Used Nagema for sale (9)

Condition: ready for operation (used), Same as Hobart PVM for pureeing, straining, stirring, mixing, chopping and emulsifying various types of food · for processing e.g. soups, vegetables, fruit, sauces, purees, jams, mayonnaises, dressings, etc. · Speed ​​can be continuously adjusted using the rotary knob · for kettle sizes from 60 to 600 litres · Hygienic design in stainless steel · Mobile using two CNS fixed castors and two lockable CNS swivel castors · Fan-free motor in hygienic design in CNS (no cooling fins, no fan cooling) · Speed ​​range continuously from approx. 600 to 1,500 rpm. · Switching on and off via pushbutton control, with emergency stop button · Electrical housing in waterproof chrome-nickel steel design · Automatic safety shutdown (motor only runs in the specified working range) · Puree unit made entirely of stainless steel · With two sieves (fine and coarse) · With ceramic-coated drive shaft · Drive shaft with additional Teflon seal (with FDA approval) Kjdpfxeuwrt Ne Afionc · Puree unit can be dismantled quickly and easily, protective ring with captive screws · Service and maintenance-friendly design Technical data: · All switching elements in protection class IP 69K (for cleaning with hot water jets) · Mains connection 230 V AC, 1.85 kW · Supply line 10 m (special cable with high mechanical strength), with Schuko angle plug · Dimensions: Resting position approx. 60 x 90 x 170 cm; Working position approx. 60 x 165 x 140 cm · Weight: approx. 110 kg

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Additional title: hot filling Capacity of filling line: 5000 bo/h Number of filling valves: 24 pcs Length: 1,64 m Width: 1,20 m Height: 2,10 m Kodpfx Afew Tmmvjienc Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Condition: used, Water or liquid filling line for PET containers – capacity approx. 6000 bph (2.0 L) Currently, the machines are configured for 2.0 L PET bottle formats (other formats not included). It is possible to adjust to smaller or larger PET bottles by preparing the appropriate equipment. The line includes: - Nagema BF-60 filler with 12-head bottle capping unit - Plate conveyors for PET bottles - Nagema saturator, type KOMI 160 - Spomasz wrap-around paper labeller - Bottle packer with control cabinet for creating multipacks, e.g. 2x3 - Electric shrink oven + cooling fan for multipacks - Pallet wrapper The last photo shows the layout and dimensions of the machines. Technical condition: the machines were operational up to the end of production in 2018. Inspection and maintenance are recommended before resuming production. Kjdpfxjwny Hgs Afisnc Optionally, a SIDEL SBO4 blower, which was last in operation on this line, can also be purchased.

Condition: good (used), CIRCULAR SAW Kedpj Dv Rbjfx Afionc Technical characteristics: *HYDRAULIC AUTOFEED *DISC DIAMETER 400 mm

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Ksdpfx Afon D Hm Seisnc L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: used, Year of construction: 2022, Overview  The glass bottle filling line was manufactured in 2022 and in use in a brewery in Spain. As the owner is now shifting his production to a contract bottler due to increased volume, this line is for sale. Plant in detail  Robot depalletizer | Kuka (Nownology) | KUKA KR 470 PA | 2022  Capacity: 15,000 bph Weight: 470 kg  Isobarometric Filler | Nagema | 40/10 | 1990 Completely overhauled/modernised and also equipped with a new control system in 2022 Unused since overhauling  Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Fill level inspection | Heuft | --- | 2022 2x Labeller | ENOS | S5000 | 2022 for self adhesive labels Capacity: 5,000 bph Self-adhesive labels  Number of labelling stations: 3 Length: 2.850mm Width: 1.500mm Height: 2.000mm Weight: 450Kg Electr. connected load: 2 kW Wrap around packer | SMI | WP300 | ---  Modernized in 2022 (unused since then) Robot palletizer | Kuka (Nownology) | KR240PA | 2022  Capacity: 15,000 bph Weight: 240 kg 4 - 14 kg boxes Scope of delivery Conveyors  Knsdpfxjmk I Dpo Afisc

Year of construction: 1989, condition: reconditioned (used), *originally pre-evacuation filler *converted to double pre-evacuation *with 30 filling valves and 10 head crown corker *including vacuum pump *In this filler 1,800 working hours were invested, that means everything was overhauled including a new ball bearing slewing ring. So the filler is in a really perfect top condition. *equipped for one bottle type (250ml) can be converted to up to 500ml *max 265mm heigh/85mm diameter *bottle conveyors and bottle lifter + corrugated box preparation unit Lantech can be discussed for additional cost. Ksdponi U Rujfx Afijnc

Condition: good (used), • overall dimensions 1600x1100x1900 mm; • power 5.8 kW; • power supply 400 V; Knedjlzhlcepfx Afijc • weight 600 kg.

Condition: used, Year of construction: 1990, Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Kodpfsl Hxmhex Afisnc