Used Mazak Hyper Quadrex 150 Msy for sale (348)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm Podewqr Twopfx Aalopl - laser type: CO2

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Pjdpfx Asydc Evoaljpl Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,500 h, functionality: fully functional, turning length: 500 mm, turning diameter: 380 mm, spindle motor power: 26,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, torque: 465 Nm, bar passage: 80 mm, workpiece weight (max.): 400 kg, total height: 1,857 mm, total length: 6,650 mm, total width: 1,845 mm, bar diameter (max.): 80 mm, overall weight: 5,950 kg, Equipment: documentation/manual, Mazak QUICK TURN 250MSY – Complete Package incl. Bar Feeder – As New (Year 2024) Description & Reason for Sale: For sale is a cutting-edge Mazak QT 250MSY (built at the end of 2024) in absolutely full-spec configuration. The machine is optimized for automated complete machining from bar stock and comes with an extensive, high-quality package of tooling and clamping devices. After commissioning, we decided to sell the machine as the control system’s operating concept differs too much from the rest of our machine inventory and does not ideally fit our internal programming workflow. Since we are aiming for a unified operating concept, this powerhouse is now available for immediate sale. The Mazak is currently still integrated into our production. Please note that operating hours may slightly change before the sale date. Inspection under power and in operation is possible on short notice by appointment. Technical Highlights: - Control: MAZATROL SmoothG (19" touchscreen) with Intelligent Safety Shield & collision protection - Working area: Max. turning diameter 380 mm, turning length 500 mm, Y-axis travel 100 mm - Main spindle: 26 kW, max. 4,000 rpm, C-axis (0.0001°), spindle bore 91 mm - Sub spindle: 11 kW, max. 6,000 rpm, for fully automatic rear-side machining - Turret: 12 stations (VDI), all live (5.5 kW, 6,000 rpm) - Dynamics: Rapid traverse X/Y/Z: 30 / 10 / 33 m/min Included Accessories & Automation: - Bar feeder: TOP Automazioni (Magic) short bar loader - Clamping devices: 10” 3-jaw power chuck (main spindle), collet chuck system (main spindle), collets Ø (25, 35, 40, 45, 50, 60, 65, 75, 80) - Various draw tubes and adapters for different diameters (16, 17, 21, 26, 31, 36, 41, 46, 51, 56, 61, 66, 71, 76) - Tool package: Mazak standard holder package - Driven WTO angular head for main and sub spindle - 4-position tool holder, drill holder (main/sub), and 4-position boring bar holder Ppsdpex Tcttsfx Aaljl - Additional options: Tool Eye (automatic tool measuring), parts catcher, 15 bar high-pressure coolant, Mayfran chip conveyor (side discharge), and engraving function Technical Data: - Year of manufacture: End of 2024 - Max. turning diameter: 380 mm - Max. turning length: 500 mm - Spindle bore: 80 mm (bar) - Main spindle power: 26 kW - Torque: 465 Nm - Weight: approx. 5,950 kg - Dimensions: 6650 x 1,845 x 1,857 mm (incl. bar feeder & chip conveyor)

Condition: ready for operation (used), Year of construction: 2012, Main Drive Number of axis 5 This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information. Ppjdsx D I Rpspfx Aalsl Application Types Turning

