Used Solid for sale (3,537)

Condition: ready for operation (used), Drill diameter: 16 mm Spindle mount: MK 3 Overhang: 240 mm Quill travel: 100 mm Spindle speeds, infinitely variable via pole-change motor and 2 groups: 250 - 4000 rpm Drive motor: 380 V, approx. 1/1.3 kW Approximate footprint: 2200 x 620 x total 1770 mm Gedpfx Akozh H Nxj Usug Approximate weight: 280 kg

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Handover: in current condition as viewed -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm Godpjututcsfx Ak Ujug -Recess: Ø 120 mm -Price/Delivery: complete -Dimensions each: Ø 570 x 160 mm -Weight: 48 kg/piece

Condition: good (used), Drilling machine, drill press, pillar drill, column drill -Manufacturer: Solid, column drill type SHW 30 -Motor power: 1.1 kW -Speed speeds: 70 - 1980 rpm, 7 levels -Table size: 270 x 270 mm, travel 630 mm -Clamping table: pivotable on vice device -Spindle holder: MK3 with drill chuck -Spindle stroke: 120 mm -Throat: 280 mm -Column Ø: 110 mm -Accessories: including foot control Gedpfxoqxvxlo Ak Ueug -Dimensions: 860/640/H1850 mm -Weight: 273 kg

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. Gusdpjzlhp Usfx Ak Usg In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: good (used), 1 x bench drilling machine Solid TB 16 in technically good condition. Technical data: Mount: MK 2 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Accessories: Quick-action chuck 1 - 13 mm Drift key Guedpfx Ajwyw Apok Usg The machine can be inspected under power.

Condition: used, Year of construction: 1998, Technical details: bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 Guodpfx Aeu Idutek Usg spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Condition: like new (used), - TOPSOLID’PDM SERVER license - TOPSOLID’DESIGN PRO license with USB dongle - TOPSOLID’DESIGN PRO + CAM M2 + PP HAAS – FANUC license with USB dongle Guodpfszbyb Nox Ak Uog

Year of construction: 1998, condition: good (used), Robust Tool Grinding Machine DS CDN Tool grinding machine, grinding machine, angle grinding machine, lathe tool grinding machine, steel grinding machine - 4 grinding stations - 3 angular tables on oscillating tables - 1 vise for chip-breaking groove - max. steel cross-section mm - Dimensions 1000/1100/H1500 mm Guedpfedzdumjx Ak Ueg - Weight 336 kg

Year of construction: 1965, condition: used, Drilling diameter 30 mm total power requirement 0,74 kW Machine weight approx. 0.35 t drilling capacity in steel (diameter) 30 mm throat 300 mm drilling stroke 120 mm mounting MK 3 table surface 335 x 280 mm groove width 14 mm table adjustable in height 510 mm distance spindle/table max. 120 - 630 mm column base area 380 x 400 mm distance spindle / base plate 1160 mm Speed range - drilling 200 - 2500 rpm speed steps working spindle 4 column diameter 100 mm machined base plate: Yes table rotation approx. 180 ° space requirement approx. 0,9 x 0,4 x 1,9 m Godpfx Akem Sg Tbo Uoug Control conventional

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Guodpfx Ajfym Husk Ueg +++++

Condition: used, Motor with 3 speeds cleaned, function tested, trial run used Make: Solid Type: B 16 Machine no.: 532377 Morse taper spindle Drill chuck: keyless/keyed 2 x keyless x keyed Throat depth: 250 mm Spindle stroke: 100 mm Gusdpfxsw En H Ae Ak Ujg 21 speed steps from 200-2800 Motor: 3 speeds Lighting Table size: 330 mm x 330 mm Machine vice Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition No warranty or guarantee

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels, tires with rims, trailer tires, heavy-duty tires, heavy-duty wheels -Manufacturer: Ecotrack, solid rubber tires 2 pieces with rim -Tire size: 7.00-12 RIM 5.00 S -12 Guodpfov A Thzex Ak Usg -Rim: bolt circle Ø 220 x 32 mm -Recess: Ø 170 mm -Dimensions each: Ø 610 x 180 mm -Weight: 53 kg/piece

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge Godoxab Nqepfx Ak Usug - LED machine light - Chip back wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1675 kg. range L-W-H 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard Gujdpfoxab H Asx Ak Uog - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: used, Mit der BAHMÜLLER ZH 29 Drahtheftmaschine werden Wellpappe und Vollpappe mithilfe von Heftklammern aus Flachdraht formschlüssig miteinander verbunden. Die BAHMÜLLER Heftmaschine ZH 29 wird mit einem Heftschuh und einem Auflagetisch ausgerüstet, um größere Zuschnitte leichter handhaben zu können. The BAHMÜLLER ZH 29 Wire Stitcher uses flat-wire staples to join corrugated and solid board together in a form-fit manner. The BAHMÜLLER ZH 29 stitcher is equipped with a stitching shoe and a support table to handle large size blanks. Drahtheftmaschine / Wire Stitcher BAHMÜLLER ZH 29 Baujahr / Year 1999 - Serial-No. WH-03562 Ausladung / Projection 1250 mm Standardheftleistung / Stitch Capacity 300 Klammern/min. (staples/min) Heftgutstärke bis 25mm / Board Caliper Up to 25 mm (1”) Klammerbreite / Staple width 15mm oder (or) 18mm Technical Details: Stromaufnahme / power supply 0,25 KV/A Nettogewicht / Weight ca. 400kg Platzbedarf / Space requirement L 1660mm x B 430mm H 1580mm Gusdpfxszynlrs Ak Ujg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, FULL-BODY AUGER STEEL, TOTAL APPROX. 7,49 M Guedern Uxispfx Ak Ujg Type: Full-body auger steel Diameter: 160 mm Round housing: galvanized steel Complete length: 7.49 m Length: from round housing with motor and gearbox

