Used Cantilever for sale (229)

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Bedpfxsfivg Re Ai Nowr Profiles: frame: IPE220, arms: IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: new, Year of construction: 2025, Cantilever racking for light loads, single-sided, frame height 2m, rack length approx. 3m, arms 50cm deep, 200kg per arm, hot-dip galvanized – new product: Bwodpfxoxbz Ddj Ai Nor Price ex-works including loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport cost on request! Manufacturer: Bruckamp Year of manufacture: New Model: Super Light Set components: 4 uprights with 5 arms / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 with welded arms at approx. 330mm intervals. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Includes floor anchors Includes load rating plate Description: Set of 4 uprights with 1m bay width, including all bolts. Key advantages: Easy assembly – the rack is designed for quick and straightforward installation. Versatile use – whether in the garage, workshop, or for small spaces, the rack adapts flexibly. Safe & practical – the rectangular arms feature plastic end caps to prevent injuries.

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands 3420,- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf stands, double-sided, approx. 4.16 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 4160mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load center of 600 mm 750kg per arm / 2250kg per stand side Bodpofivhfefx Ai Nowr with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2020, condition: new, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Bjdpfx Aisfivhgo Newr Price ex location including loading! 1 shelf unit with 4 stands € 3.210,- (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf stands, double-sided, approx. 3.50 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 3500mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center of 600 mm 750 kg per arm / 2250 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: good (used), Year of construction: 2019, Racking Hall consisting of cantilever and pallet racks, OHRA, floor area approx. 867m² – used –: Price ex location: €99,500 (net), for self-dismantling! Price for dismantling available on request. Material to close one gable side is also available at extra cost! Manufacturer: OHRA Year of manufacture: 2019, sheet metal 2021 Hall dimensions: Width: approx. 17.35m Length: approx. 50m Height rack: approx. 6,385mm Ridge height: approx. 7.10m After disassembly, one long side of the hall remains open (where it currently adjoins the existing building) Cantilever racking: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20m Arm load: 1,400kg Load center: 600mm Post load per side: 4,200kg Axle spacing: 2m Arms are plugged in Arms have load deflectors, preparation for unrolling protection Incl. pallet beams Base level plus 3 arm levels per side Total depth: 2.70m (2 x 1.20m plus 30cm frame) Aisle width: 3.25m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet racking: Manufacturer: OHRA System: pallet racking P3 Year: 2019 Bay width: 2,900mm, four bays at length 2.40m Bay load: 2,000kg Field load: 6,000kg Top edge 1st support (buckling length): 800mm 1 row with 17 frames, 1 row with 19 frames (there are pipes at two locations) Number of frames: 36 Rack length: approx. 48.10m Frame depth: 1.10m Frame width: approx. 10cm Beam height: approx. 10cm Beam thickness (bearing surface): approx. 5.5cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pcs at 2.90m and approx. 24 pcs at 2.40m length Snow load zone: 1 (0.65kN/m²) Wind zone: 1 / Terrain category 0.48kN/m² Available: immediately Bjdpjyk H Riofx Ai Njwr Condition: good, slight rust on outer frames and faded paint Location: Hockenheim region Drawing available as PDF, parts list, structural calculations. The sideloader shown in the photos is also for sale at extra cost (it recently received a nearly new battery for approx. €9,600 net).

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: MING1+11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,050 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,050 mm, axle spacing: 1,900 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 7,000 kg, Equipment: double-sided, OHRA K60K - Double-sided cantilever rack, long goods rack, heavy-duty rack Two racks are available!!! 12 uprights - 48 cantilever arms K60K Height 3.05m - Uprights IPE200 - Upright spacing 1.9m center-to-center Total depth approx. 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Bwedpfev Smk Iex Ai Njr Incl. wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Consisting of 15 uprights + 60 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7500kg Bwedpfx Asv Smm Nei Nor Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code Bwodpfx Aiov Smr Ss Njr

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Bwsdpfx Asd Tbbdsi Ner Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Bodpfxsmhhx Ij Ai Nswr - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Bwodpfx Aemhhyasi Nsr - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Bodpfx Asd Tqalsi Nowr Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles Bedpfx Aijh Ek Daj Nswr - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Bjdefdkb Uepfx Ai Newr Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Bedpfx Aijmhhf Ss Newr Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Bedpfx Aomhhl Hei Njwr Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Bwedsmidyfspfx Ai Njr Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles Bwedpfsmkixwex Ai Nsr - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm Bsdpfx Ajfdkbhoi Nswr - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Bwjdpfxeqt Dmys Ai Nsr Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), painted with cover belt 1000 mm wide length A-A = 20 m smooth belt can be divided into 3-5 m sections Bedsr Ha Tljpfx Ai Njwr free loaded ex works (already on yard) The price is 2,500 EUR net, negotiable. Offer subject to prior sale and availability.

Condition: like new (used), Almost new cantilever racks, single- and double-sided, available from stock. Loading marks may be visible on the system. Available quantity: 20 pcs System dimensions: Arms: base + 5 arms, 80 cm long Load capacity: 160 kg/upright Uprights: 4 pcs, 2500 mm high, 90 cm upright spacing Load capacity: 1000 kg/upright Total system length: 3300 mm Total system depth: 1100 mm Bodpexcn Eksfx Ai Njwr Single-sided: 1090 EUR Double-sided: 2000 EUR

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Single-sided rack with 6 supports and 24 arms 6 sets available Price: €5,000 per set Length per arm: 1,500 mm Bwedpfxjyu S Afj Ai Ner Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Double-sided rack with 6 supports and 48 arms 3 sets available Price: €7,500 per set Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Bjdsyiat Eepfx Ai Nowr Load per upright (IPE 270): 6,000 kg

Condition: good (used), Year of construction: 2000, Offer 25521 Double-sided long goods – cantilever racking without contents Technical specifications: - 2 pieces of double-sided cantilever racking, each consisting of - 5 uprights with boltless system, height-adjustable storage arms - Length per rack approx. 4150 mm - Total length approx. 9300 mm - 130 storage arms - Upright height each approx. 6000 mm - Width of upright + support arms approx. 1700 mm - Max. arm load approx. 400 kg - Max. load per upright approx. 5000 kg - Axle distance between rack sections connected with diagonals approx. 1.0 m - Increment for arm height adjustment 125 mm - Arm dimensions L 700 x W 90 x H 70 mm - Upright dimensions W 250 x H 100 mm - Weight per upright approx. 400 kg - Weight per arm approx. 10 kg Bwedpfx Aisx R Si Ee Ner