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Podox Dcbpspfx Aalspl Number of driven tools 12 x Tool Taper Mazak VDI Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 52,298 h, functionality: fully functional, machine/vehicle number: 22/620, spindle speed (max.): 5,000 rpm, travel distance X-axis: 207 mm, bar passage: 65 mm, workpiece diameter (max.): 344 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item by 31/01/2026 at the latest! TECHNICAL DETAILS Maximum swing diameter: 370 mm Maximum machining diameter: 344 mm Maximum bar capacity: 65 mm Axis travel X1 Axis travel: 207 mm X2 Axis travel: 141 mm Y1 Axis travel: 100 mm Y2 Axis travel: 70 mm Z1 Axis travel: 760 mm Z2 Axis travel: 815 mm Podpfxjx Ezvkj Aalepl Main spindle Speed range: 5,000 rpm Main drive power (40% ED / 100%): 22 / 15 kW Spindle bore: 76 mm C-axis resolution: 0.0001 degree Sub spindle Speed range: 5,000 rpm Drive power (25% ED): 22 / 15 kW C-axis resolution: 0.0001 degree Turret Number of stations: 2 x 12 Tool shank height: 25 mm Boring bar holder diameter: 40 mm Driven tools Speed: 6,000 rpm Drive power: 5.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3510 x 2810 x 2480 mm Machine weight: 12,500 kg Operating hours Total operating hours: 69,718 h Automatic cutting hours: 52,298 h Pure cutting Rev. 1: 26,775 h Pure cutting Rev. 2: 15,905 h FEATURES Bar feeder interface LNS Sprint 565 bar feeder Additional coolant nozzles on main and sub spindles Signal lamp (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece unloading device with conveyor belt C-axis sub spindle: 0.0001 degree High-pressure coolant: 70 bar Mayfran Consep 2000 II chip conveyor, ejection to the right

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, bar passage: 77 mm, CNC Lathe with Loading and Unloading Robot and Chip Conveyor! TECHNICAL DETAILS Travel X-axis: 230 mm Travel Y-axis: 100 mm Travel Z-axis: 575 mm Maximum machining diameter: 380 mm Maximum cross slide swing diameter: 675 mm Maximum distance between spindles: 541 mm Maximum bar capacity: 77 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 21 m/min Rapid traverse Z-axis: 33 m/min Main Spindle Speed: 4,000 rpm Motor (100% / 30 min): 22 / 26 kW Spindle bore: 88 mm Sub Spindle Speed: 6,000 rpm Motor (25% duty cycle): 7.5 kW Travel: 585 mm Tool Turret with Live Tools Number of stations: 12 Maximum speed: 4,500 rpm Motor: 5.5 kW Tool shank height: 25 mm Tool shank diameter: 40 mm MACHINE DETAILS Operating hours: approx. 66,000 h DIMENSIONS & WEIGHT Installation area (L x W x H): 285 x 187 x 187 cm Machine weight: 5,400 kg Pjdpfxjxxl S Te Aaljpl EQUIPMENT Mitsubishi RV-12SL-S12 loading and unloading robot Interface for bar feeder Automatic parts catcher Automatic door High-pressure cooling, 5 bar Chip conveyor

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Ppodpfx Asxpugboalol Bar loader Tool presetter device Piece catcher attachment Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Pedpfxehturvo Aalopl Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Condition: good (used), Year of construction: 2010, operating hours: 39,252 h, functionality: fully functional, turning length: 385 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 435 mm, number of slots in tool magazine: 36, TECHNICAL DETAILS Max. machining length: 385 mm X-axis: 370 mm Y-axis: 200 mm Z-axis: 435 mm Rapid traverse speed X-axis: 40,000 mm/min Y-axis: 40,000 mm/min Z-axis: 40,000 mm/min Ppsdjwixguopfx Aalel Main spindle Chuck size: 6" Spindle speed: max. 5,000 rpm Spindle motor (40% duty cycle): 11 kW Spindle motor (continuous runtime): 7.5 kW Milling spindle Spindle speed: max. 12,000 rpm Torque (20% duty cycle): max. 49.1 N m Torque (continuous runtime): 19.6 N m Spindle motor (20% duty cycle): 7.5 kW (10 HP) Spindle motor (continuous runtime): 3 kW (4 HP) B-axis Indexing increment: min. 0.0001° Swivel range: -10° to 190° Tool changer Tool holder: Capto-C6 Tool capacity: 36 Tool diameter: max. 90 mm Tool diameter (with free adjacent positions): max. 125 mm Tool length (from measuring line): max. 210 mm Tool weight: max. 5 kg MACHINE DETAILS Width: 2,320 mm Length: 2,500 mm Height: 2,500 mm Weight: 7,300 kg EQUIPMENT - Automatic tool changer - Robot not included - can be purchased separately - No lower vise

