Used Book Back for sale (4,004)

Condition: excellent (used), Carbide saw back off grinder VOLLMER model AS810 Iijdpfx Aajiaca Sj Esd

Condition: good (used), Year of construction: 1977, Back off carbide saw grinder VOLLMER model NS120 Ijdpfx Aaef Rlgnj Ejid

Condition: good (used), Back off carbide saw grinder VOLLMER model NS700 Isdpegqalcefx Aa Eoid

Condition: excellent (used), Back off carbide saw grinder WIDMA AS800 Ijdpfjgbptcox Aa Eoid

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA) Iodpfx Aaotx Ux Rs Esid

Condition: used, Year of construction: 2000, functionality: fully functional, working width: 1,400 mm, Manual Sheet Laminating Machine, Gluing Machine Tünkers Forward 1450S This is a hand-operated machine where carrier and pressure sheets are processed manually. This well-maintained unit is suitable for a wide range of applications. For example, it can be used for laminating corrugated cardboard, corrugated board, cardboard, semi-cardboard, as well as films and fabrics. The maximum sheet size is 1400 x 1400 mm, the minimum sheet size is 200 x 280 mm. Carrier material weight approx. 250 g/m² up to approx. 8 mm thickness possible. The weight of the top material can range from approx. 80 g/m² to 800 g/m². Depending on material and size, up to 600 laminations per hour are achievable. Training and instruction on the machine and its operation can be provided if needed; we are happy to assist! Currently, the machine is located in Viersen-Dülken. If you have any questions, please feel free to contact us. Ijdpfxey Svqpe Aa Ejid

Condition: excellent (used), Year of construction: 2017, Ref:11120 . 2017 JUKI LU-114-4 Flat Bed Book Sewer Iodpfxezkgf Sj Aa Eoid For through-book sewing for special applications such as Passports & Bank books. Hand fed operation Continuous single stitch Specification: Maximum thickness: 5 mm.

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Iiodpfx Aasziyvhe Esd Power supply: 230V Machine weight: 80kg

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. Iiodpfx Ajupzn Eoa Ejd ✅ PR 50 Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. Iisdpfx Aowc Nrnja Esd The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Iiodpfx Aasxtau Ee Eod Max. book size 380x320 mm Min. book size 120x100 mm

Condition: used, Product: Big bag sack holder. Condition: used Iodpfxoxdh E Hj Aa Eeid Dimensions: 2400 x 1450 x 1100 mm Load capacity: 1 t Available quantity: 32 pcs Stackable.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, The PräLomo Pro is a pneumatic machine for rounding book block spines with a large format range. Year of manufacture: 2012 Block thickness (in mm): 8 - 80 Ijdpfx Aezktwzsa Eeid Width (in mm): 1040 Weight: 87 kg Height (in mm): 1140 Depth (in mm): 480 Performance Output (in units/hour): 150 Performance class: Class 2: 101 - 200 units/hour Format ranges Block height (in mm): 0 - 520 Block thickness (in mm): 8 - 80 Connections Electrical connection: 230-240 V / 50-60 Hz Electrical power: 430 W (machine), 1000 W (heating plate) Compressed air connection (in bar): 6 Other features Category: Book block production, finishing, embossing, personalization Advantages The PräLomo Pro is our most advanced machine for rounding book blocks. It is very easy to operate, and with a little practice, any user can produce perfectly rounded books. The temperature can be adjusted via the controls on the table. The desired block thickness can also be quickly changed on the table top. Overall, all common formats can be processed. The force of the rounding plate is controlled via a foot pedal, so that the rounding plate exerts pressure on the book block depending on how the foot pedal is operated. A heating plate is used to warm up the adhesive binding, making the spine flexible for subsequent processing.

Condition: used, Year of construction: 2025, Book stacker Müller Martini BLSD 650 (A501.1000) Year: 2025 Description: - Compensating stacker Iisdpfx Aaeyr E Dkj Eed - Turning device: 90 & 180 degrees - Roller table delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 390 x 285 x 90 mm Minimum size range: 115 x 100 x 5 mm Maximum pile height: 340 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Isdszkb T Dspfx Aa Esid Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 153 mm Ijdpfjduiw Ijx Aa Eeid -Passage: Ø 40 mm -Weight: 7 kg

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm -Weight: 9 kg Iededz U Syopfx Aa Esid

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Iisdpfegtd A Dox Aa Esd -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg

Condition: used, Four-jaw chuck, 4-jaw chuck Iodped Ac Iyofx Aa Esid -Chuck size: Ø 190 mm -Passage: Ø 57 mm -Weight: 10 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Iodjhhf Abepfx Aa Ejid -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg Iodpfjg I D N Iox Aa Ejid

Condition: used, Four-jaw chuck, 4-jaw chuck Ijdsdykbtopfx Aa Eoid -Chuck size: Ø 160 mm -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg

Condition: good (used), Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm Iedpfed S Rfqsx Aa Ejid -Hole circle: Ø 230 mm -Weight: 24 kg

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg Isdef A E Hbspfx Aa Esid

Condition: used, Ceramic backings for wire electrode, welding wire, welding wire -Weight: 10.2 kg -Number: 1x packages available Iiodpfxed Idwfe Aa Eod -Price: per package -Weight complete: 10.2 kg/package