Used Calibration for sale (958)

Condition: excellent (used), Year of construction: 1998, Fritsch Cutting Table, Confectionery Line - Model FT 450-L Nwedpfxjyucy Ij Ahvod - Year of manufacture: 1998 - Length: 4.5 m - Electronic control - 2 cutting rollers - Calibrator/option - Technical condition: very good - Collection from warehouse/shipping option - Price on request

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Nwodpfxot Tqy Ej Ahvod Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) Nwsdpfx Aoyquzcehvjd II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Basic data: Year of manufacture: 2019 Weight: 6021 kg Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Nedpfov Iq Tljx Ahvowd

Condition: used, empty load weight: 8,905 kg, maximum load weight: 30,095 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2015, next inspection (TÜV): 12/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2015, Equipment: ABS, Tare weight: 8905kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Pallet box (double): New., Electronic Brake System EBS, Spare wheel carrier double, Ferry lashings, 1x15 and 2x7 pin plug, Antispray, Fresh paint all over the place. Ali chequer to compliment the rear end. Engine just serviced inc. Calibration F Gas. Solid interior door. 1/2 width rear evap. 2 rows of recessed loadlock., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Njdpfx Aheyht Hljvswd

Condition: used, Working width ca. 1.300 mm mm Nwsdpfxsypware Ahved Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only served as a showroom model and is therefore as good as new. You are always welcome to visit our showroom in Bergeijk for a viewing. 2023 Deburring and finishing machine F200 XL with vacuum support. Suitable for deburring, edge rounding, and/or grinding steel sheet parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products ranging in size from a one-euro coin up to 200 mm wide can be processed on this powerful compact unit. Burrs and imperfections are removed at the infeed side by a grinding unit, resulting in a smooth, burr-free surface. This is followed by two oscillating combination brushes applying light pressure. The brushes ensure uniform edge rounding of all sides and holes, both around and within the flat-ground product, leading to optimal finishing quality. The F200 XL offers features such as automatic brush calibration to guarantee consistent precision, full ERP control, and seamless integration into automated production environments. In short, it is a finishing machine fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction unit and accompanying ductwork. Only available while stocks last. The machine is supplied with one year warranty excluding wear parts. Delivery ex-works Bergeijk. If required, we can also supply the machine including transport, installation, and operator training at your location. Nwedpeyt I U Usfx Ahvjd The machine can be viewed in our showroom in the Netherlands. Contact us and we will send you an attractive offer.

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: Njdpoyt Ikvefx Ahvowd • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system Nwodeyt H Dnspfx Ahvod

Condition: good (used), Year of construction: 2012, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, overall weight: 579 kg, Immediately available. Nationwide delivery (Germany) within a maximum of 7 days after order. Nwedpfx Aew Hqx Rshvsd General machine data: Machine type: Quick Vision APEX QV-T1404 Year of manufacture: Mid 2012 Manufacturer: Mitutoyo Measuring range: 400 x 400 x 250 mm Control: Mitutoyo QV Remote Box Operating manual: Available Hardware and software equipment: PC/CPU: Brand new Monitor: Brand new Software: Mitutoyo QVPAK V13.2 Probe holder: Renishaw PH-6 with PI200-3 Probe: Renishaw TP200 Power supply: Mitutoyo Power Supply Unit 600 Additional accessories: Objectives - 02AKT250 1x & 02AKT300 2.5x This Mitutoyo Quick Vision Apex CNC from mid-2012 is designed for versatile measurement applications. Equipped with modern hardware and the latest Mitutoyo software, it offers high precision and reliability. The comprehensive range of accessories, including the Renishaw probe and calibration sphere, enables diverse measurement tasks. Kneissl Messtechnik GmbH is a trusted partner of Mitutoyo. Thanks to our close cooperation, we can respond individually to customer requirements and make specific adaptations to the Mitutoyo Quick Vision Apex.