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 385 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 435 mm, number of slots in tool magazine: 36, TECHNICAL DETAILS Max. machining length: 385 mm X-axis: 370 mm Y-axis: 200 mm Z-axis: 435 mm Rapid traverse speed X-axis: 40,000 mm/min Y-axis: 40,000 mm/min Z-axis: 40,000 mm/min Main spindle Chuck size: 6" Spindle speed: max. 5,000 rpm Spindle motor (40% duty cycle): 11 kW Spindle motor (continuous runtime): 7.5 kW Milling spindle Spindle speed: max. 12,000 rpm Torque (20% duty cycle): max. 49.1 N m Torque (continuous runtime): 19.6 N m Spindle motor (20% duty cycle): 7.5 kW (10 HP) Spindle motor (continuous runtime): 3 kW (4 HP) B-axis Indexing increment: min. 0.0001° Swivel range: -10° to 190° Tool changer Tool holder: HSK-A63 Tool capacity: 36 Tool diameter: max. 90 mm Tool diameter (with free adjacent positions): max. 125 mm Tool length (from measuring line): max. 210 mm Ppodpfxswa Tuns Aalol Tool weight: max. 5 kg MACHINE DETAILS Width: 2,320 mm Length: 2,500 mm Height: 2,500 mm Weight: 7,300 kg EQUIPMENT - Automatic tool changer - Robot not included

Condition: ready for operation (used), travel distance Z-axis: 508 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 760 mm, controller manufacturer: Mazatrol M2, total height: 2,990 mm, total length: 3,105 mm, Mazak VQC 30/50B X:1500 - Y:760 - Z:508 mm Table dimensions: 1600 x 800 x 500 mm Max weight on the table: 1500 kg Admission in spindle (ISO): ISO 50 Ppedpoyfitisfx Aalel Power on the spindle: 11 kW Toolchanger: 24 positions Number of rotations: 30 -> 3150 rpm

Condition: used, Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (min.): 3,300 rpm, spindle bore: 104 mm, travel distance X-axis: 870 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,598 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, Equipment: rotational speed infinitely variable, MAZAK CNC Turning Machine MODEL: INTEGREX e-500 HS /U1500 with Mazatrol 640M PRO Control for sale. The machine is in good condition and can be inspected under power on site. The machine maintenance can be documented. In 2025, the X and Y axes were replaced. The milling spindle and gearbox were replaced in 2024. Technical Data - Max. swing diameter: 820 mm - Max. turning diameter: 820 mm - Max. turning length: 1524 mm Main spindle: - Speed range: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Spindle bore: 104 mm - Indexing: 0.0001 Sub spindle: - Speed: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm Ppjdpfxjx Sylds Aalol - Spindle nose: A2-11" - Indexing: 0.0001 Milling spindle: - Drive power: 37 kW - Max. torque: 260 Nm - Speed range: 0-10,000 rpm - Tool holder: SK50 Tool magazine: - Number of tool pockets: 120 Travel: - X: 870 mm - Z: 1598 mm - Z2: 2458 mm - Y: 500 mm - B axis: -30 to 210°, 0.0001° Feed rate: - X/Y/Z: 40 mm/min Machine data: - Connected load: 104 kVA - Operating voltage: 400V / 50 Hz - Required footprint (L x W): 7 x 3.5 m Special accessories: - 120-position tool magazine - High-pressure coolant 70 bar - Renishaw - Laser measurement system for rotating tools - Interface set - Air/water through-spindle cooling - Overload monitoring system - Mayfran Consep 2000 chip conveyor - SMW quick-change chuck

