Used Broaching for sale (199)

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Fgedpedbmgmofx Ah Esi Machine No.: 1413 General / technical data: Used vertical hydraulic internal machining machine with up to 3 machining stations, in ready-to-use condition. Pulling force: 13000 KG (maximum) Machining length: 1200 mm Machining stations: 3 Distance between machining stations: 100 mm Mounting diameter for the draw head: Ø 85 mm Passage width between the cylinders: max. 390 mm Cutting speed: hydraulically continuously adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1150 x 1500 x 3725 mm (tool delivery system extended) Power supply / rated power: 380 V 50 Hz / 7.5 kW Accessories / special equipment: The machine's draw bridge has 3 tool holders for machining tools, and the workpiece table has 1 machining station (can be modified). The tool clamping system and the tool delivery system are designed for a spring-mechanical locking system (DIN 1415). The machine has an automatic tool delivery system, and the existing mount for the tool delivery system is also designed for only 1 tool (middle machining station). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production use with medium batch sizes. The machine has an automatic cycle. For use, a machine pit or, alternatively, a platform is ideally required. Draw heads, tool holders, and tools are available upon request. The machine can be inspected in our warehouse while powered up.

Condition: like new (used), number 1 Stück Fgsdpfx Aezupmaoh Eei LIEBHERR/LORENZ disc cutting wheel Modul 4 - EW 30° - Zähne 12 - DIN 5480 - new

Condition: excellent (used), Spacer pins Manufacturer: Hassay Savage / Preci Tool Slot width: 3-4-5-8-12 mm Includes guide bushings and inserts. Fgodpfezy Hrdex Ah Esi

Year of construction: 1964, condition: refurbished (used), machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 weight: 3,2 to broaching force: 8.000kg Fsdpegyd S Djfx Ah Ejgi With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 35 A Fgodpfx Ajgyd S Seh Eei Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm table surface area 400x300 mm Fsdpfx Ajy D A Dyjh Ejgi a lot of tools

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Fedpeu D Aagjfx Ah Eegi

Condition: excellent (used), Keyway broaching machine hydraulic Manufacturer: Polymat 50/400 Keyway width: 3–50 mm Bore diameter: 13–500 mm Maximum broaching length: 400 mm Broaching force: 3 MP Table load capacity: 10 t Cutting speed infinitely variable from 0–20 m/min 11 feeds of 0.01–0.15 mm 380 volt 5.5 kW Accessories: - various broaching tools - enlarged clamping table 700 x 700 mm - jib for setting down the tool guide bar - operating manual - electrical schematic Fgsdpewxvb Ijfx Ah Eoi Transport dimensions: L: 1,500 mm W: 1,100 mm H: 2,340 mm Weight: 2,200 kg

Condition: new, Year of construction: 2026, Brand new, high-precision vertical broaching machine – a machine of exceptionally high quality. CNC-controlled vertical broaching machine with two, three (or four) CNC axes and electronic control of the rotary table with a positioning accuracy of 0.001°. For the efficient production of spline grooves (including tapered and tangential grooves) – keyways, internal and external gears, racks, etc. CNC control with a 10” color display and touch screen – software for roughing, finishing, and fine finishing (to achieve surfaces with the highest possible quality). Stroke range of the broaching tool holder: 10 to 250. Broaching tool holder speeds: 22 to 90 strokes/min, infinitely adjustable. Broaching tool holder swivel range: +/- 20°. Rotary table size: 450 mm. Bore in the rotary table: Ø 135 mm. Maximum table load: 1,250 kg. Table travel distances, longitudinal and transverse: 250 x 225 mm. Drive power, servomotor for the broaching tool holder: 3 kW. Machine dimensions without control console: 1.3 x 1.45 m x approx. H 2.6 m. Fgsdpfez Dpcqex Ah Eji Machine weight: approx. 1,700 kg. - Automatic, electronically monitored central lubrication system for the guide rails. - Cutting fluid system for cooling and lubricating the broaching tools. Other models available.

