Used Boiler Wood Fired for sale (7,350)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Bruks Wood Chipper Year of manufacture: 2001 Technical condition: very good – after overhaul Technical data: - main engine power: 110 kW - Infeed opening: 700 / 400 mm Kjdpjyalfkjfx Ah Nsdg - Rotor: 3 knives - Feed rollers: 12 units – 9 lower / 3 upper - Vibrating infeed conveyor: 40 m - Inclined discharge conveyor: 13 m

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Kdedeyalblopfx Ah Nsg

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation No PLC installed yet Partially overhauled New rotor bearings Kdjdpfx Aewv Hmvsh Njg

Year of construction: 2020, operating hours: 1,050 h, condition: used, Serial number: 2292xxxx Please contact ATS Norway for more information Kedpfex Dg Utox Ah Nodg Please provide reference number upon request: 21978 Specifications: 2020 model Hours: approx. 1050 Chassis (see photos) Remote control Shaft set for concrete and wood Includes equipment for installing a magnetic belt AdBlue is disconnected Delivery by agreement Description:2020 Arjes Evo waste shredder.One shaft set for wood and one for concrete.See video.Delivery by agreement. Hours: 1050 Own weight: 11 Model: Evo Avfallskvern. For betong og treverk! SE VIDEO.

Year of construction: 2017, condition: used, Serial number: 17090xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22089 Description: We have a 2017 Magsi Rateau wood gripper w/s70 mount for sale. Everything works as it should, according to the owner. Ready for delivery Ksdjx I U Uxopfx Ah Nsdg Model: Rateau wood griper m/s70 feste

Condition: used, machine/vehicle number: XLER6X2000512xxxx, mileage: 1,405,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Kdodpfswqwlrox Ah Nog Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: used, Year of construction: 2016, Serial number: Serienr Bruks: 8060048,Serienr cmt:23008, Serienr palfinger: 151xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21792 Specifications: 2016 model 3135 hours Weight: 16000 kg Max diameter: 50 cm Good capacity Engine: scania dc13 385A Eu stage IV 368 kW 500 hp Kdodjxwkmaspfx Ah Nsg 2 full length knives Service taken care of by owner Timber crane Slewing ring Knives Counterknife Reach 20 mp crane Timber clip Support leg CMT hook frame Delivery by appointment   Description: We have a 2016 Bruks 806st Bio wood grinder w/ cmt hook frame and epsilon palfinger m120l97 t mmer Crane for sale. It has good capacity and can chop logs up to 50 cm in diameter. Services have been taken by the owner himself. Everything should work as it should according to the owner. Delivery by arrangement. Own weight: 16000 Model: 806st Bio tre kverner m/ Epsilon palfinger m120l97 tømmerkrane

Condition: used, Year of construction: 2017, Serial number: 561706xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21791 Specifications: 2017 model 1646 Hours Weight 2000 kg Takes logs up to 19 cm About 50 hp Ksdpfx Ahjxwkmgo Nodg Kubota engine 18.5 kW Raise and lower Function Ready for delivery   Description. Jensen A540 spider wood chipper works as it should according to the owner. It has a raise and lower function that allows you to maneuver smoothly in the terrain. It takes logs up to 19 cm in diameter. The machine is ready for delivery. Own weight: 2000 Model: A540 spider flishogger m/hydraulisk hev og senk funksjon

Condition: used, Year of construction: 2016, operating hours: 816 h, 2016 | Dücker HM 160 Wood Chipper | Used Shredder | 816 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39536 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Kodsx Tbnpopfx Ah Nodg 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: repair required (used), Old Bruks chipper drum and partly body. Good project for building - re-chipper for small pellet or briquet factory. Kdodoq E N U Uepfx Ah Neg

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, overall weight: 1,000 kg, Disc chipper with 2 knives. Tractor PTO driven. Kdedsx Dzdijpfx Ah Njg

Condition: new, color: red, Flip-up Sprinklers - 3 inch Kdodpfx Aoyagxleh Nsg Condition: New

