Used Calibration for sale (964)

Condition: new, Promess KA-EMF20/150 Servo Press 20 kN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Condition: New Calibrated: Yes Strain Gauge Amplifier: BA 62601 Financing through our bank is also available. komplett-konzept.leasingo.de Ncsdergn N Sjpfx Ahvep Find more new and used servo presses in our shop! International shipping costs on request!

Condition: repair required (used), Year of construction: 2007, functionality: limited functionality, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, The machine is currently not operational. There are defects in the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Measuring plate: 5,000 x 1,800 mm Calibrated measuring volume Nodpfeytc Dqex Ahvjcp X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Control system: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The HP Z420 measuring PC with Windows 7 can be provided if required. Please note that this PC was infected with a virus as a result of a hacking attack.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Nedsyu If Nopfx Ahvecp MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-M5-22-48408, repeat accuracy: 0.004 mm, number of axes: 7, The new price of the machine in 2023 was €48,700! TECHNICAL DETAILS Number of axes: 7 Arm length: 2.5 m Repeatability: 0.0042 mm Volumetric accuracy: 0.054 mm MACHINE DETAILS Calibration date: 03.2023 Operating temperature range: 10 °C – 40 °C Operating humidity: 95% (non-condensing) Operating voltage: 100 – 240 V AC Frequency: 47/63 Hz Notes: Without CAM2 probe/touch Professional license Nsdpfx Ahjyqwgbevocp Specifications, information, and technical data are provided by the manufacturer; therefore, no guarantee can be given by the seller.

Condition: used, Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 1000033397, Pre-owned Primus 402 Waterjet 5 Axis with one cutting head, has served us for 4 years cutting stone and ceramic benchtops, delivers great cutting capabilities across a wide range of materials, including stone, ceramic, metals, glass, and more. Key Features: - Pioneer Technology: Maximum programming flexibility thanks to the free movement of the cutting head. The 5-axis cutting head is fitted with the patented Intermac infinite rotating C axis system for making top-quality tilted cuts (+/-60°) on complex profiles, with no limits. - Versatile Performance: Primus offers the possibility to process a wide selection of materials such as: natural stone, sintered materials, ceramic, metal, glass, and more. - User-Friendly Interface: Equipped with iCam Software making it easy to program and operate, even for intricate projects. Condition: Ncedpfx Aeytlb Sohvsp - The machine was installed in September 2019 and decommissioned in September 2023. It was running well at the time of decommissioning, with only inaccuracy when cutting circles. Some maintenance may be required to restore it to peak performance, but it remains in good working condition and ready for immediate use in your factory. - The machine’s Probe and Head Rotation Calibration devices may need maintenance or replacement. These features were not critical to our operations and, therefore, were never used. - Decommissioning was carried out by a highly respected and professional Machine Technician in New Zealand, who can also commission the machine installation at your facility. Contact details can be provided upon request. - EXW from Auckland, New Zealand. This is a fantastic opportunity to own a high-performing waterjet at a fraction of the cost of a new model. Contact us today to learn more.

Condition: used, Year of construction: 2017, control MAX5 Distance between centers 588 mm greates pass round over bed 525 mm swing diameter over slide rest 300 mm max. turning diameter 256 mm max. turning length 455 mm max. rod diameter 52 mm x-axis 198 mm z-axis 508 mm spindle tunring speed 4.800 U/min number of tool places 12 Pos. auto power on hours ca. 13.869 h spindle hours ca. 3.935 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nsdpfx Ahsyw Tm Sjvjcp Technical Features & Accessories: - Chip conveyor - Manual tailstock - Tool turret with driven tools - Chip guard enclosure - Parts catcher - Machine-integrated tool calibration - Three-jaw chuck - Coolant and air gun Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Description Wide belt sander Condition: Functionally tested – Working width: 1300 mm – Cross sanding unit with belt blow-off device – Longitudinal sanding unit with infinitely variable speed and belt blow-off device – Calibration roller, activatable via control panel – Vacuum conveyor belt – feed speed infinitely adjustable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC-controlled - EA dust extraction machine: High-pressure blow-off system with rotating nozzles and ionization for removal of statically charged dust Nodjx N A Aaepfx Ahvocp Location: ex client site - Immediately available - Machine must be dismantled by the customer and collected at short notice

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Ncodpfx Ahsu Dahnjvep Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), Year of construction: 2018, General Information • Type: Measuring Center • Manufacturer: Gleason Metrology Systems Corporation, Ohio • Model: GMS • Model designation: 475 • User designation: Gear Analyzer 475GMS • Serial number: 7406 • Year of manufacture: 2018 • Operating hours: unknown • Next calibration: 08/2026 • CE marking: available • Including PC with control unit • Documentation with operating manual available Machine Description • Gleason Gear Analyzer Measuring Center Model 475GMS • Measuring center for the complete measurement of all types of gears • Suitable for the measurement of gear cutting tools • Suitable for the measurement of prismatic workpieces • Integrated surface roughness measurement • Currently used for testing manufactured components for precision gearboxes Machine Specifications Workpiece Capacity • Workpiece diameter: max. 475 mm • Workpiece weight: max. 300 kg Power Supply • Power consumption: 20 A • Operating voltage: 230 V AC / 50 Hz Ncjdeywyvtopfx Ahvep Machine Dimensions • Dimensions: approx. 2,130 x 1,640 x 1,130 mm (H x W x D) Machine Weight • Weight: approx. 3,500 kg net Special Features • Loader unit mounted in front of the measuring center • Loader unit retrofitted in February 2022