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Max. swing diameter: 750 mm Max. machining diameter: 420 mm Max. machining length: 1,539 mm Max. milling speed: 4,500 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 102 mm Machine equipped with: - CNC CONTROL Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-212, diameter 304 mm - Tool Eye - C-axis - Y-axis - NC tailstock - Hydraulic SMW steady rest - Main spindle with 102 mm bar capacity - Reinforced coolant pump - Chip conveyor, side discharge - 8 fixed tool holders - 2 driven tool holders Ppsdpfx Ajya Du Roalel

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Podoxn Svdopfx Aalopl Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,000 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,585 mm, number of slots in tool magazine: 72, number of axes: 7, This 7-axis Mazak Integrex i-300ST-1500U lathe was manufactured in 2012. It features a main spindle bar passage of 80mm, a tool changer with a capacity of 72 tools, and a milling spindle speed of 12,000 rpm. Additional highlights include a high-pressure cooling system at 14 bar, a chip conveyor, and a mist filter unit. Ideal for prototype production, the machine includes tooling, chucks, and jaws. For more information about this lathe, please reach out to us. Additional equipment • Mist filter unit • High pressure cooling (14 bar) • Work space rinse cleaning (2.7 bar/60 l) Pjdjx U Txiopfx Aalspl • RMP600-Radio/Radio probe • Preparation for 70 bar cooling through spindle • Programmable overload detector • C-axis on second spindle • MO321 - Gear milling without tool • TE810 - Preparation for Multi and Flash tools • NO117 - Tool edge control for 5-axis continuous / Axes movements: X / Y / Z / X2 / Z2 615 / 250 / 1585 / 230 / 1388 mm / W 1539 mm / C-axis indexing 0.0001° Machine Benefits Qualitative Machine Benefits • Comprehensive equipment for diverse machining operations (turning, milling, drilling, threading, etc. ) • Used exclusively with mazak service technicians • Lower turret number of tools 9 Technical Machine Benefits • Main spindle bar passage: 80mm • Milling head (b axis) speed: 12. 000rpm • No123 - tool radius correction for 5-axis continuous control • No137 - eia dynamic compensation i • No092 - synchronous threading for driven tool • Eia/iso continuous 5-axis control • Extensive tool capacity with 72-tool magazine (hsk-63 holders) • Advanced 5-axis continuous control with various compensation and correction features • Max. Machining diameter 658 mm / max. Machining length 1519 mm / max. Workpiece weight 450 (1st spindle) / 400 (2nd spindle) kg • Main spindle motor power 30 (30 min. ) / 22 (continuous) kw / subspindle motor power 26 (30 min. ) / 22 (continuous) kw / Extra Information Machine still under power

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Pjdpfx Asx Ih Dgsalopl

Condition: ready for operation (used), Year of construction: 2020, CNC Lathe – Twin spindle + Robot Equipped with: 12-station automatic Bolt On turret ROBOJOB TA 20/200 robot 1 hydraulic 3-jaw chuck Ø 10 inches on B1 Ppsdpfjx Id A Sjx Aalol 1 hydraulic 3-jaw chuck Ø 6 inches on B2 C-axis 0.0001 Automation package with automatic doors Set of tool holders Chip conveyor Specifications: Max swing: 675 mm Max turning diameter: 380 mm Distance between chucks: 1,000 mm Spindle bore: 80 mm Max spindle speed: 4,000 rpm Main motor power: 26 kW Machine dimensions: 4,500 x 2,300 x H 2,100 mm Robot dimensions: 2,260 x 1,600 x H 2,480 mm Weight: 6,500 kg + Robot 1,250 kg

Condition: excellent (used), Year of construction: 2017, Mazatrol Smooth G Control, Bar capacity 65mm, Ppjdpfjtt Nwiex Aaljl maximum machining diameter 344mm, 2 off 12 Station Turrets, 1325mm between spindles, C axis to both Spindles (0.0001 degree) Y Axis on both Turrets, Spindle Speed 5000rpm, Spindle Motors 22kW, Milling 6000rpm on both Turrets, Swarf conveyor, Tool Setter, Hydrafeed Magazine Barfeed

