Used Brake Drum for sale (17,963)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Godpfxjyz Rwio Acwobk Operating hours: 3,297 h

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm Gbjdeyz Dgwspfx Acwjk dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Year of construction: 1965, condition: used, Press brake Gbsdpfsillxyjx Acwsk Factory Wilhelm Jonescheit type HYPM 125 -300 stroke 30 - 70 mm pressure 125 t weight 9150 kg

Condition: excellent (used), Year of construction: 2023, For sale is a JET drum sander 2244 equipped with a 1.8 HP motor and a maximum sanding width of 560 mm. The machine is in excellent condition and has been inspected and refurbished by our service team. Technical specifications: - Sanding width: 560 mm (1120 mm) - Sanding thickness: 0.8 – 102 mm - Infinitely variable feed rate: 0 – 3 m/min Gedpfx Acoyzqtqjwebk - With oscillation - Drum speed: 1450 rpm - Suction connection Ø 100 mm - Motor power: 1.8 HP / 230 V - Year of manufacture: 2023 / as new The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: JET 2244, drum sander, cylinder, oscillation, sanding machine Reference: R-L0B6O

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm Gedpsyzh Sdjfx Acwsbk OZU-318 100x80° R=20 H=100 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL No response to offers or requests for lowest price.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Stock machine // Subject to prior sale CNC-controlled press brake in all-steel welded construction with DELEM DA66S control, HAWE hydraulics, Fiessler AKAS II laser safety system, and CNC-controlled table crowning Technical data: - Maximum pressing force: 160 tons - Bending length: 3100 mm - Bending length between uprights: 2550 mm - Throat depth: 410 mm - Table width: 60 mm - Table height from floor: 870 mm - Installation height: 530 mm - Max. ram stroke: 260 mm - Closing speed: 200 mm/sec - Pressing speed: 10 mm/sec - Return speed: 160 mm/sec - Max. backgauge travel (X axis): 750 mm - Max. backgauge travel (R axis): 150 mm - Backgauge traverse speed in X axis, servomotor: 330 mm/sec - Backgauge positioning accuracy: +/- 0.03 mm - Motor power: 15.0 kW - Oil tank capacity: 180 l Equipment / Standard accessories: - CNC control “DELEM DA66S” for user-friendly graphical product programming. The controller calculates the bending sequence and all axis positions (including collision warning) at the push of a button, 24” TFT color touchscreen display, USB interface, network connectivity, and tool database for 100 punches and dies each. Graphical 2D programming, 2D preview during operation, up to 12 axes plus auxiliary functions. Includes PC programming software “Profile - TL" and remote service (teleservice) via TeamViewer. - Manual quick-clamp system for upper tools, Promecam/AMADA type, with screw lever, safety nose, and plastic pressure bar for secure clamping, even with narrow tools. Max. load: 100 t/meter - Split upper tool, "Amada System," manufacturer Italy, material C 50 (HRC 50-52), induction hardened and ground on work faces. Bending capacity: 100 t/meter. Standard delivery, division: 3 x 835 mm, horns left and right 100 mm each, remainder in smaller segments. Height: 66.6 mm - Lower tool / 4-way prism block CroMo 4, ground, 60x60 mm, standard V-openings: 16 - 22 - 35 - 50 mm - Modern design for side and top covers Gjdpfxsy Anftj Acwebk - Side safety covers with magnetic closure for quick opening/closing during tool changes - 2-axis backgauge system with ball screw drives and servo motors, CNC controlled, max. X-axis range 750 mm, R-axis 150 mm. Positioning accuracy +/- 0.03 mm, traverse speed: 330 mm/sec. Includes 2 laterally adjustable stop fingers. - "FIESSLER" double-beam laser safety system, type AKAS/LCII. Operation of the press only possible via foot pedal. Manually adjustable via linear guides in both vertical and horizontal axes for extremely easy and quick adjustment after tool changes. - Automatic motorized table crowning system WILA, integrated into the CNC - Front sheet supports (2 pcs) laterally movable on linear guides, height-adjustable by handwheel - Central lubrication with hand pump - Spring-back compensation via CNC - Oil fill - Operating manual in German with spare parts list - Hydraulic manifold, valves by HAWE/HOERBIGER - Hydraulic pump: tandem pump by HAWE - Relays and contacts: Schrak, Pilz, Siemens, Eaton or Telemecanique - CE conformity - Operating hours counter - Dual-color paintwork: Body RAL7015 slate grey; covers, swing arm and controller housing: RAL7035 light grey; support arms and front of side covers

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Gbodpewn Hfiefx Acwok Weight: 18,900 kg + Tools

Condition: excellent (used), Year of construction: 2013, Model Amada HFE M2 80 x 2500 , 8 axis Press Brake Gbsdpfx Aoy Amd Uecwjk Year 2013 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 2013, Used Durma press brake Model: AD R 30135 Capacity: 3050 x 135 tons Euro / Amada clamping Akas Fiessler laser Manual crowning Gjdpoyzf T Esfx Acwsbk Including tool set

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex works: CNC press brake Amada Promecan Model HFBO 125/40 Year of manufacture: 1991 Control system renewed in 2024 Delem DA 58 control Pressing force: 125 t Working length: 4200 mm Frame gap: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive: 11 kW Working speed: 8 mm/s Godpfx Aoy Alq Tocwjbk Weight: 10 t Many tools included Price: EUR 10,500— plus VAT, ex works