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm Ncjdpfoiwa Iaex Ahvsp - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. Nsdpfev Ab Dqex Ahvecp The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) Ncsdpfjyv N E Uex Ahvop - Calibration

Condition: new, working length 2050 mm 2.0 mm max. wire thickness 3.0 mm Underfloor 110 mm motor strength 165 mm motor strength 22 kW bending speed 5.2 mm/min length 3150 mm Nsdeyv N Dwjpfx Ahvecp height 1150 mm width 850 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration Ncjdpfx Ahoyv Nh Nsvop

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm Ncsdeyv Nf Uepfx Ahvsp side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel Nsdpfeyv I Ubex Ahvecp - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel Ncsdpfx Ahsyv I Smsvjp - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: refurbished (used), Year of construction: 2016, CLIPPER POLY CLIP FCA 80 2016 year After capital renovation 3 months warranty for parts. For the 38 mm to 160 mm calibre range. All bearings, bushings and rollers new. New funnel with brake. Delivery time: 3 weeks. 15% prepayment. Nedpfx Ahovbfiujvocp

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 400 mm y-travel 580 mm z-travel 460 mm Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110°; C-Axis 360° Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed ??20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Loading door and air supply at the worktable Pallet management via machine control Including UPC-P chuck Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Nedpfx Asyv Ap Hehvocp Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: used, mileage: 186,000 km, power: 265 kW (360.30 HP), first registration: 11/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 6,310 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained and affordably priced vehicle with fully documented service history from us! Electric-hydraulic Wingliner body Special equipment: - Axle load measuring system - Front axle load: 8.0 t - Two-line trailer brake system - Connectors on the left - Trailer hitch: Ringfeder towing hitch - Audio system: CD radio (Bluetooth) - Exhaust outlet right underside - Compressed air connection in driver’s cab - Air horn - Driver assistance system: Attention-Assist (drowsiness detection sensor) - Cab: steel-sprung, comfort - Cab floor with 170 mm engine tunnel - 3-piece fenders - Cool box / refrigerator - Air intake behind cab - Enhanced engine brake - Lateral spare wheel hoist - Rotating beacons left/right - Acoustic reverse warning (external alarm signal) - Tail lift control switch - Fleet management system interface - Driver’s seat: comfort suspension seat - External sun visor - Side window sunblind on driver’s door - Additional 24V socket in passenger footwell - Cab door extension Additional specifications: - Emission standard EURO 6 - Axle configuration: 4x2 Njdpfx Ahoxmp Sajvjcp - 24V / 15-pin trailer socket - Antos - Exterior mirrors electrically adjustable and heated - 170 Ah battery - Rear axle differential lock - Steel air tank - Medium air unit - Driver assistance: Active Brake Assist - Driver assistance: Lane Keeping Assist - Cab width: 2.30 m - Cab: hydraulic tilt mechanism - Cab: M ClassicSpace - Cab: reinforced (Sweden package) - Suspension: leaf/air - Front springs: 7.5 t, 2-leaf - Electric window lifters - Tinted windscreen - 100 A alternator - 12-speed gearbox - Type: G 211-12 - Urea (AdBlue) tank: 60 liters - Manual lifting roof (steel) - Rear axle crown wheel 440 - 10.4 cm info display - Body/construction: chassis - Central locking system - Fuel tank: 290 l aluminum - Unregulated steering pump - Engine: 10.7 l – 265 kW R6 diesel (OM 470) - Engine compartment encapsulation - Wheelbase: 4,900 mm - Ramp mirror - Spare wheel - Residual heat utilization - Disc brakes, front and rear axles - Seat upholstery: fabric - Passenger functional seat in cab - Front splash guards - Front axle stabilizer - 24V socket in driver’s cab - Tachograph / EU control unit - Aerodynamically shaped underbody panel - Front underrun protection - Toll pre-installation - Dropped front axle - Regulated water pump - Permissible GVW: 18.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we are happy to offer you a LEASE-PURCHASE or FINANCING PACKAGE. SERVICE TÜV (MOT) / UVV LBW / LGS inspection / tachograph calibration / OBU device installation and service carried out by our AUTHORIZED SERVICE CENTER on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale according to our terms and conditions. Information provided online is non-binding and does not constitute guaranteed specifications. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 186,000 km, power: 265 kW (360.30 HP), first registration: 11/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 6,310 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained and affordably priced vehicle with fully documented service history from us! Electric-hydraulic Wingliner body Special equipment: - Axle load measuring system - Front axle load: 8.0 t - Two-line trailer brake system - Connectors on the left - Trailer hitch: Ringfeder towing hitch - Audio system: CD radio (Bluetooth) - Exhaust outlet right underside - Compressed air connection in driver’s cab - Air horn - Driver assistance system: Attention-Assist (drowsiness detection sensor) - Cab: steel-sprung, comfort - Cab floor with 170 mm engine tunnel - 3-piece fenders - Cool box / refrigerator - Air intake behind cab - Enhanced engine brake - Lateral spare wheel hoist - Rotating beacons left/right - Acoustic reverse warning (external alarm signal) - Tail lift control switch - Fleet management system interface - Driver’s seat: comfort suspension seat - External sun visor - Side window sunblind on driver’s door - Additional 24V socket in passenger footwell - Cab door extension Additional specifications: - Emission standard EURO 6 - Axle configuration: 4x2 - 24V / 15-pin trailer socket - Antos - Exterior mirrors electrically adjustable and heated - 170 Ah battery - Rear axle differential lock - Steel air tank - Medium air unit - Driver assistance: Active Brake Assist - Driver assistance: Lane Keeping Assist - Cab width: 2.30 m - Cab: hydraulic tilt mechanism Ncodpfx Ajx U Nv Dehvjp - Cab: M ClassicSpace - Cab: reinforced (Sweden package) - Suspension: leaf/air - Front springs: 7.5 t, 2-leaf - Electric window lifters - Tinted windscreen - 100 A alternator - 12-speed gearbox - Type: G 211-12 - Urea (AdBlue) tank: 60 liters - Manual lifting roof (steel) - Rear axle crown wheel 440 - 10.4 cm info display - Body/construction: chassis - Central locking system - Fuel tank: 290 l aluminum - Unregulated steering pump - Engine: 10.7 l – 265 kW R6 diesel (OM 470) - Engine compartment encapsulation - Wheelbase: 4,900 mm - Ramp mirror - Spare wheel - Residual heat utilization - Disc brakes, front and rear axles - Seat upholstery: fabric - Passenger functional seat in cab - Front splash guards - Front axle stabilizer - 24V socket in driver’s cab - Tachograph / EU control unit - Aerodynamically shaped underbody panel - Front underrun protection - Toll pre-installation - Dropped front axle - Regulated water pump - Permissible GVW: 18.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we are happy to offer you a LEASE-PURCHASE or FINANCING PACKAGE. SERVICE TÜV (MOT) / UVV LBW / LGS inspection / tachograph calibration / OBU device installation and service carried out by our AUTHORIZED SERVICE CENTER on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale according to our terms and conditions. Information provided online is non-binding and does not constitute guaranteed specifications. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts Ncjdpfx Aexmiirohvop b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° Nedpoyw Tddofx Ahvecp C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Ncedpovpdhxjfx Ahvop Leasing possible. (All prices are NET)

