Used Book Sewer for sale (1,204)

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press Gsdpfjz Rk Nysx Akysbu This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Gedpfx Aez Rk Hrskyobu Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air. Gbsdpfoz N Skcjx Akyju

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Gbsdpfx Asxtau Eskyou Max. book size 380x320 mm Min. book size 120x100 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Gjdpfx Akozpfiyjyobu Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Video available upon request!

Condition: reconditioned (used), Year of construction: 2012, FRITSCH croissant line with wrapping machine, fully automatic two dies for small and large croissants on rollers made entirely of stainless steel Tested Gjdpoghwirsfx Akyebu Connection: 16 Ah If you have any further questions, please call me. Thank you.

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. Gbodsz Dtcbspfx Akysu 380V power supply + compressed air.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Gsdpfjz Rk N Tox Akyebu Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: Gjdpfx Akjz N Shnoyobu touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: good (used), Kolbus VDB Cover bender This machine is in very good condition and ready to use. Manufactured by Kolbus, Germany. The pressure rollers feature smooth adjustment of the gap and cover straightening power. The entire unit is mounted on a convenient base with wheels. Gbedpfxez Rk Rdj Akyju Working width: 750 mm Power supply: 380V Weight: 150 kg

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Gbodpszw Raaofx Akyeu Easy to use, quick to set up.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Gsdpfx Akoy D D A Dsyobu Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Gbsdozyz Efepfx Akyeu Machine weight: 80kg

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Gbsdpfx Aey Avl Iokysu Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Number of Clamps: 5 clamps Gsdpfx Akjxz A Tmjyobu Glazing unit Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 80 mm Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Condition: used, Year of construction: 2000, functionality: fully functional, Smyth Sewing Machine 160 Maximum Mechanical Speed: 10,800 cycles/hour Min. Signature Size: 80 x 135 mm (off-line) Max. Signature Size: 320 x 420 mm (off-line) Number of Sewing Stitches: 8 Sewing Stitch Length: 24 mm Power Consumption: 4 kW Gjdexzzruspfx Akyebu Standard Voltage: 400V–50Hz, 3Ph Max. Air Consumption: 200 Nl/min at 6 bar Total Weight: 2500 Kg Machine Dimensions (L x W x H): 1.7 x 2.67 x 1.7 mt

Condition: excellent (used), Year of construction: 2011, operating hours: 12,500 h, Ref:11160 . 2011 Muller Martini Acoro A5 Preparation Binder ONLY 12,500 HOURS WORKED! Preparation line for producing lined book blocks for hard cover production or soft bound books. Comprising: Triple hand feed element to spiral raceway element 3641 Gbjdpfx Aoz Izapekyou M.M. 3648 Twin end sheet feeders with Robatech hot-melt gluing M.M. Automatic motorised make-ready with “Commander” control system M.M. ‘Acoro A5’ binder with 20 x 21” Combi-clamps ICS 80 & ICS 30 Hot-melt pre-melt tanks Hot-melt spine gluing Hot-melt side gluing Gauzing/lining unit Pile/rotary cover feeder with pressing & nipping station 2nd nipping station Lay-down delivery unit to; Flat conveyor system (details on request) to; M.M. 3671 ‘Merit S’ automatic pile trimmer with auto setting. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm

Condition: good (used), Zechini Angolar M automatic corner cutter Production Italy. Perfect condition. This is a professional, production device for rounding corners and for cutting corners for hardcover. A solid cast iron construction, strong pressure ensure precise operation. Replaceable knives (7mm radius knife included) Adjustable margins. Stack height 50mm Weight 110kg Gjdpez N Silefx Akysbu Efficiency 40 cycles/min Power supply 400V This is the currently produced model.

Condition: used, functionality: fully functional, Muller Martini Pony 246 Number of binding clamps: 5 Maximum production speed: Up to 3,000 cycles per hour Typical production speed: Approximately 1,500–2,500 books per hour Maximum book thickness: Up to approximately 40 mm Minimum book thickness: Approximately 3 mm Binding method: Hot-melt adhesive perfect binding Gbsdpez Dh I Esfx Akyju Book Format: Maximum book size: Approximately 400 × 240 mm Minimum book size: Approximately 140 × 100 mm Spine preparation: Milling and roughening station Features and Equipment: 5 binding clamps Automatic cover feeder Hot-melt spine gluing system Hot-melt side gluing system Milling and spine roughening unit Cover scoring/creasing station Book delivery conveyor Waste removal and dust extraction system (configuration dependent) Glue system: Hot-melt adhesive.

Condition: like new (used), functionality: fully functional, A very nice book press is for sale. Godpfx Aozwga Nokyebu Brand: Mahez, size 485 x 560 mm. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it onto a truck or container. Please request a price including transport (within the Netherlands). Best regards, Henk Hoos

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Gedpfx Asz N Shujkyobu Automatic eyelet feeding.

Condition: used, Year of construction: 1982, Kolbus DA 780 Gbjdoxz D Ncspfx Akyeu Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Machine weight: ~2.5 – 3 tons

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Plockmatic PBM500e’ brochure-making accessory Item for sale: 1 x Plockmatic PBM500e with the following features: Gsdpfxoz Etqhj Akyobu incl. Book Fold incl. PBM-TR trimmer Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.In this listing, you are purchasing a second-hand ‘Plockmatic PBM500e’ brochure-making accessory Item for sale: 1 x Plockmatic PBM500e with the following features: incl. Book Fold incl. PBM-TR trimmer Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, KOLBUS DA 260 Gbjdpoz Ebbnsfx Akyou Case Making Machine Manufacturer Kolbus GmbH & Co KG, Rahden, Germany Production Year 2015 • Max. speed 40 cycles/min • Spine strip (roll) max. 500 mm • Mounting diameter 60 mm • • Production options: • • Book cover: • Open format min. 140 x 205 mm • Max. 390 x 670 mm • Hinge width 4 – 18 mm • Outer insert width 14 – 120 mm • Closed hinge width 8 – 15 mm • • Canvas in the spine of a book • Width 223 – 708 mm • Height 130 – 428 mm • Cover boards: • Thickness 1 – 4 mm • Width 95 – 328 mm • Height 140 – 390 mm • Spine board: • Thickness 1 – 4 mm • Width 6 – 90 mm • Spine strip (roll) • Thickness 0.3 – 0.6 mm • Width 6 – 90 mm • Availability immediately Sale Reason production reduction Condition of the Machine very good condition, well maintained, worn out according to its agecan be seen running

Condition: refurbished (used), functionality: fully functional, Year of construction: 1992, High-pressure pump/high-pressure plunger pump/channel flushing pump Uraca KD716-G (with integrated gearbox i=3.32) DATA Plunger: d65 mm (optionally d55 or d60 mm) Operating pressure: 140 bar (optionally 200 or 170 bar) Flow rate: 144 - 370 l/min (depending on the drive power/drive speed, see data sheet) Gear ratio: i=3.32 Gearbox shaft: 46 mm Drive: left or right with engine cooler Gbodpfx Akoz Hzxvsysu DESCRIPTION Condition: fully reconditioned (pump head including plunger and valves completely new, all bearings and seals, etc. new), ready for use and in very good condition.