Used Broaching for sale (198)

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Bwjdpfx Alsx Iwfmsbsn Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: reconditioned (used), functionality: fully functional, cutting length (max.): 3,150 mm, ESPE HYDRAULIC guillotine shears model CNTA 16A/3150 FOR cutting sheet metal Output parameters of the machine: - maximum cutting length - 3150mm, - maximum thickness of cut sheet metal - 16mm, - table width - 160mm, - cutting angle - 0.5 - 2.5 degrees hydraulically adjustable, - working height of the table - 850mm, - beam drive and sheet metal pressure - hydraulic, - adjustable gap - electric drive, - adjustable depth (width) of cut - depending on the set angle, - main drive 30kW, - auxiliary drives 2.5kW, - adjustable numerically controlled bumper - AC servonap, - friendly and simple CNC numerical control Bwjdjuq Eh Sepfx Albjn - weight about 16500kg, CNC control: Control built on the basis of industrial automation components (from Delta Electronics) equipped with a touch-screen operator panel for setting work parameters: - setting the thickness of the material (automatic slot adjustment) - setting the knife working depth (cutting width - reducing time when cutting narrow details) - setting the position of the cut material bumper - setting the working angle of the knife - possibility to program a sequence of cuts up to 50 operations for one sheet (automatic change of depth setting, bumper setting, sheet thickness, knife angle setting, cutting width) after each cut. This makes it possible to cut the entire sheet in a preset sequence, without the need to constantly rearrange the sheets.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) Bwedpfjx U Tr Aex Alben *Operating manual (Russian) Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: good (used), Clamping table, clamping angle, T-slot table, milling machine table for shaping machine, shaping machine, high-speed planer, broaching machine, slotting machine, slotting machine, slotting tool, broaching machine, shaping machine, horizontal shaping machine, planing machine, Schepping -T-slot plate: Mounting plate with adjustable angle of inclination -Groove width: 20 mm Bwsdeiaql Tjpfx Albjn -Slot spacing: 105 mm -Overall dimensions: 640/400/H360 mm -Weight: 103 kg

Condition: excellent (used), Multi-slot broach, broaching tool, broach needle, special tool, slotting tool, slotting machine, slotting machine, slotting tool -Number: 2 tools available Price: complete set of 2 pieces Bsdjb A I Upepfx Albewn -1x Tool: Ø 16 0.056 -1x Tool: Ø 15.75 x 16Ø S8 -Weight: 2 kg

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg Bwsdpfx Aolzmxyolbon

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x2000 Main advantages: - Versatile applications : The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction : The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision : The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle : Reinforced bearing system in the spindle and a large passage of 82 mm guarantee optimal efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm , a 5.5 kW motor. - Efficiency and productivity : The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading : Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 TPI, modular (34) from 0.1 to 7 MP and DP (50) from 4 to 112 DP - Precise counting of turns : The lathe is equipped with a threading clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use : The intuitive control panel on the gear unit allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements : The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690mm x 240mm Canine height 230mm Distance between fangs 2000mm Bed width 300mm Maximum knife cross-section 25x25mm Total travel of the cross slide 290mm Total upper slide travel 120mm Spindle bore diameter ø82 mm Spindle tip D1-8 Spindle socket (cone) ø90 (1:20) Number of spindle speeds 12 Bwjdpfxev E Eiio Alben Spindle speed range 25-2000 rpm Lead screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (threads per inch) (60) Metric threads 0.1-14mm (41) teeth per inch tooth pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev (42) Cross feed 0.014-0.784mm (42) Total travel of the tailstock bearing liner 120mm Tailstock bearing sleeve diameter ø60 mm Gear modules MT No. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 3220x1040x1340 mm Weight 2785 kg

Condition: new, Year of construction: 2026, Semi-professional CORMAK 330x915 universal lathe for metal is equipped with a 12-speed gearbox with an induction motor (constant speed) 1.1 kW/400V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks such as internal and external surface turning, tapers, polishing, metric and inch threading, drilling and broaching. Technical data: Max. turning diameter over bed: 325mm Max. installed part length (in tusks): 915 mm Max. length of installed part (turning chuck/center): 830mm Turning diameter over carriage: 208mm Bed width: 160mm spindle bore: 38mm Spindle taper: MK5 Turning post dimensions: 78 x 78 x 20mm Max. tool dimension: 16x16mm Top slide range: 100mm Longitudinal feed range: 153mm Longitudinal shift range: 800mm Spindle speeds: 12 spans (L/H) Spindle speed range: L: 65, 90, 120, 120, 160, 300 / H: 380, 500, 640, 850, 1100, 1650 rpm. Longitudinal feed range: 0.087-2.218 mm/rev Traversing range: 0.019-0.477mm/rev Spindle nose: MK5 Metric thread: (16) 0.25-6mm Inch thread: (24) 4-120 T.P.I. Tailstock liner diameter: 32mm Tailstock sleeve tip: MK3 Tailstock liner travel distance: 75mm Engine power: 1.1kW / 400V Pump size: 0.1kW Weight: 390 kg Bodpfx Alsm Nb Srobewn Dimensions: 1770x740x1600mm Equipment: Lathe base 2-axis digital readout (optical ruler) 160mm 3-jaw lathe chuck Jaws left Fixed Tooth: MK3 Change wheels Spindle reducer Cooling system Lubricator Handle and holder wrench A set of maintenance tools CE safety guards Manual in Polish CE Declaration of Conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Keyway broaching machine hydraulic Manufacturer: Polymat 50/400 Keyway width: 3–50 mm Bore diameter: 13–500 mm Maximum broaching length: 400 mm Broaching force: 3 MP Table load capacity: 10 t Cutting speed infinitely variable from 0–20 m/min 11 feeds of 0.01–0.15 mm 380 volt 5.5 kW Accessories: - various broaching tools - enlarged clamping table 700 x 700 mm Bedpfx Ajwxvb Islbewn - jib for setting down the tool guide bar - operating manual - electrical schematic Transport dimensions: L: 1,500 mm W: 1,100 mm H: 2,340 mm Weight: 2,200 kg