Condition: ready for operation (used), Year of construction: 2020, total height: 1,529 mm, total width: 776 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, overall weight: 324 kg, number of axes: 3, This 3-axis Mitutoyo QV-L404Z1L-D was manufactured in 2020. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 200 mm. The machine is equipped with advanced measurement capabilities, including video and touch probe measurement methods. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo QV-L404Z1L-D CMM machine we have for sale. Contact us for further details. • Last calibration: 06 September 2022 • X-axis travel: 400 mm • Y-axis travel: 400 mm • Z-axis travel: 200 mm • Resolution: 0.1 µm (0.0001 mm) • Length measurement accuracy XY: (2 + 3L/1000) µm • Length measurement accuracy Z: (3 + 5L/1000) µm • Length measurement accuracy E2XY: (2.5 + 4L/1000) µm • Machine depth: 1303 mm • CNC control: Yes • Control software: QVPak V13.3 • Operating system: Windows 10 64-bit • Measurement display: 3D graphical measurement display • Programming interface: EasyEditor • Edge detection: Advanced recognition algorithms • Camera type: High-resolution CMOS color camera • Communication: USB 3.0 • Zoom system: 7-step zoom lens Ncsdjyvqqfspfx Ahvep • Measurement methods: Video measurement; Touch probe measurement; Multi-sensor measurement; Automatic measurement sequences • Measurement capability: Micro and nano feature measurement Additional equipment • Touch probe type: TP20 • Probe modules: 2 standard force modules • Probe module type: TP20 standard force • Stylus holder: 5-way holder • Stylus length: 13 mm • Stylus diameter: 10 mm • Probe changer: MCR20 • Probe changer capacity: 3 ports • Calibration ring: Ø20 mm • Reference sphere: Ceramic master ball Ø15 mm • Machine stand: QVST-4L • Power cable: CH type 1.8 m • Computer type: Dell Precision workstation • Processor: Intel Xeon W-2223 3.6 GHz • Monitors: 2× Dell UltraSharp U2421E • Additional software: QV Partner Manager V3.1 • Statistical software: MeasLink Real-Time Professional V9