Used Cabinet Press for sale (15,601)

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Podex Sr Evopfx Ahvjgi Prior sale is reserved.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT Pgedsxwp Nyjpfx Ahvei In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min Pgjdpfx Asywadwehvsi

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2022, Roll Press Fortuna Automat A 4 E Dough dividing and rounding machine Roll press Fortuna Automat size 4 E with rounding deactivation Head cleaning with electric motor with stainless steel knife Dough input: 1200 to 3600 g, with rounding plate Pjdpfx Ajywadqohvjgi Connection: 400V, 16A-CEE plug Used machine from bakery

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, Roll Divider and Rounding Machine Fortuna Automat A 3 H Dough dividing and rounding machine Roll press Fortuna Automat size 3 Head cleaning to the rear Very robust construction With 3 rounding plates Connection: 400V, 16A-CEE plug Pgodpfxoygdcue Ahvji Dimensions: 720 x 800 x 1510 mm Used machine We have many other roll presses in stock!

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, 85 t x 2500 mm Pgsdpfxsyxri Is Ahvei Weight: 9000 kg (without tools) Between columns: 2050 mm Service: In 10/2023, the pump was replaced by TRUMPF at a cost of EUR 10,000. Since then, the machine has operated approximately 200 machine hours.

Condition: reconditioned (used), functionality: fully functional, total height: 1,520 mm, year of last overhaul: 2026, DGUV certified until: 04/2027, warranty duration: 6 months, total width: 600 mm, total length: 700 mm, input voltage: 400 V, Gostol roll press semi-automatic 4-14 Proven, advanced technology – tried and tested many times! Blades made of stainless steel with 3 pressure plates robust construction 14-piece division DGUV V3 safety tested exclusively with us Connection: 400V, 16A CEE plug Dimensions: 600 x 700 x 1520/2200 mm (WxDxH) New machine & SAB certified Pjdpfx Aoyagtiohvsgi guarantee and spare parts service included Other top dough dividers in stock!

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: CNC control, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Xact Smart 225/4100 Pjdpeyxqzvofx Ahvegi Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Cnc control: ByVision touch screen

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, year of last overhaul: 2026, Dough dividing and rounding machine Bread roll press TOP model Fortuna Automat Gr. 3+ Head cleaning backwards electrically Dividing head with new stainless steel knife Robust technology Dough divider with 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (WxDxH) Refurbished used machine with warranty & spare parts service Option: Platform or chassis Rounding plates Service package Maintenance contract Delivery service Spare parts box Training & commissioning Pgedpfow H H N Sex Ahvoi

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, total width: 600 mm, total length: 700 mm, total height: 1,520 mm, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 1 kW (1.36 HP), type of input current: three-phase, DGUV certified until: 04/2028, overall weight: 375 kg, NEW NEW Roll Divider and Rounder NEW NEW Semi-automatic dough dividing and rounding machine, Model: 4-14 NEW Proven technology ... the original! Knife with easy cleaning position! Comes with 3 rounding plates Dough ring coated with easy click Dividing range: 130 to 250 grams/piece 14-piece division Mobile machine Only from us: DGUV V3 tested Connection: 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) NEW machine & SAB tested Pgjdpfou Eaudjx Ahvoi With warranty + spare parts service Options: Leasing & rental service Rounding plates Maintenance contract Service package Instruction & commissioning Loan machine service Many more roll dividers in stock!

Condition: used, Year of construction: 2014, functionality: fully functional, temperature: 150 °C, pressing force: 962 t, input frequency: 50 Hz, opening width: 200 mm, operating temperature: 135 °C, input voltage: 400 V, operating pressure: 290 bar, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, pressure: 25 bar, stroke length: 200 mm, working width: 1,400 mm, workpiece height (max.): 200 mm, plate width: 1,400 mm, table width: 1,400 mm, table length: 2,750 mm, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Pgjdpoyxp Twofx Ahvji Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: good (used), Year of construction: 1984, functionality: fully functional, pressing force: 43 t, bale width: 800 mm, bale height: 800 mm, bale weight: 250 kg, power: 18.5 kW (25.15 HP), The machine is available immediately and has been in storage for a few weeks. It was fully operational prior to storage. The machine is equipped with 4 horizontal binding wires. Pjdjyxp Etepfx Ahvsgi