Condition: used, Year of construction: 1969, functionality: unexamined, For sale is a robust, heavy-duty lathe from Yamazaki / Mazak, model Rex 610 × 1500 (centre distance 1500 mm, swing over bed 610 mm). Ideal for machining large and long workpieces. The machine is in condition commensurate with its age. It has not been tested and is sold as is. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialised in both Mazak machines and other brands. We place great emphasis on personalised support and are happy to assist you at any time even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All details without guarantee. Pjdpfx Aaoxyv Aloljpl

Condition: ready for operation (used), Year of construction: 2002, MAZAK SUPER QUICK TURN 100MSY CNC Lathe - High-Performance Turning with Y-axis (Price Negotiable!) Manufactured in 2002 in Japan by YAMAZAKI MAZAK CORP., this MAZAK SUPER QUICK TURN 100MSY CNC lathe is built for precision machining of workpieces with a maximum diameter of 280 mm. This machine comes with a comprehensive range of features, enhancing its versatility and productivity. All machining parameters are programmed through the advanced CNC control, which allows for the creation of complex programs in just a few steps. The MAZAK SQT 100 MSY CNC turning center weighs 4720 kg. Technical Specifications: ● Maximum turning diameter: 280 mm ● Maximum bar diameter: 51 mm ● Maximum turning length: 309 mm ● Maximum main spindle speed: 6000 rpm ● Dimensions (L x W x H): 2100 x 1600 x 1800 mm ● Machine weight: 4720 kg Equipment: ● CNC Control: MAZATROL 640T Ppedpfxjwpxwms Aalel ● Sub-spindle ● 12-position turret ● Chip conveyor ● Foot control Contact us today to discuss pricing and make an offer!

Condition: used, Year of construction: 2000, operating hours: 42,362 h, functionality: fully functional, machine/vehicle number: 148417, overall weight: 8,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,000 mm, travel distance X-axis: 2,650 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 100 mm, controller manufacturer: Mazatrol, controller model: L-32B, working width: 1,250 mm, workpiece weight (max.): 300 kg, laser hours: 42,362 h, laser power: 1,500 W, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 12 mm, working length: 2,500 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 6 mm, laser type: CO₂ laser, actuation type: electric, Equipment: emergency stop, nozzle changer, Used Turbo X48 champion from 2001 located in Serbia. This laser cutting is equipped with a control unit Mazatrol L-32B and has a working area of 2500 x 1250 mm, laser power 1.5 kW. 42362 total hours on. Cutting capacity: -12mm mild -6mm stainless Ppsdpfsxl Sfyex Aalol -3mm aluminium For additional pictures and videos of laser cutting in action feel free to contact me.

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Ppodexf Iklopfx Aalel

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Psdpfx Ajwngkloalepl Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: excellent (used), Year of construction: 2022, For sale I offer a Mazak QT-COMPACT 300MSY L CNC lathe from 2022. The machine is in perfect technical and visual condition, used occasionally, fully functional, ready to work immediately. Specification: - Year of production: 2022 - Model: Mazak QT-COMPACT 300MSY L - Control: MAZATROL SmoothG - Y axis and main and counter spindle - Spindle passage: 80 mm - Bar passage: 65 mm - Tool turret with Y axis (12 positions) Ppjdpfx Aev T Tiyoalol - Max. turning diameter: 380 mm - Max. turning length: 600 mm - Cooling through the spindle (CTS) - Bar feeder - Well-maintained, used in industrial conditions, regularly serviced. Possibility of issuing a VAT invoice. The machine can be viewed on site by appointment. We help with loading and organizing transport. If you have any questions, please contact us by phone or via OLX message.