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. Bwedpfx Alot Hxagebsn This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, functionality: fully functional, Type: Hydraulic Guillotine Manufacturer: HJO, Sweden Year: 1984 Max. plate thickness 4 mm Bedpjxgcz Ijfx Albown Max. plate length 2500 mm Max. operating pressure 21.0 MPa V 3 x 380 Hz 50 Weight 3700 kg Quick action blade clearance adjustment, floor pedal control.

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Stroke 500mm, 320mm and 200mm Bwjdpfxjtz S Hcj Albjn

Condition: excellent (used), functionality: fully functional, Slotting machine Urpe model M-300 G of tilting head, Slotting of course of 0-300mm of travel, number of blows per minute 30-35-40, distance of the tool to the column 500mm, distance adjustable from the table to the ram 425 -585mm, max distance between tool and body 450mm, table surface 800x325mm, long table travel 550mm, rec transv 265mm, motor pot 5.5cv, estimated weight 1850kg, with Chuck Bjdpfjvdknzox Albown

Year of construction: 1965, condition: used, groove width 3 - 90 mm drawing length 430 mm working speed 4 - 12 m/min slot-milling length 400 mm return speed 15 m/min Bwsdpfxetv Iatj Alben total power requirement 5,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,3 x 1,7 x 1,5 m • with various honing needles and guidances

Condition: excellent (used), Year of construction: 1991, Slotting machine Elmass, suitable for keyways up to 14mm width. Maximum working stroke 200mm. With this Elmass system, thanks to the bore-guided tool, it is possible to push even extra-long keyways. Tools for standard bores of diameter 6-50mm, slot widths of 2-14mm are available. Bwedpfxjld S S So Albon This tool system is also suitable for blind holes. Thanks to the 400mm rotary table, multiple keyways can also be cut.

Condition: excellent (used), Habegger ( Burri / Petermann) Can & Spline Slotting Machine Bwjdewwmr Ijpfx Albjn Swiss made

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Bwodpfjhad Avjx Albsn Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth

Condition: used, Year of construction: 1966, max. tractive force 5 t, max. stroke 850 mm, max. cutting speed 12m/min, max. return speed: 25m/min, clamping surface 410x575 mm, groove width 3 - 90 mm, bore 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base under floor 1.400 mm Bwjdpfx Aocm Elnjlbsn

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Bjdpfx Aelu D Hkolbjwn Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Year of construction: 1997, condition: excellent (used), Universal Turning key drawing machine from Cardinal apply for toolmaker , mold maker, education and Locksmith Slot width 3 - 100 mm max. groove length 1250 mm Bjdpoin Dkzjfx Albswn Pulling force 6000 kg Draw length 1250mm Motor 5,5 KW Weight 1650 kg Dimensions 1000x1650x1000mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, AC motors for spindle speed and feed Chip conveyor No. 2 polygon milling/thread milling devices No. 1 broaching unit No. 1 threading unit Bwodpfx Alexyghfebjn No. 1 pick-up with retraction slide No. 1 deburring unit No. 1 rack milling device No. 2 wedge recesses No. 2 marking devices No. 1 carriage on 6th radial CNC axis (Siemens), with X and Z No. 2 sensors for length control of short, non-threaded or first of bar piece, with automatic discharge into bin at 4th and 8th station Giovanni Cucchi integrated bar feeder No. 1 bar elevator Tool holders

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min Bwsdpfx Aewu Suvjlbsn - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: excellent (used), Year of construction: 1974, machine/vehicle number: AKK60945ASK8560, Manufacturer: Frömag Model: KZH 90 x 1500 Year of manufacture: 1974 Machine No.: AKK60945ASK8560 Weight: 1,35 t Technical data: max. tractive force: 7.000kg max. stroke: 1565 mm max. cutting speed: 2-6 m/min (infinitely variable) max. return speed: 2-6 m/min clamping area: 410 x 610 mm passage width: 0 open table groove width: 3 - 100 mm in bores from: Ø13 - 500 mm depth of machine base under floor: 2500mm footprint (l x w x h): approx. 800 x 1.100 x 1.100 mm power supply: 380V / 50Hz / 4,73kW Accessories: Dividing head-TA Twist groove drawing device for the production of twist grooves Serrations Bodpfxjlp Im Hj Albown internal splines div. tools for the production of internal splines and grooves Remark: Optional: machine can also be used for profile broaching.