Condition: used, mileage: 169,000 km, power: 235 kW (319.51 HP), first registration: 07/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a quality and competitively priced vehicle with a fully documented service history from us! NEXT GENERATION / NEW MODEL / TOP CONDITION!!!!! STEERED AXLE Ewers swing-wall body with 4-row rear load securing system AIR CONDITIONING NAVIGATION SYSTEM TAIL LIFT 2,000 KG 2 x TRAILER COUPLING GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We organize your registration and export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we are happy to provide you with a LEASING, HIRE PURCHASE, or FINANCING OFFER. SERVICE TÜV (general inspection) / UVV tail lift test / LGS inspection / tachograph calibration / installation of OBU unit and service by our AUTHORIZED WORKSHOP on site. TOLL / ROAD CHARGES Nwjdjw Anubspfx Ahvsd Toll registration can be arranged on-site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our terms and conditions. The information on the internet is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 71,000 km, power: 355 kW (482.67 HP), first registration: 08/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, DAF XF480 FT Low Deck Volume Tractor Unit ---- Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ---- Used Vehicle Long Combination Vehicle (LCV) - Long HGV First Registration: 21.08.2024 Technical Inspection (TÜV): 08/2026 Safety Inspection (SP): 02/2027 Warranty: Plus: 3 years drivetrain – up to 500,000 km Financing: We are happy to arrange a competitive finance offer for you, subject to credit approval. Equipment: • Climate Package • Sleeper High Cab • Additional cab insulation • Roof spoiler • Side fenders • LED skylights • LED headlights and fog lights • Windshield with solar protection film • Roof hatch with electric operation • DAF Corner View • Dashboard design: Plateau • Driver’s seat: Luxury Air suspension • Passenger seat: Cinema style with fabric upholstery • Curtains with separating curtain • Luggage compartment • Lower bunk with XtraComfort mattress Njdpjytzt Rsfx Ahvswd • Refrigerator • Automatic climate control • Integrated stationary air conditioning system • DAF Infotainment Luxury Plus • DAF Connect • Turn assist • Adaptive cruise control with FCW and AEBS-3 • ECAS remote control with extended functions • Engine: MX-13, 355 kW / 483 hp – EURO 6 • ECO Performance • Automated 12-speed TraXon transmission • MX engine brake • Full air suspension: 8.0 + 13.0 t • Axle load monitoring • Wheelbase: 3.80 m • Tires: Goodyear – Front: 315/60R22.5 – Rear: 295/60R22.5 • Rear axle ratio: 2.05 • Mechanical differential lock • Aluminum fuel tanks: 690 + 525 liters • Fifth wheel: SAF S36-20, 150+12 mm • Fifth wheel setting: 770 mm • Chassis guard • Power supply connection • Analog-controlled PTO prewiring (cable harness prepped) • Alternator: 130A, Batteries: 2 x 210Ah AGM • Battery energy monitoring • Dust guard Optional: • Fire extinguisher boxes • OBU installation • Tachograph calibration • CB radio • Power inverter ---- Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg Authorized DAF Dealer – DAF Service Partner – FIAT Professional Service Partner Errors and interim sale excepted Sale to business customers only.

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers Nodpfxox Ifgrs Ahvowd - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES Nwsdpfx Ahjx Dbh Ioved – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Nwedpfx Aeyaq Rfehvsd Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly checked, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 7106 Year of manufacture: 2004 Njdpfx Ahoyg Nl Ujvowd Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, MCOSMOS 4.0, calibration sphere We are happy to provide tailored advice as specialists to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. Nwsdpfx Aheyg Iryeved General machine data: Machine type: Crysta Apex 9106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consulting as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta C Apex 9208 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 2000 x 800 mm Accessories: Nedpfsyg Iy Djx Ahvowd Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consultation as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,000 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta C Apex 123010 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 1200 x 3000 x 1000 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 2000 Additional accessories: Calibration sphere (ceramic), Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer you expert advice as specialists to help you find the right machine for your measurement task. Worldwide delivery available on request! Nwedpfxsyg I Alj Ahvjd

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl Messtechnik. With KNEISSL-Approved, you receive a used machine that has been checked, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta Apex 9166 Year of manufacture: 2005 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 600 mm Njdpfx Ahjyg Iubevswd Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer individual advice as specialists to help you find the right machine for your measurement application. Worldwide delivery available on request!

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Nwodsytrufspfx Ahvjd Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edgebanding: between 8 and 60 mm, Njdpfx Ahjytp Hrevowd Edge thickness up to 8 mm depending on the unit Configuration: -calibrating, -edge feeding, -glue application, -end trimming, -milling group; flat or profile milling of upper or lower edges, -profile milling unit, -scraping group, -polishing station Pressure beam, feed stop, control panel Year: 2017

Condition: good (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been inspected, tested, and guaranteed to be ready for use from A to Z – quality you can rely on. General Machine Data: Machine type: Global perf. 5.7.5 (PH10) Year of manufacture: 2011 Manufacturer: Hexagon Measuring range: 500 x 700 x 500 mm Nwsdpfx Aheyg I Sgsvjd Accessories: Probe head mount: PH10M probe head Probe: TP200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, B3C-LC controller We are happy to offer you tailored advice as a specialist to help you find the right machine for your measurement tasks. Worldwide shipping available on request!

Year of construction: 2025, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. Nwjdpfoydanhsx Ahvod This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Nwsdpfoydazusx Ahved Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.