Used C60 for sale (322)

Year of construction: 1980, condition: good (used), Offer 15107 Technical data: - Total payload driven + travelling unit 60000 kg. - payload per container unit 30000 kg - workpiece diameter 500 - 4000 mm - Adjustable center distance of the support rollers Dljdpokqxn Dofx Ab Tja - Support rollers made of steel - roller diameter 650 mm - roller width 200 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run - drive 400 V - space requirement attached unit approx. W 5100 x H 1000 x D 1500 mm - space requirement with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight of driven unit approx. 4500 kg - Weight with running unit approx. 3300 kg

Condition: used, Year of construction: 2001, operating hours: 57,430 h, functionality: fully functional, machine/vehicle number: 183899, clamping force: 600 kN, overall weight: 2,330 kg, Arburg injection moulding machine for sale Year of manufacture: 2001 Condition: Very well maintained, regularly and promptly serviced Inspection: Was in operation until recently, currently still connected to power and available for on-site inspection at any time Ready for use: Immediately available and fully functional Dodoxdz I Uepfx Ab Tola The machine is in very good condition and is ready for immediate use. The machine is sold without tooling and conveyor. More details on request.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0-250-15-0310, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, number of slots in tool magazine: 9, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Dlsdpfxoxdw Tgs Ab Toa Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Note: Tools are not included in the sale and delivery scope.

Year of construction: 2008, condition: ready for operation (used), Punching force: 220kN, working range combined operation X/Y: 2585mm/1650mm, working range punching operation: 3085mm/1740mm, working range laser operation X/Y: 3085mm/1650mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 230kg. Positioning speed: 109m/min, max. stroke rate: 900 strokes/min, max. marking rate: 2800 strokes/min, tool positions: 18, accuracy: +/-0.1mm. Machine dimensions X/Y/Z: approx. 8000mm/9000mm/2500mm, weight: approx. 22500kg. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Djdpfx Abjxddagj Tjla

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Dedjw Suwyspfx Ab Tela Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter: 350 mm, spindle bore: 1,050 mm, bar passage: 105 mm, chuck outer diameter: 300 mm, Baruffaldi turret with 8 positions Centre height: 300 mm Centre distance: 3000 mm Bar passage: 105 mm Dledsxcubfopfx Ab Toa Manual chuck 300, bore 105+ Manual chuck 205 Steady rest, faceplate, used VDI toolholders Complete with manuals

Condition: excellent (used), Year of construction: 2008, operating hours: 74,753 h, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 320 mm, displacement volume: 144 cm³, injection pressure: 1,820 bar, injection weight: 132 g, mold height (min.): 200 mm, Arburg 320C-600-250 injection molding machine (241) possibility of working vertically Number: 241 Availability: in stock Year of production: 2008 Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Closing force [kN]: 600 Column spacing [mm]: 320×320 Plate size [mm]: 446 x 446 Min. mold height [mm]: 200 Control type: Selogica Tongue: german Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot socket: Yes Dlodpfow R Tixjx Ab Tsa Core string: 1x

Condition: ready for operation (used), Balluff BIS C-6002-19-…-03-ST11 0733 DE / BIS C-650 evaluation unit, used, normal signs of wear, 100% functional, scope of delivery as per photos Dlodji D T Dyopfx Ab Tsa

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CN6-15000384, We sell a used Mindray Doppler ultrasound, type DC-60, MFG: 05/2021, serial no.: CN6-15000384, weight 85 kg, Device specifications: Color Doppler ultrasound unit with 21.5’’ FULL HD LED monitor i 13.3’’ LED touch screen 4 transducer ports, HDD 320GB, USB ports, DVD-RW Specifications: PW Doppler, Color Doppler, DirPower Doppler, THI, PSHI, iClearTM, iBeamTM, iTouchTM, Echoboost, FCI, HR Flow, iStorage, WiFi, MedSight, MedTouch Optional: CW, 3D/4D, Free Xros, iPageTM, SCV, STIC, CMPR, Color3D, iLiveTM, Stress Echo, TDI... This equipment has 3 transducers: The Mindray SP5-1N Phased Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Form Factor: Phased Array; Applications: Cardiac; Frequency Range: 1.0 - 5.0 MHz; Compatibility: Consona N-Series The Mindray L13-3 Linear Array transducer has a frequency range of 3.0 MHz. - 14.0 MHz. and supports the following applications: Small Parts, Vascular, Musculoskeletal, Pediatrics. Form Factor: Linear Array; Applications: Small Parts, Vascular, Musculoskeletal, Pediatrics; Frequency Range: 3.0 MHz. - 14.0 MHz. Compatibility: Mindray DC-4 The Mindray C5-1s Curved Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Abdominal, Pediatrics, Obstetrics, Gynaecology. Form Factor: Curved Array; Applications: Abdominal, Pediatrics, Obstetrics, Gynaecology; Frequency Range: 1.0 - 5.0 MHz.; Compatibility: Mindray M9 Mindray’s brand-new solution is an excellent fusion of continuous customer insights into clinical needs, combined with continually evolving cutting-edge ultrasound technologies. Full of vitality, with the goal of insight into the future and pursuit of the infinity, it is constantly improving with increased scalability. Dledpsl E H Unsfx Ab Tsa As an all-around partner, DC-60 Exp with X-Insight devotes to provide a comprehensive solution to help you manage all-aspect daily clinical practice with ease and certainty. Based on the deep insights of customer needs, the DC-60 Exp with X-Insight is designed to deliver high efficiency with precision imaging, which is empowered by eXpress Clarity, eXceptional Intelligence and eXceeding Experience. Price: 19.900 Euro + VAT, FCA Bucharest/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: ready for operation (used), A DMG Mori CNC 5-axis milling machine is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 18000rpm, tool holder: SK40, torque: 125Nm, tool positions: 60. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2200mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 59901h, spindle hours: 44715h. Documentation available. An on-site inspection is possible. Dsdpfxexddbdo Ab Tjla

