotate and tilt. - Width stop in a cantilever design with 6 pneumatically pivoting stop cams - Smooth, even, and backlash-free operation of the stop - Width stop driven by 2 hardened, ground ball screws, 32 mm diameter - Maximum usable width (standard): 600 mm - 6 cross chains in the rear machine table, including an extension to the vibrating feeder with roller conveyor transfer (L = approx. 600 mm) to the vibrating feeder. Chain distribution according to the layout plan Control System ----- - Electronic machine and stop control "PLC control" with easy-to-read touchscreen on the left side at the start of the cut, mounted at eye level, easily adjustable for rotation, tilt, and height. Ten different cutting lists can store 10 width dimensions each and easily retrieved by touching the screen. These dimensions can be accessed either absolutely or as consecutive dimensions, the latter for working from back to front. Furthermore, for the consecutive sequence from back to front, five different dimensions with target quantities can be stored for automatic board cutting. - The width stop's free travel function can be selected via the touchscreen. - Error diagnostics via error display and cause note in plain text on the screen. Hour and cut counters for precise recording and output of production output. - Rotatable control panel on the swivel arm is particularly advantageous when cutting large-format panels. Operation and Tools ----- - Workpiece clamp mounted on the upper guard beam, inside the slats. ...

Condition: used, Complete Factory Package for Processing PVC and Aluminium Profiles – Block Sale Rodpfxov Ig Hhs Ag Asch Includes the following machinery: 1️⃣ Welding and Cleaning Line – ProfteQ QUADOS Including: 4-head welding machine QUAD OS12 + transfer/cooling table + CNC corner cleaning machine FRT9 + automatic loading table 2️⃣ Machining Center – Mecal MC 304 Atlas 4-axis machine equipped with a head for frontal machining, specifically designed for aluminum processing. 3️⃣ Double-head cutting-off machine – FOM ALVA 500A – year 2005 Blade: Ø 500 mm – Blade inclination: external 4️⃣ Cold Saw – ALTECH GOTHA (complete with roller conveyors) Single-head ascending blade saw Ø 600 mm, blade tilting -45° / +45°, blade rotation with digital angle display. 5️⃣ Glazing Bead Cutting Machine – RobTech MAESTRO Designed for cutting aluminium and PVC glazing bead profiles with four blades positioned at 45°. 6️⃣ Single-head cutting-off machine – MG TLG 350 Blade Ø 350 mm – Table rotation: 45° - 0° - 90° 7️⃣ Two-Head Drilling Machine – FOM 8️⃣ Vertical Assembly Bench for Glass and Glazing Beads – ProfteQ BV7 + Bench – Rotox VPAH 3023 9️⃣ Assembly Table – FOM 🔟 Double-Sided Cantilever Rack – 1 Block (9 Shelves per Side) (Multiple units available). 11️⃣ Electric Forklift – Career R30N S (4 wheels) Capacity: 3,000 kg, complete with side-shift. 12️⃣ Electric Order Picker – OM XOp Capacity 1,200 kg, lifting height 6,725 mm, fork length 800 mm.

Condition: like new (used), Year of construction: 2006, 2000 kg load capacity Rcsdpfx Ajhwv R Dsg Aoh Cantilevered rotating device with brake for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control right/left switchable with clamping frame for elevation of approx. 1000 mm Machine is technically in new condition, almost unused Dimensions: Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacities from 500 kg to 5000 kg

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg Redpfx Aokm Ryneg Aoch mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Year of construction: 2025, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt Rsdpfowkpvvsx Ag Ajch - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Rcjdpfx Ast Uc Iqjg Aoh Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Rcsdpopiarnefx Ag Aoh Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT Rcedpfxothg Dio Ag Ash REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 2000 kg load capacity Cantilevered rotating device with brakes for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control Rcodpfx Aehwv Rveg Ajh right/left switchable Machine is technically in mint condition, almost unused Dimensions: Height to center of axle 850 mm More machines of this type in various sizes are in stock. Load capacities from 500 kg to 5000 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, year of last overhaul: 2025, Complete production line for plastic windows (Rehau profiles) The plant remains operational and can be inspected while in use on site until December 2025. From December onwards, it will be available for dismantling. The automatic 4-head welding machine with corner cleaner can also be purchased separately – or together with the entire production line. The line is fully equipped and immediately ready for operation – ideal for the direct manufacture of plastic windows. All machines are in excellent condition. Cutting / Preparation: • SD25 Cross-cut saw • RU-VGPA3 • Macc metal saw • Wegoma V6/S water slot milling machine • Wegoma GL142P glazing bead saw • Wegoma AFK125 counter milling machine • Wegoma SK212 olive drill automation • Profile cutting trolleys (2 units) Welding & Processing: • Urban AK86250-35/25 – 4-head welding machine • SL2V double-head welding machine • Welding jaws incl. trolley • Urban SY530B corner cleaning machine with drilling unit • Wegoma SBA 1TS screw automation • Powerseat automatic screwdrivers (2 units) • KFM Urban copy router Rodpfexg Al Tsx Ag Ajch Extraction & Compressed Air: • Elektra Beckum SPA1000 extraction unit • Leoy Somer extraction unit • Kaeser SK 21 compressor • Schneider compressed air tank • Schneider air dryer Conveying Equipment & Storage: • Transport trolleys (7 units) • Cantilever racking (3 units) • Ruchser stop table • Gasket roll-off trolley • Side table at cleaning machine • Rack with rollers • Vertical stop table (2 units) • Horizontal stop table • Fittings rack with template • Heavy-duty rack (1 unit) Additional Equipment: • Manual squeegee tool • MD/230V swinging crane with suction lifter Software: • ProLogic software incl. 1 PC

Condition: new, Load Weight Shelf 14000 kg Loading weight per level 2000 kg Number of load levels 7 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions 3,8 x 0,9(1,35) x 2,45 m Rcsdpfx Agefgyg De Aoh

Condition: new, Load Weight Shelf 12000 kg Rcsdpfx Aefgyg Rsg Aeh Loading weight per level 2000 kg Number of load levels 6 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm dimensions 2,3 x 0,9(1,35) x 2,45 m

Condition: new, Load Weight Shelf 20000 kg Loading weight per level 2000 kg Number of load levels 2 x 5 Stk. Rodpfxsfgyg To Ag Aech Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions m

Condition: new, Load Weight Shelf 24000 kg Loading weight per level 2000 kg Number of load levels 2 x 6 Stk. Recommended material length 3000 mm Column width 1500 mm Rcjdpfx Asfgyhgsg Ash Shelf height 2440 mm dimensions m

Condition: new, Load Weight Shelf 6600 kg Loading weight per level 1100 kg Number of load levels 6 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Rjdjfgyhijpfx Ag Aech Shelf height 2440 mm Compartment width 800mm mm

Condition: new, Load Weight Shelf 12000 kg Loading weight per level 2000 kg Number of load levels 6 Stk. Rcedpefgyg Aefx Ag Ajh Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions 3,8 x 0,9(1,35) x 2,45 m