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, unladen weight: 7,580 kg, gross weight: 39,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air, ABS, EBS, body year: 2005, sliding roof, axle type: BPW = Further Information = General Information Cab: Day Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm Axle 3: Tyre tread left: 7 mm; Tyre tread right: 8 mm Weights Unladen weight: 7,580 kg Payload: 31,420 kg Gross Vehicle Weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance Kjdpfx Ahsx S Uzao Nedg APK (Vehicle Inspection): valid until 09.2026 Condition General condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various model years and price classes. Why buy at Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognisable quality • Good price • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognisable quality’ • And more.... Please visit our website for special offers and full stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, mileage: 93,050 km, power: 135 kW (183.55 HP), first registration: 07/2009, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro4, number of seats: 4, total length: 6,225 mm, total width: 2,130 mm, total height: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Internal vehicle number: 7463B ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany Over 400 vehicles immediately available at all times Widest selection – Best price More than 1,000 satisfied customers per year – Top customer reviews WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition and very well maintained First owner German vehicle Full service history exclusively with Mercedes-Benz Automatic transmission Ambulance (RTW) Two additional seats in the rear Radio units Electronic siren/Martin horn Blue lights Perimeter lighting Refrigerated box Thermo box Gas cylinder connection 230 V sockets Ceiling lighting Heat exchanger Rear air conditioning Various cabinets and shelves Rear sunroof Rear step and step under sliding door Emergency start Fuse box Vehicle Equipment: Air conditioning Auxiliary heater Radio/CD ---- Special Equipment: * Head-shoulder airbag (thorax bag), driver/passenger side * Head-shoulder airbag (thorax bag), driver side * 1-DIN compartment in front under headliner * Passenger airbag * Audio navigation system: Autopilot System APS COMAND with TMC interface * Exhaust before rear axle, left * Outside temperature display * Additional (reinforced) battery * Single-pole battery disconnect switch * Roof control unit with reading spots, driver/passenger side * Entrance lighting * 180 A alternator * Additional main key * Regulated air conditioning (Tempmatik) * Head airbag system (window bag) * Steering wheel (column mechanically adjustable) * Steering wheel with multifunction including on-board computer * Fog lights * Programmable special module * Full-size spare wheel (235/65 R16) * Spare wheel holder under frame end incl. jack * Acoustic reverse warning (external warning signal) * Interior rearview mirror * Rear wall with window * Front mud flaps * Reinforced rear stabilizer * Reinforced front stabilizer * Fuel sender for auxiliary heater * Relay for additional battery Kjdpfxovzb Awe Ah Nodg * Rear wall cladding * AGM battery 95 Ah * Mobile phone connectivity preparation * Reinforced front axle * Thermal insulation glazing (windshield with upper band filter) * Additional heater (hot water) Standard Equipment: Adaptive brake light, driver’s airbag, anti-lock braking system (ABS), drive type: rear-wheel drive, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated turn indicators, 100 Ah battery, brake assist, braking system with ABS+ASR, roof lining in cab, electronic stability program (ESP), two electric windows, automatic transmission (5-speed), lockable glove box, body/configuration: standard platform, main fuel tank: 75 liters, headlight leveling control, truck registration, engine: 3.0L – 135 kW CDI, particulate filter, wheelbase 3665 mm, low emissions according to Euro 4 Gr. III, power steering, cab seats: passenger seat with armrest, cab seats: driver’s seat with armrest, service interval indicator Assyst, immobilizer, central locking with remote control, permitted total weight 5.00 t, twin tires on 2nd/rear axle. ----New roadworthiness (HU/AU) upon request. ----Warranty & "TÜV Profi Check" naturally available from us! We are also happy to take your vehicle in part-exchange! We can create a tailored finance or leasing offer for you! No down payment, everyone qualifies.

