Used Brewery for sale (93)

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths Tsdpfsvrfivsx Acnsb - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  - Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) - Formats: - crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise Tjdpfxjvm D Ums Acnjb - crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise - crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise - crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise - Horizontal and vertical spray nozzles - Spraying with hot caustic and fresh water - Caustic heater with temperature regulation is integrated in the machine - Machine is heated by steam - Dimensions: - Length: 4800mm - Width: 900mm - Height: 1400mm - Weight: 1800kg - Sieves for removal of dirt - Incl. documentation - Incl. spare parts list - Incl. Electrical diagram

Condition: used, Year of construction: 2016, Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16 Tjdpfx Acjuhthyjnsb

Condition: used, Year of construction: 2018, Overview  The crater was used in a Belgian brewery and was stopped in Summer 2024. It was used to put 330ml bottles with mechanical closure into a wooden or plastic crate. Technical Details  Manufacturer: TMG Year of manufacture: 2018 Model: IEC 61439-2 Bottle Format: 330ml Crate format: 4x3 wooden or plastic crate Capacity: 8 cycles per minute Tsdpsuhthtofx Acnjb

Condition: used, Year of construction: 2016, Overview  This complete filling line for glass bottles was part of a brewery and consists of a filler and capper block, labeler and a carton capper. The entire equipment was built in 2016 and has already been dismantled and stored. Scope of delivery Isobaric Filler & capper | cimec | AM DPS 811G | 2016 Output: 1,200 bph (at 0.33l) Designed for 0.33l glass bottles Labeler | murcia codificacion | MC-220 | 2016 Output: 1,300 bottles/h Adaptable to 1.5L bottles Carton sealer | Siat | SK2 | 2016 Todpfx Acstt Um Aonjb

Condition: used, Year of construction: 2014, Overview  This brewhouse from Hungarian manufacturer ZIP was built in 2014. It has been well maintained with regular servicing and is in outstanding condition. It has been owned by a craft lager brewery in the UK who are now upgrading due to expansion. All the equipment is still in operation and can be viewed in person.  Scope of delivery  Brewhouse, 10 HL | Zip Technologies | 2014 HLT, 1650L | Zip Technologies | 2014 Whirlpool, 10HL | Zip Technologies | 2014 CIP, 150L x 2 | Zip Technologies | 2014 Electric Steam Generator, 120A | Zip Technologies | 2014 DPV (Dual Purpose Vessel) x 3, 13HL | Zip Technologies | 2014 DPV, 10HL | Brew Tek Mill 2 Roll + Premasher | Zip Technologies | 2014 Chiller, 15KW | 1000L Glycol + 1000L Chilled Water | Zip Technologies | 2014 Lagering Tanks x 2, 10HL | Bier Drive | 1984 Keg Washer/Filler | Zip Technologies | 2014 Todpfx Acsr Hkaqenjb

Condition: used, Year of construction: 2013, Overview  The pressure filler was built in 2013 by the German manufacturer KHS. The pressure filler is still in use at a large German brewery and can be inspected at any time.  Technical data  - Capacity: 22,000 - 65,000 bph  - Number of filling stations: 168 - Number of capping stations: 24  - Pitch circle filler: 5040 mm Scope of delivery  - Valve node - Vacuum unit - Hygienic inlet - Fill level and closure inspection Todpfjl Sm S Dox Acnjb - Rejection and rejection belt - Technical documentation - Incl. program backup - Extensive transporters available, which can be purchased additionally

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Tjdpfel Hx Rpsx Acnsb

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Todpol Hx Adsfx Acnjb

Condition: used, Year of construction: 2021, Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm Tedel Hxnxjpfx Acnjb

Condition: used, Year of construction: 2005, Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available Tsdpel Hxmpjfx Acneb

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Tsdpfx Asl Hxmdscneb

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h Todpfjzvfbcjx Acnob - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: used, Year of construction: 2015, functionality: fully functional, total width: 90 mm, total length: 136 mm, overall weight: 200 kg, input voltage: 400 V, Equipment: crane, For sale is a Speidel Braumeister 200-liter brewing system in very good condition. The brewing system was previously used but is in excellent technical and visual condition and has always been carefully maintained. Details: • Speidel Braumeister 200 liters • Used, but in very good condition • Ideal for ambitious home brewers and smaller commercial breweries • Location: Italy If you are interested or would like more information, please send a message. Accessories are also available for sale. Tsdjzwn U Uspfx Acnjb

Year of construction: 2006, condition: used, This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions. Capacity: 240 hl/h 2 stages Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm Operating pressure: 23 bar Length: 2000 mm Width: 700 mm Height: 2000 mm Tjdpfxjztzbyo Acnsb

Condition: used, Year of construction: 1979, This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions. Additional title: puffer tank Capacity: 17800 l Working pressure: 4 bar Length: 4,8 m Width: 2,4 m Height: 3 m Weight: 2000 kg Material: stainless steel Position: horizontal Tjdpfszty Ifox Acneb Features: DN80 Periphery: After consultation, we can equip the tank with the desired fittings as far as we have them in stock.

