Used Boiler Wood Fired for sale (7,811)

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150°C or just water Max. thermal output up to 850 kW Ljdpey Dfd Nsfx Afaerk Suitable for dry material

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories Lrsdpfjxmrwfex Afaok ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, Fröling Turbomatic TMC – Automatic Wood Chip Boiler (35–110 kW) Multiple Fröling Turbomatic TMC units in stock – immediately available. Output (kW) – Price (net, excl. VAT) 35 kW – €5,000 55 kW – €6,000 70 kW – €7,000 85 kW – €8,000 110 kW – €10,000 The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings, and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feed auger (dosing screw), which automatically transports the fuel directly into the combustion chamber. The complete discharge system (fuel extraction from the storage room) is generally not included and is available separately. 👉 For the 110 kW model, the complete discharge system is already included in the price. ⸻ Technical highlights: • Lambda-controlled combustion for optimal efficiency and low emissions • Automatic grate with shaking and tilting function for clean combustion • Multi-pass heat exchanger with automatic cleaning (WOS system) • Automatic ash removal from combustion chamber and heat exchanger • Induced draft fan for maximum operational safety • Large combustion chamber with refractory lining for high temperatures and stable combustion ⸻ Further advantages: • Modular system – easy installation • Individual drives for all components → high reliability • Adaptable to various fuels and moisture levels ⸻ TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps Lodpfxjwakktj Afaork • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Latest offers: Much of our current stock can be found on our website: topheatingsystems.com We also have additional equipment that is not yet advertised. 📅 Viewing: Warehouse visits are possible by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Ljdpfox U Exusx Afajrk

Condition: ready for operation (used), Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used. Ljdpok S Eh Sefx Afaerk

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. Ledpfx Aoyf U R Hofasrk The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Here for sale is a Werz wood-fired baking oven. The oven is still new and has not been in use. Oven is sold together with trailer. Please contact us if you are interested. Lrodpfx Asvbcu Ijfask

Condition: used, Year of construction: 2010, 212 USED WSB Wood-fired, Pellet-fired Bakery Oven. Year of manufacture: 2010. Ledpexqg Ndjfx Afajrk TECHNICAL DATA: - Number of chambers: 2, - Ceramic-lined baking chamber, - Pellet hopper: Capacity: approx. 300 L. EXTERNAL DIMENSIONS (in cm): - Width 300, - Depth 400 (including burners), - Height 270. CHAMBER DIMENSIONS (in cm): - Width 180, - Depth 200. EQUIPMENT: - 4 pellet burners, 2 per baking chamber. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. - Boiler type: gasification - Output: 110 kW Lodsxa Evbjpfx Afaerk - Year of manufacture: 2010 - In operation since: 2010 - Fuel feeding: automatic, with screw conveyor

Condition: new, - Metallic finish - Fuel type: Wood or Gas - NP:6317772 - Internal dimensions: 1000x1000mm - External dimensions: 1400x1500mm - Opening: 550x280mm - Total weight kg: 1100 Ledpfjw Emm Iox Afaerk - Smoke exhaust pipe (Ø) cm: 20 - Pizza capacity (Ø 28/30cm): 4/5 Gas burner available as an option

Condition: good (used), The scope of delivery includes: 02x shelf stand, used Material color: sendzimir galvanized upright profile: 85 x 75 x 2,00 mm upright height: 1.455 / 1.300 mm upright depth: 1.100 mm 04x shelf traverse, used material color: orange box profile: 120 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized 03x wire grating, new material color: sendzimir galvanized Execution: mounted shelf gratings, canted on both sides depth: (bearing bar direction) approx. 1.125 mm for upright depth: approx. 1.100 mm clear width: approx. 965 mm width: approx. 885 mm crossbar support: approx. 65 mm mesh width: approx. 95 x 45 mm material thickness wire: approx. 4,5 mm maximum loadable up to 800 kg with evenly distributed load 03x Trapezoidal sheet, II. choice Color outside: RAL 8012 red brown Color inside: similar to gray-white Sheet length: 1.500 mm Panel width: 1.075 mm Cover width: 1.035 mm Profile: 35 / 207 01x verge angle, new length: 3.000 mm Material color: RAL 8012 red brown size: 100 x 100 mm thickness: 0,75 mm Finish: 90° folded Lodpfxodvgxie Afajrk 25x screws 5,5 x 40 mm A2 max. drilling capacity: 13 mm with 16 mm sealing washer, drill point u. Approval ETA-13/0183 06x screws, 4,8 x 20 mm galvanized, self-tapping for wooden substructure Technical data of the firewood shelter: Total width: approx. 2.900 mm total depth: approx. 1.515 mm total height: approx. 1.535 mm volume to be stored: approx. 3,15 m³ Information: The pictures are sample pictures for clarification of the construction. to illustrate the construction. The material color of the stands and trusses shown may differ. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Year of construction: 1984, BIG Sale!! Woodchip boiler, Mawera FU300 R, Full automatic working, with screw conveyor, ash removal filter, fan, steering, documentation, etc. Lsdpfsd Da Nnjx Afajrk Visit: anytime possible in Hungary. Already dismountled!