Condition: like new (used), Year of construction: 2014, 4 meter width Pgsdpfslqwvkox Ahvji Nominal pressure 1250 kN CNC Back Gauge Quick Change Tooling

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Pedpjyxnzyofx Ahvegi Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,000 × 2,000 mm Table, 1,000 mm Clear Height The machine shown here was built and delivered as a custom order. We can manufacture this machine for you on short notice – taking individual options into account. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and processing of large-format components. Base price: €102,000 net Optional Equipment (on request): The listed options are based on realized customer projects and allow precise adaptation of the machine to your specific application. The base machine is a functional standard version, which in practice is usually enhanced with additional features and project-specific configurations. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 controller with 7" touch panel - Radio remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various versions) ==== Technical Data & Information: ==== General Specifications Type: Portal Press Pressing force: 300 t (adjustable) Total weight: approx. 8,500 kg Overall dimensions (W × D × H): 3,285 × 3,020 × 3,500 mm ==== Working Area Table size: 3,000 × 2,000 mm Clear height: 1,000 mm Frame gap: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder movement: ±900 mm Portal longitudinal travel: 2,500 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: lever control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW Pgedpfeyxnw Uox Ahvei ==== Features - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-component coating (RAL colors selectable) ===== For straightening steel structures, vehicle manufacturing, maintenance, assembly work, special constructions Portal press, straightening press, hydraulic press, 300 ton press, industrial press, metalworking Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: excellent (used), functionality: fully functional, Drawing cabinet / map cabinet, six drawers, 1,350 x 930 x 980 Pgjdpfx Asyxnrxohvsi

Condition: used, Year of construction: 1999, Manufacturer: Ebu Model: STA 100/1000 P2 Serial number: 54203/05G Year of manufacture: 1999 Pressing force: 1,000 kN Stroke adjustment: 8 - 140 mm Ram strokes: 50 - 180 strokes/min Location: 41751 Viersen Condition: Used, for parts/spares You are welcome to send us your price offer. Pjdpox Ea Shjfx Ahvegi Reasonable counteroffers will be considered. When making an inquiry, please include your full contact details! Additional photos available upon request. You are also welcome to inspect the item on site. Simply call us to arrange an appointment. The item comes from insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. Sale is without any guarantee. Liability, reduction, or cancellation are expressly excluded. A prior inspection is recommended, as the item is sold as seen. All information and contents are provided without guarantee. Subject to errors and changes. The object will be sold as viewed on site, in used condition, with retention of title, and excluding any warranty for visible or hidden defects, particularly those of technical, quality, performance, or usability nature. Due to time constraints, we will only respond to serious inquiries and price offers! This is an advertisement for information purposes only. Viewing by appointment only! Kind regards

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turner * 2 tables with automatic Vario-Pin system Pgjdjxbcudopfx Ahvoi * Teflon coating for pre-glued foil * Foil laying system for pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Max. workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil storage carousel, 3.2 m height with 14 hanging bars * PLC control: Siemens S7 * Control panel for Siemens TP 270 PLC (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Max. chamber pressure: 6 bar * Max. pressing opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40/60 mm * Max. pressing force: 2400 kN * Operating pressure of hydraulic system: 320 bar

Condition: used, Workshop Drawer cabinet PAROLAI 11 drawers: 3 drawers height 40 mm 6 drawers height 60 mm 1 drawers height 150 mm Pgsdoyxm S Dspfx Ahvsi 1 drawers height 90 mm Dimensions (L x W x H): 910 x 720 x 1110 mm Weight: approx 150 KG