Year of construction: 1971, condition: used, General / technical data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12to tractive force: 25to maximum stroke: 2000mm clamping surface: 500 x 500 table opening: 550mm power supply: 380 Volt / 50 Hz Fjdpfx Ajlwvm Aeh Ejgi Accessories/ special equipment: - tilting table Remark: The machine is under power in our warehouse and can be inspected.

Condition: used, Year of construction: 1987, machine/vehicle number: 34, -WAG 570- Manufacturer: Forst Model: RTS 10x1000x320 Year of manufacture: 1987 Weight: 4,300 kg Fsdpfx Aend Dmeh Eegi Machine No.: 34 General / technical data: Used vertical hydraulic tube cutting machine, for cutting tubes. Pulling force: 10,000 kg Cutting length: 1,000 mm Number of cutting stations: 1 Distance between cutting stations: not applicable Cutting speed: 7.5 m/min Return speed: 24 m/min Total power: 22 kW Power supply / connection value: 380 volts, 50 Hz

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Fgjdezdpvgopfx Ah Eoi Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Fgodpfx Ahsv Tctuj Esi

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo Fgedpfxeu Ng T Uo Ah Eoi i.D. *

Condition: excellent (used), Year of construction: 1991, Keyway broaching machine Elmass, suitable for keyways up to 14 mm wide. Maximum working stroke 200 mm. Fgsdold S S Sjpfx Ah Eji Thanks to the bore-guided tool, this Elmass system can also be used to broach extra-long keyways. Tools for standard bores with diameters of 6-50 mm and keyway widths of 2-14 mm are available. This tool system is also suitable for blind hole drilling. Thanks to the 400 mm rotary table, multiple keyways can also be broached.

Year of construction: 1960, condition: used, max. pulling force: 20,000 kg max. stroke: 1250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm Number of tool stations: 2 The machine is equipped with a 2-station rotary indexing table. The machine is equipped with an automatic tool feeder and is designed for manual series production. The tool locking mechanism in the drawbar and in the tool feeder is spring-loaded (pull head according to DIN 1417). Fodpfjui Sbex Ah Eegi

Year of construction: 2000, condition: used, machine/vehicle number: 3167, Broaching-force: 16 t Stroke: 16 t Fodpsccxqtofx Ah Eogi Weight: 8,5 t

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Fjdpoxclfzefx Ah Eogi Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Capacity: 10 Ton Includes various tools The machine is in good working condition. Fodpfxjx D Diho Ah Ejgi Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT.

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Stroke: 1000mm 3 Broaching-stations Fgodpfobrcmkjx Ah Eoi With chip-conveyor + platform and safety door

Condition: good (used), max. ram stroke 230 mm Fgodpsw Ny S Rofx Ah Eoi throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Condition: ready for operation (used), A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible. Fsdpsx Uq Twsfx Ah Eegi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1963, overall weight: 3,000 kg, total length: 3,900 mm, total width: 800 mm, total height: 1,850 mm, TECHNICAL DETAILS Stroke: 1,500 mm Capacity: 10 t Motor power: 7.5 kW MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 3,900 x 800 x 1,850 mm Net weight: 3,000 kg Transport packages: 2 Fjdpfoy Himmox Ah Eegi EQUIPMENT Documentation

Condition: used, groove width 3-28 mm tool length - max. 1200 mm working speed 3m/min+6m/min m/min pulling capacity 60 kN bei 3m/min kN pulling capacity 40 kN bei 6 m/min kN stroke 1050 mm weight of the machine ca. 600 kg Includes a wide selection of reaming needles The following needle widths are available (approx. dimensions): 6; 6; 8; 12; 14; 16; 18 The following mandrels (approx. dimensions): Fedpfjyz Dgdox Ah Eegi Ø 17; 19; 21; 30; 38; 44; 50; 58

Year of construction: 1986, condition: used, machine/vehicle number: 133, Force: 25 to Fgsdpfx Asbrcmlsh Esi Stroke: 1600mm 1 broaching station, system 1417 Helical function defeatable, so machine can be used conventionally also!