Used Cabinet Cts for sale (3,860)

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Dujdpfx Adeygultjasr Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Duodpfxoya Ev Ns Adasr Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Dsdpfx Adswfdnijaour Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Djdpfx Adjup T Uqeasur Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Dodpfx Aoxb Dm Isdaour Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone.

Condition: excellent (used), CTS test cabinet climatic chamber Here we offer a CTS climatic chamber. Air cooled Test chamber volume: 200 liters Dodehwhzwspfx Adasur Test chamber dimensions: Height 750, width 650, depth 400 mm External dimensions: Height 1800, width 920, depth 1345 mm Temperature working range temperature range: -40°C / +180°C cooling speed: 4 K / min heating speed: 4 K / min Max. heat radiation at +20°C: 3500 W Temperature constancy, temporal: ≤± 0.3 K. Climate working range Temperature range: +10°C to +95°C. Humidity range: +10%to +98% r.H. Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current 9.4 A Rated power 4,8 kw Weight: approx. 450 kg Refrigerant R404A Type: CTS C-40/200 The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Dsdpfx Adevba Raoaour Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled Dedpfxerivfce Adajur The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Dedpfou U Ixmsx Adaeur Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Temperature range: -40 °C / +180 °C Humidity range Duedju Hlb Eepfx Adasr 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS climate chamber climate test cell Here we offer a CTS climate chamber climate test cell. Dujdpeip Dp Sefx Adaer Available from mid-January 2023! Water cooled Height adjustable! Footprint approx. (W x D x H): 3755x 3470x 2480 Test area approx. (W x D x H): 2500x 2720x 2200 Test space volume: approx. 15m³ Temperature range: -40°C to +140°C Temperature deviation 1 K temporally Temperature change speed in the average without heat radiation Measured in the supply air heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10 °C to +90 °C Humidity range . +30 % to +95% r.H. dew point range : +5°C to 89°C temperature deviation 0,5 K temporal Humidity deviation ±1- ±3% r.H. temporal nominal voltage: 400V 3/N, PE, 50 Hz rated power: 53,5 KW Rated current: 92,3 A Compressor: S6J-16.2 + chiller Refrigerant: R404A Weight 5500 kg Type: CW-40/16 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Dsdpevitmdjfx Adaeur Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Dodpfxjw U Awme Adaour Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate Dodpfx Aexdi Ezodajur 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Dedpovcyawofx Adaeur Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C Dedpjihb Amefx Adaour approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Dujdpfjhvmkiox Adaor Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm Dusdpfsb A Iukjx Adaer -Drawer heights: 260 mm -Weight: 216 kg