Condition: used, Workshop Drawer cabinet 7 drawers LISTA 7 drawers: 2 drawers 600 x 600 mm x height 50 mm Psdpfeyxm Sdox Ahvogi 1 drawer 600 x 600 mm x height 70 mm 3 drawers 600 x 600 mm x height 120 mm 1 drawer 600 x 600 mm x height 170 mm Length: 715 mm Depth: 720 mm Height1000 mm Weight: approx 100 KG

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 150 kg, Die Schneckenpresse WT-85 ist für die Herstellung von Öl im Kaltpressverfahren bestimmt. Der Pressvorgang mit dieser Maschine ist die natürlichste Methode zur Ölgewinnung aus Saatgut – rein mechanisch, bei niedriger Temperatur und ohne den Einsatz chemischer Extractionhilfen. Die Presse ermöglicht eine Leistung von ca. 30 litrów za Stunde. Geeignete Rohstoffe sind unter anderem: Raps, Mariendistelsamen, Leinsamen, Sonnenblumenkerne i viele weitere Ölsaaten. Bei anderen Saaten bieten wir kostenlose Testpressungen w unserem Showroom an. Ein wesentlicher Vorteil von kaltgepressten Ölen ist ihr Gehalt an ungesättigten Fettsäuren, insbesondere an Omega-6- i Omega-3-Fettsäuren. Diese essenziellen Fettsäuren müssen über die Nahrung aufgenommen werden, da der menschliche Körper sie nicht selbst produzieren kann. Dane techniczne: • Länge: 655 mm • Breite: 671 mm • Höhe: 620 mm • Gewicht: 150 kg • Typ produktu: Schneckenpresse zur Ölgewinnung • Verwendung: Zur Ölpressung • Antrieb: Elektrisch • Leistung: bis zu 30 l/h • Motorleistung: 4 kW • Rozpiętość: 400 V Zusätzliche Informationen: • Europäisches Produkt Pgodpfx Ahowh Ra Rsvsi • Garantie und Ersatzteile verfügbar • Verkauf net with USt-ID-Nummer • Abholung vor Ort oder Versand nach Absprache • Besichtigung und Test vor dem Kauf möglich • Wir beraten Aug gerne bei der Auswahl der passenden Ausrüstung für Ihre Anforderungen Itwowh Ra Rov Rtz Ijg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 385 kg, Die Schneckenpresse WT-150 ist für die Herstellung von Öl im Kaltpressverfahren bestimmt. Diese Maschine ermöglicht eine Leistung von ca. 120-150 kg dla Stunde. Als Rohstoffe eignen sich: Raps, Mariendistelsamen, Leinsamen, Sonnenblumenkerne i viele weitere Ölpflanzen. Bei anderen Saatarten ist ein Test erforderlich – diesen fuhren wir gerne kostenlos in unserem Showroom durch! Dane techniczne: • Długość: 1460 mm Pgedjwh Rfyjpfx Ahvei • Breite: 605 mm • Höhe: 1240 mm • Gewicht: 385 kg • Typ produktu: Schneckenpresse zur Ölgewinnung • Anwendung: Zur Ölpressung Kowv Rtzswh Rfys Islt • Antrieb: Elektrisch • Leistung: bis zu 120–150 kg/h • Motorleistung: 7,5 kW • Spannung: 230V / 400V

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, working width: 1,200 mm, Uteco Platinum 808 stack flexo printer 8 colors: 4+4 Material width max. 1250mm Printing width max. 1200mm Print repeat min/max 300/1200mm Pgodpfoyxm Ifjx Ahvoi Includes 82 printing cylinders

Condition: good (used), SIMIPIANTI COLD PRESS WITH MOVABLE UPPER PLATENS LOWER PLATEN: DIMENSIONS 1800x1215mm With rollers in the platen for panel conveying UPPER PLATEN IN 2 SECTIONS: 1800x600mm OPENING BETWEEN THE 2 PLATENS: 650mm Pjdpfxoyk Hzuj Ahvsgi

Condition: new, pressing force: 3 t, Force 32 kN, stroke 100 mm Pedpjyxmppefx Ahvogi