Condition: used, Maselli Misure, Analysis System IB-01 for carbometric analyse in brewery and juice production, Good condition Tsdpfoc Npzzex Acnjb

Condition: used, Year of construction: 2018, Overview This DUETTI case packing group combines a case erector, a case packer and a top-loading case sealer for American-style cases, built by Duetti Packaging (Galliera Veneta, Italy) in 2018 and commissioned at the end of 2018. It packs bottles in 12 x 33 cl and 6 x 75 cl formats at approx. 6,000 bottles/h (33 cl) or approx. 3,000 bottles/h (75 cl), around 10 cases/min. The group is still installed and under power at a brewery in France and can be visited in production on request. Technical data - Manufacturer: Duetti Packaging (Galliera Veneta, Italy) - Model: FORMER 20H + PACKER 10 + CHMSS - Year of manufacture: 2018 (commissioned end of 2018) - Machine type: case former - case packer - case sealer group, American-style cases (carton) - Case formats: 12 x 33 cl and 6 x 75 cl - Capacity: approx. 6,000 bottles/h (12 x 33 cl), approx. 3,000 bottles/h (6 x 75 cl) - approx. 10 cases/min - Gluing: hot melt, Meler Micron 5 unit Equipment - FORMER 20H case erector: carton magazine, vacuum gripper, bottom folding and gluing with 4 nozzles, pressure cylinder and pad, 90° discharge towards the packing section - PACKER 10 case packer: 4-lane bottle distributor, batch formation via sensors, gripper head with inflatable tulip grippers, Cartesian-type movements - CHMSS top-loading case sealer: 4 glue nozzles and pressure rollers - Meler Micron 5 hot-melt unit - Case transport through former and sealer via rough-surfaced side belts (no push bars); conveyor in the filling section - Inclined transfer belt between filling and sealing, convertible to horizontal by removing the sealer foot extensions - Technical documentation (operating manuals, electrical schematics) and CE declarations of conformity Please note: case marking / coding is not included in the scope of delivery. Condition Used - in production: the group is still installed and under power and can be visited in operation on request. Availability Tedpfxszrpwts Acnsb From February 2027 - the line remains in production until the end of January 2027 and is dismantled thereafter. Location: France.

Condition: ready for operation (used), Year of construction: 1972, A filter system from brewery operations is available. Plate dimensions X/Y: 1000mm/1000mm, filter area: 1m²/plate, number of layers: 86, throughput capacity: 150hl/h, operating pressure: 8bar. The hydraulics were overhauled in 2019. An on-site inspection is possible. Tsdsy H I E Ispfx Acneb

Condition: ready for operation (used), Year of construction: 2021, A Gernep cold glue labeling machine that has been used in the brewery industry is available. Rated capacity: 5000bottles/h, direction of operation: LM, control range: 1000-6000bottles/h, glue application height: 330mm, bottle material: glass, bottle volume: 330ml/500ml, min. label length range: 25mm-130mm, max. label height: 130mm, max. label height lower edge/upper edge: 15mm/320mm, application: swing-top label/body label. Including cold glue unit, prepared wet glue unit, date coding, height adjustment, overload clutch, infeed and outfeed tunnel and foot extension with floor plate. Documentation available. An on-site inspection is possible. Expected to be available from the end of May 2026. Tsdpfxoy N Dfio Acnsb

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Tsdpfxozrihxj Acnjb Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Year of construction: 2024, condition: new, functionality: fully functional, VAPOREX DS4+ Hybrid Steam Cleaner with Vacuum Kit; list price €6,990.00 For sale is a VAPOREX DS4+ in an industrial version, including a vacuum kit. This system is ideal for professional cleaning in industrial settings, food production, breweries, pharmaceutical companies, the food service industry, as well as in machine and plant engineering. The combination of hot steam and vacuum extraction effectively loosens and immediately removes dirt and contaminants. In many applications, the use of cleaning chemicals can be significantly reduced or even completely eliminated. Features: VAPOREX DS4+ Hybrid Steam Cleaner Vacuum Kit / Extraction System Extensive range of accessories Robust industrial design Advantages: Powerful steam cleaning Simultaneous loosening and removal of dirt Reduced water and chemical consumption Tsdpfx Aeztm T Uscnjb Ideal for hygiene-sensitive areas Versatile for use on machines, equipment, pipes, floors and surfaces The machine is NEW and ready for immediate use. Also ideal for car detailing. Inspection is possible by appointment at the warehouse in 6840 Götzis.

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1124, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 70 Year of manufacture: 1977 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 4300 liters Tsdpfx Aetqf A Rocnjb Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: 28 segment clamp screws 78 strainers Dimensions: Volume 4300 L Length 4200 mm width 2200 mm Total height 4800 mm Last use: Food (brewery) Technical documentation: Yes

Year of construction: 1983, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1470, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 50 Year of construction: 1983 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 3100 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: Tjdpfx Aotqf A Eecneb 28 segment clamp screws Dimensions: Volume 3100 L Length 4900 mm Width 2400 mm Total height 4100 mm Last use: Food (brewery) Technical documentation: Yes

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Todpfx Acoztma Usnjb Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.