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Gsdpfjwnagtox Acwobk

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. Gbjdpforq D Nijx Acwek The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, This press brake will be auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme site. Gsdpfx Aeyzdlmecwebk

Condition: excellent (used), mileage: 106,601 km, power: 353 kW (479.95 HP), first registration: 04/2023, fuel type: diesel, tire size: 315/70/22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2023, General Information Gsdpjxw U Etjfx Acwjbk Cab: Sleeper High Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Gearbox: ZF TraXon, 12-speed, automatic Axle Configuration Tyre size: 315/70/22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: Parabolic suspension Rear axle: Max. axle load: 13,000 kg; Tyre tread left: 80%; Tyre tread right: 80%; Suspension: Air suspension Condition Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: None

Year of construction: 2016, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, For sale: Terra Select T60 on crawler chassis Year of manufacture: 2016 with approx. 7,000 operating hours Gjdpfoy Ahi Esx Acwjbk 81 kW JCB engine without Adblue Long discharge conveyors Extra-large feed hopper Drum: 2,200 mm x 5,500 mm

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. - Press beam OK - Block laser OK - Illumination (auto) OK Godjyytuhjpfx Acwsbk - Line laser Not OK I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Gjdpjy Afxqefx Acwsbk Rated cutting capacity: 6 mm steel sheet / ST 40 Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: new, Year of construction: 2026, OSTERBERGER HTAP.Servo Brand new 3-axis CNC press brake equipped with CYBELEC CNC control system CybTouch8, featuring automatic bend angle calculation, bend sequence computation, and full-color graphical display. Maximum pressing force: 630 kN Maximum bending length: 2,000 mm / 2,500 mm / 3,200 mm Distance between side frames: 1,580 mm / 2,080 mm / 2,700 mm Throat depth in side frames: 250 mm Ram stroke: 100 mm Maximum installation height: 320 mm Ram travel speeds: - Down: 50/6 mm/sec - Up: 60 mm/sec Table width: 160 mm Oil tank capacity: 120 liters Approximate dimensions: 2.6 / 3.1 / 3.6 m x 1.5 m x height 2.4 m Motor power: 5.5 kW Weight approx.: 4.8 / 5.5 / 6 t Two-axis precision back gauge - Adjustment range: 500 mm - R-axis: 90 mm Back gauge fingers glide on double linear guides Equipment: - Die block - Gooseneck bending punch Gjdpfx Acjy Afanowjbk - Quick-change upper tool system - 2 support arms on linear guides - Bending area lighting

Year of construction: 1969, condition: used, Power: 1 kW (2 HP) Dimensions (LxBxH): 260 x 107 x 251 cm Serial number: 682134 Year of construction: 1969 Blade length: 2600mm Godpfx Ajy Abt Djcwobk Strokes per min (no load): 25 - 50 Pressure capacity: 45 tons Stroke length: 50mm Unloading: 175mm Upper blade adjustable: 60mm Engine power: 3 HP Overall dimensions (LxWxH): 2600x1072x2515mm Equipped with documentation Online auction of metalworking machines and welding equipment (including SAFAN, DARLEY, SCHIESS, WMW/NILES, ABUS (hall) cranes, VDF, EWM, LINCOLN, FERREX, OP plants and ESAB welding columns, various welding roller stands and welding manipulators PEMA, ADK etc.) from the recent bankruptcy of Bronswerk Heat Transfer BV, the renowned manufacturer of heat exchangers for the oil and gas industry, among others, in Nijkerk, the Netherlands. The online auction opens Thursday 26 March and closes Tuesday 21 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 16 April Pickup days are on: - Wednesday 6 May - Thursday 7 May - Friday 8 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2025, Availability Stock status: Expected soon Gbedow Swixspfx Acwjk Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Transmission: ZF TraXon, 12 speeds, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: parabolic suspension Rear axle: Max. axle load: 13,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: air suspension Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: None

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment Gbjdpsyy Hgqjfx Acwok :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, Year of construction: 2016, operating hours: 27 h, total length: 3,900 mm, total width: 1,600 mm, total height: 2,300 mm, Weight: 6.650 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 27 - Drive system: CNC - Power [kW]: 7.5 - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2600 - Throat depth [mm]: 300 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 140 - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3900mm x 1600mm x 2300mm (l x w x h) - Transport weight [kg]: 6650kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gbedpfx Acjyrn Edowok Lukas van Rossum

Condition: used, Year of construction: 2010, total length: 3,200 mm, total width: 1,800 mm, total height: 2,000 mm, Weight: 4.500 kg - Year: 2010 - Documentation available: No Gedpoywuzdsfx Acwjbk - CE marking present: Yes - CE certificate present: No - Serial number: 7121/13220 - Drive system: Conventional - Power [kW]: 4.0 - Press force [ton]: 63 - Max. working width [mm]: 2550 - Max. stroke [mm]: 102 - Tools included: Yes - Options: Additional finger stop - Transport dimensions: 3200mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1984, total length: 3,500 mm, total width: 1,400 mm, total height: 2,500 mm, Weight: 6.800 kg - Year: 1984 Gsdpox R S Nrefx Acwjbk - Documentation available: No - CE certificate present: No - Serial number: 12552 - Drive system: Teach-in - Power [kW]: 5.5 - Press force [ton]: 80 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Tools included: Yes - Options: Digital readout - Motor power: 5.5kW - Transport dimensions: 3500mm x 1400mm x 2500mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Weight: 10.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Power [kW]: 11.0 - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Godpfx Ajyf Edwocwobk Lukas van Rossum