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Tire size: 23x9-10 (225/75-10) RIM 6.50 F-10 Guodpfxov Df T Eo Ak Ujg -Bolt circle: Ø 160 x 20 mm -Recess: Ø 110 mm -Price/Fee: complete -Dimensions each: Ø 550 x 215 mm -Weight: 58 kg/piece

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Rigdon, solid rubber tire SE 90 with rim Guedpfx Ajv Df Txok Uog -Tire size: 16x6-8 -Rim: 33R-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm Quantity: 1 piece available -Dimensions each: Ø 380 x 165 mm -Weight: 20 kg

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels Gjdsv Df Tropfx Ak Usug -Manufacturer: Bergougnan, solid rubber tire with rim -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm Quantity: 1 piece available -Dimensions: Ø 430 x 160 mm -Weight: 30 kg

Condition: excellent (used), functionality: fully functional, MONDINI EVOLUZIONE SUPER E380VG PET Packaging Line for Solids and Liquids MONDINI EVOLUZIONE SUPER E380VG automatic packaging line, designed for filling and packaging solid and liquid products in PET containers, integrating different dosing and handling operations within a single industrial facility. The line combines a multi-head weighing and dosing system for solid products with stations for incorporating liquid components, enabling formulations in which the container contains a solid part and a covering liquid, sauce, brine, or other liquid component, depending on the installed configuration. Its construction, primarily in stainless steel, elevated platform, automatic transport systems, and safety enclosures, provides a complete solution for professional food packaging lines. MAIN FEATURES -Manufacturer: MONDINI -Model: EVOLUZIONE SUPER E380VG -Type: Automatic PET packaging line -Application: Solid + liquid products -Automatic container feeding system -Solid product dosing -Integrated multi-head weigher -Weight-controlled dosing -Independent system for liquid incorporation -Automatic container transport -Synchronized positioning at stations -Elevated platform for dosing equipment -Structure and processing areas mainly in stainless steel -Safety enclosures and protections Gusdpfx Akewny Rxj Ujg -Continuous industrial operation -Integrable with inspection and end-of-line equipment PROCESS PET containers are automatically fed into the line and transported to the various processing stations. The solid product is fed to the multi-head weigher, where it is divided into different portions, and the appropriate combination is selected to achieve the target weight. Subsequently, the dose is discharged into each container. In a later stage, the liquid component can be incorporated, allowing the product to be completed before the final packaging operations. The line can be combined with: PET container feeders Multi-head weighers Liquid dispensers Product feeding systems Sealing/closing equipment Weight controllers Metal detectors Labelers Case packers and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, manufacturers of ready meals, processed vegetables, pickles, and other food companies that need to package combinations of solid and liquid products. Depending on the installed configuration, it can be suitable for vegetables, legumes, olives, pickles, prepared products, and other foods with covering liquids or sauces. The combination of MONDINI EVOLUZIONE SUPER E380VG, multi-head dosing, and filling of solids and liquids provides an automated solution for PET packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW Guodskd Drhepfx Ak Usg 6 pcs manual pressures per 1 area Self weight 1200kg. Very good condition. Available immediately.

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Gjdpfx Akszuzxns Uoug Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Panel dividing and solid wood saw Manufacturer: PANHANS Type: EURO 32 Year of manufacture: 2001 Dimensions: - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Machine attachments: - Roller table at the rear: 3982 mm - Support beam at the rear: 9 pieces, 40 x 4056 mm - Air cushion table at the front: 2 pieces, 600 x 1800 mm, adjustable Air cushion table at the front for miter cutting device: 1 piece, 600 x 1400 mm - Air cushion miter table: 600 x 1800 mm, left - Miter ruler: up to 2060 mm Gusdpozuy Egsfx Ak Ujg - Clamps: 9 pieces, adjustable - Stop jaws: 2 pieces, adjustable - Side pressure: 65-1365 mm, stepless Special accessories: automatic miter cutting device - Special version: hydraulic lifting table with roller conveyor, infeed roller conveyor, 4 length edgers, 4 panel extractors Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2024, MULTIPLE RIP SAW ANGOMAC Gusdpfx Akjh Ia Upj Ujg MAX DEPTH OF CUT 120 MM Max. width of cut 480 mm Max. passage width 600 mm

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood MAWEG ROTOR 6000. Material size 6000 X 900 x 200mm 4 working areas, automatic rotation. Gusdpszraalsfx Ak Uog 12 pcs hydraulic cross pressures per 1 area 12 pcs hydraulic surface pressures per 1 area Self weight 7000kg. Very good condition. Available immediately.