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Lsdpfx Aew Uf S Hsfajrk

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y Ledpfeyw I Hmjx Afajrk The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: new, Year of construction: 2025, planing width: 5,100 mm, overall weight: 1,055 kg, power of feed motor: 75 W, spindle speed (min.): 6,000 rpm, Wood-Mizer MP365 High-performance four-sided planer/moulder with additional fifth head Brand new machine Processing parameters: Four-sided: Planing width: 15–350 mm Planing height: 10–160 mm Two-sided: Planing width: 10–410 mm Planing height: 10–230 mm Single-sided: Planing width: 10–510 mm Planing height: 10–230 mm Feed speed: 3–15 m/min Technical parameters: Top spindle – straight knives 510 mm, 2 pcs, 6000 rpm Bottom spindle – straight knives 410 mm, 2 pcs, 6000 rpm Side spindles – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max side head height 160 mm Fifth spindle – 30 mm spindle, 3000/6000/9000 rpm, 270° tilt angle, max head height 130 mm Motors: Ljdjy Emxkopfx Afasrk Top spindle – 5.5 kW Bottom spindle – 4 kW Side spindles – 3 kW Fifth spindle – 3 kW Feed – 0.75 kW Total motor power: 19.25 kW 3 phase, 400 V, 50 Hz, 31.4 A Dust extraction ports – 4×100 mm, 1×125 mm Weight: 1055 kg Year of manufacture: 2025

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg Lredpeyrdg Defx Afajk

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Lsdjvzub Hepfx Afajrk Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist. Ledpfx Afsyz Ia Isaerk

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Lodpfeyr Dfaex Afajrk Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: used, Year of construction: 2022, Wood-Mizer MP260 Compact and versatile four-sided planer/moulder Machine from the Wood-Mizer machine exchange program, inspected and factory set. Excellent technical condition, long tables, new side pressure rollers, polyurethane feed roller, sharp knives. Machining parameters: Four-sided: Planing width: 40–260 mm Planing height: 10–100 mm Two-sided: Planing width: 10–300 mm Planing height: 10–220 mm Single-sided: Ljdpfxoyr Dcrj Afaerk Planing width: 10–410 mm Planing height: 10–220 mm Feed speed adjustable: 2–11 m/min Technical specifications: Top shaft – straight knives 410 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 300 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max. side head height – 100 mm Motors: Top shaft – 3 kW Bottom shaft – 3 kW Side shafts – 3 kW Feed – 0.37 kW 3-phase, 400 V, 50 Hz, 27.45 A Extraction ports – 3 x 100 mm, 1 x 125 mm Weight: 440 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Planer-Moulder Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Working parameters: double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Weight 370 kg Ledeyr Dclopfx Afaerk

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MP180 Universal planer – jointer, double-sided planer, spindle moulder. Machine used for training and demonstration purposes, fully tested and factory set. Processing parameters: Double-sided: planing width: 10-300mm planing height: 10-100mm Single-sided: planing width: 10-400mm planing height: 250mm Feed speed steplessly adjustable 2-11 m/min Technical specifications: Upper shaft – straight knives 410mm, 2 pcs, 6000 rpm Side shaft – spindle 30mm, straight knives 50mm, 2 pcs, 6000 rpm Motors: Upper shaft – 4kW Side shaft – 3kW Feed – 0.37kW 3 phase, 400 V, 50 Hz, 16 A Ljdpfx Ajyr Dcfjfasrk Extraction ports – 2x 100mm Weight 362kg

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information Lodpfxjyr Dawj Afaork • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products Lredoq Igyvepfx Afaok - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, EG300EH25S-EMR Lrsdpfx Afsyynq Roask Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box