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features Dusdpfx Adsxhfr Esaor HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: used, Complete LOADING, CUTTING & DEBURRING LINE & UNLOADING, manufactured by RALC CTS CONNI OPTIONAL : AUTOMATIC ROBOTIC BUNDLING SYSTEM in squares/hexagonal bundles, with exit carriage and safety areas Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140mm - Bundle loader: 6,000mm - 12,300mm x 5Tn - Unloading: Up to 5,000mm - Optional: Automatic robotic packing system BUNDLE SPECIFICATIONS: Weight at loader: 5000 Kg Diameter max.: 600 mm Min. – max. tube length at entry: 6000 – 12300 mm Max. bending of the tubes at entry: 1.5 mm/m CUTTING Possible diameters with loader: - Rounds : 40 – 140 mm - Squares : 40x40 – 135x135 mm - Rectangles : 50x25 – 200x80 mm Max. tube weight: 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350-400-450 mm Disc holding acc. to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Max. tube length at exit: 5000 mm DEBURRING Deburring unit Dimensions: - Rounds diameter: 20 – 102 mm - Squares: 30x30 – 70x70 mm - Rectangles: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz MITRE CUTTING With manual loading, it is also possible to make MITRE CUTTING Cutting Capacity (without loader) Round tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Squares: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangles: - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm SCOPE OF SUPPLY 1. Loader Mod. CM5FT12 for 5000 kg bundle from 5000 to 12300 mm length 2. Cutting unit Mod. LYBRA C450 with: - Micro-lubrication - Air blowing - Chips conveyor - Tilting carriage - Unloading clamp 3. Deburring unit Mod. SDB100 5000 4. Exit collecting cradle with endless slings 5. Complete electrics & hydraulics 6. Existing documentation * 7. Existing spares * *To be checked before order OPTION : Front collecting automatic portal with robot, capable of packing round, square, or rectangular tubes in hexagonal or square bundles Cutting range: 40 - 140 mm Bundle loader: 6.000 mm - 12.300 mm x 5 Tn Unloading: Up to 5.000 mm Optional: Automatic robotic packing system Bundle weight at loader: 5000 Kg Bundle diameter max.: 600 mm Tube length at entry: 6.000 – 12.300 mm Bending of the tubes at entry: Max. 1.5 mm/m CUTTING Possible diameters with loader, rounds: 40 – 140 mm CUTTING Possible dimensions with loader, squares: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm Dedpovt Tzcjfx Adajur Tube weight: Max. 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350 - 400 - 450 mm Tube length at exit: Max. 5.000 mm DEBURRING Rounds diameter: 20 – 102 mm DEBURRING Squares dimensions: 30x30 – 70x70 mm DEBURRING Rectangles dimensions: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz

Condition: not inspected (used), functionality: unexamined, total length: 1,200 mm, total width: 770 mm, total height: 1,200 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table diameter: 350 mm Table dimensions: 600 x 210 mm Number of T-slots: 4 Table dimensions: 600 x 200 mm Number of T-slots: 4 MACHINE DETAILS Dimensions (L x W x H): 1,200 x 770 x 1,200 mm Weight: 400 kg EQUIPMENT Duodpfx Aoxqm Ersdaor Collets Boring heads Various clamping devices Counter-holder Rotary table Milling tables All accessories suitable for DECKEL tool milling machines

Condition: not inspected (used), functionality: unexamined, total length: 1,370 mm, total width: 750 mm, total height: 1,100 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned off as part of a business liquidation. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! Included: Boring heads Boring tools Collets High-speed milling head Duodpoxqm Dujfx Adaor Counterholder Additional clamping equipment The accessories are suitable for DECKEL tool milling machines. MACHINE DETAILS Dimensions (L x W x H): 1,370 x 750 x 1,100 mm Weight: 300 kg

Condition: not inspected (used), functionality: unexamined, total length: 1,000 mm, total width: 700 mm, total height: 1,100 mm, overall weight: 250 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. Workshop drawer cabinet with the following contents: Grinding wheels in various types & sizes MACHINE DETAILS Dedpfsyr I Tbjx Adajur Dimensions & Weight Dimensions (L x W x H): 1,000 x 700 x 1,100 mm Weight: 250 kg External reference: 55

Condition: not inspected (used), functionality: unexamined, total length: 1,000 mm, total width: 700 mm, total height: 1,100 mm, overall weight: 250 kg, No reserve price – guaranteed sale to the highest bidder! Submitting a bid commits you to collect the item on time between 04.05.26 and 07.05.26. Auction of a workshop drawer cabinet with the following contents: Grinding discs in various sizes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 700 x 1,100 mm Djdpfsyr I Avjx Adaeur Weight: 250 kg Note: The electrolyte cleaning device on top of the cabinet is not included in the scope of delivery. External reference: 54

Condition: not inspected (used), functionality: unexamined, total length: 2,000 mm, total width: 500 mm, total height: 1,950 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Number of cabinets: 2 Shelves per cabinet: 4 Dujdpfx Asyr Ituedajr Dimensions per cabinet: 950 mm x 500 mm x 1,950 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,000 x 500 x 1,950 mm Weight: 300 kg External reference: Lot 17