Condition: new, Year of construction: 2025, Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm; suitable film width: 240mm; suitable film: composite film, heat sealable; dosing range: 1-50ml; max. speed of the machine in neutral: 60 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L900xW700xH1850mm; weight: 250kg. Dledpfxsv Nnimo Ab Tja Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2019, operating hours: 34 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber dryers Condition: Ready for use and fully functional Dedpfew Umz Nex Ab Tela Technical condition: good Battery voltage: 24V

Condition: used, Year of construction: 2020, Table model; Calibres up to 90 mm; S-Clip S 625 / 628 / 632 / 638; Power 0,1kW; Power supply 400V 50-60Hz; Compressed air supply: 5–7 bar; Machine Dimensions 1100x780x2005 mm; Dljdpfxjw Uc H Ie Ab Tsa Weight 98 kg.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, swivel angle B-axis (min.): -100 °, swivel angle B-axis (max.): 100 °, TECHNICAL DETAILS Travel range X/Y/Z: 650 x 550 x 400 mm Travel range B: ±100° Travel range C: infinite Distance 320 mm pallet to spindle nose: 500 mm Distance faceplate to spindle nose: 600 mm MACHINE DETAILS Control cabinet weight: 300 kg Max. workpiece weight: 200 kg Machine dimensions (W x H x D): 2200 x 2830 x 2360 mm Machine weight: 7,000 kg Cooling unit weight (empty): 215 kg Space requirement (L x H x W): approx. 4,000 x 2,900 x 4,900 mm Operating hours: 39,100 h Machine power consumption: 30 kVA Djdpew T Th Tjfx Ab Tela Operating voltage: 3x400 VAC - 50 Hz Dust extraction: 2.2 kVA Power consumption cooling unit: 7.7 kVA Total connected load: 39.9 kVA Compressed air according to ISO 8573.1: 7 bar Max. particle size: 1 µm Max. particle concentration: 1 g/m³ Max. pressure dew point: +3°C Max. oil content: 1 mg/m³ Air consumption: 500 l/min Transport and storage temperature: +5°C to +55°C Operating temperature: +18°C to +30°C

Condition: used, Year of construction: 2023, Folding device | Disc type: serrated | Köckerling Rebell Classic 600 T 2.0 demo machine used from 2023 approx. 600 km - corresponds to approx. 480 ha technical data and equipment: approx. 6,200 kg dead weight 180 HP power requirement lower link attachment cat III/IV spiral-sprung disc suspension knife roller Dledpfov Aqwmex Ab Tsa 2-circuit compressed air brake following harrow DSTS roller lighting certificate for obtaining an operating license incl. | internal number: 11202855

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Dljdpfx Asxa Elcob Toa

Year of construction: 2025, condition: new, Vertical packaging machine with auger dosing unit for powders. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm; suitable film width: 240mm; suitable film: composite film, heat sealable; dosing range: 1-50g; max. speed of the machine in neutral: 60 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L800xW960xH2050mm; weight: 300kg. Dlodpfx Ajv Nnigeb Toa Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input Hertz: 50/60 Dedpfx Aeu Afwlsb Tela Input phase: 3 Input power: 220/380/440V/3/50/60 Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: excellent (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 16000 U/min control HEIDENHAIN TNC 430 Number of axles 5 simultan table rotating 360 ° taper ISO SK-40 table diameter 280 mm rapid traverse 30wer m/min tool change unit 30 -fach weight of the machine ca. 6,5 t dimensions of the machine ca. 3100 x 2400 x 2500 m his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN Dodpfxevwgm Te Ab Tela - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.

Condition: new, Year of construction: 2024, working width: 6,000 mm, Folding device | Number of discs: 50 | Disc type: serrated | Köckerling Rebell classic 600 T 2.0 pulled disc harrow Dsdpfx Aev Aqwgeb Tola Year of manufacture 2024 - new machine technical data and equipment: approx. 6,200 kg dead weight 180 HP power requirement Lower link attachment Cat III/IV Spiral-sprung disc suspension Knife roller 2-circuit compressed air brake Follow-up harrow DSTS roller Lighting Expert report for obtaining an operating license incl. | Internal no.: 11178903

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Dodpsw Uk A Rofx Ab Tjla

Condition: new, Year of construction: 2025, Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm; suitable film width: 240mm; suitable film: composite film, heat sealable; dosing range: 1-50g; max. speed of the machine in neutral: 60 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L800xW960xH1900mm; weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dlodpfx Aev Nniaeb Tsa

Year of construction: 2008, condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42603h, spindle hours: 20137h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Dlsdpfx Ajv Exrkob Toa

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Dljdpfx Abev Uqb Ne Tsa

Condition: ready for operation (used), Year of construction: 2015, An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible. Dedpfx Abjwnr I Ns Tela