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types CNC Wood Machining Kdodpfx Aex S Si Ioh Nsg

Condition: good (used), Year of construction: 2011, Slow-speed shredder with moving floor and dual-sided drive Rotor width: 1000 mm, diameter: 300 mm, fitted with 27 knives Kjdpfxeyab S Ts Ah Nedg 2 x 18.5 kW motors Hydraulics: 2.2 kW Screen perforation: 2.2 kW With discharge auger Control system: Siemens S7

Condition: excellent (used), functionality: fully functional, Catalogue number 7442 TECHNICAL DATA - Infeed width: 410mm - Infeed height: 120mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 60x60mm - Top: toothed feed shaft - Bottom: 2 toothed feed shafts - Feeding belt length: 4100mm - Feeding belt width: 400mm - Auto-reverse - Main motor: 30kW - Feed motor: 2×1.5kW - Machine dimensions (L/W/H): 2300x1550x1500mm - Feeder dimensions (L/W/H): 4400x500x1000mm - Weight: 2135kg ADVANTAGES Ksdpex S Nfyofx Ah Nsdg – Made in Poland – Auto-reverse (adjustable) – Equipped with conveyor belt – DTR documentation – used shredder, very good condition Net price: 76,900 PLN Net price: 18,300 EUR based on 4.2 EUR rate (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder Kdodpfx Asx S Nfteh Nog - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm Kedpfx Ajx S Nbueh Njdg - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900 mm Infeed height: 300 mm Shaft width: 1030 mm Shaft diameter: 700 mm Knife length: 1030 mm Number of knives: 3 pcs Screen dimensions: 70x70 mm Below: 2 toothed feed shafts Lower shaft motor: 7.5 kW Above: 2 toothed feed shafts Upper shaft motor: 7.5 kW Belt conveyor feeder Redler chain conveyor 5600 mm + 10600 mm, 2.2 kW Feeder belt width: 800 mm Main motor: 90 kW Reverse function Overall machine dimensions (L/W/H): 3300x3100x1700 mm Base for chipper dimensions: 3300x2080x1940 mm Feeder / Redler dimensions (L/W/H): 5600x900x1000 mm + 10600x1050x1600 mm Base for feeder belt dimensions: 5100x1300x2520 mm Total weight approx.: 16,000 kg ADVANTAGES – German-made – Redler-type chain conveyor equipped with scrapers – Reverse function Kdodpfx Aex S Nawjh Neg – DTR technical documentation – Used chipper, in very good condition Net price: 258,900 PLN Net price: 61,640 EUR (according to exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm Ksdpfxsx S I Umo Ah Nodg - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made Kdodpex S Iwhefx Ah Nsg – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: used, Year of construction: 2020, operating hours: 10,150 h, functionality: fully functional, machine/vehicle number: W09D20432L1A65405, power: 515 kW (700.20 HP), first registration: 03/2021, fuel type: diesel, color: green, fuel: diesel, Equipment: additional headlights, air conditioning, all wheel drive, cable winch, compressor, cooling unit, crane, fog lights, hydraulics, parking heater, ALBACH DIAMANT 2000 Kdjdpfxsw Uddnj Ah Nsg W09D20432L1A65405 Registration year: 03.2021 Engine: VOLVO PENTA 565kW 760hp Rotor: Generation 6 (12-knifes), 120mm sieve Blower: TYPE 4 Accelerator: Generation 2 Crane: Type S110 F, Epsilon Equipped: DAFO vehicle fire suppression system Engine hours: 10152 h Rotor hours: 4405 h Full maintenance and repair history. Technically clean machine, ready for work w/o investments.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Hello, Kdedpoxr Rtpofx Ah Nog The best equipment offer includes two automatic lathes. The equipment is barely used, practically new. It comes with a set of knives in different sizes from 15 to 50mm. The machines are of different sizes and production speeds. The small lathe machines parts with a diameter of 10-30mm, and the large one with a diameter of 20-55mm. They have not been used at all in recent years. The equipment is in working condition and supplied in full sets. Please request an additional video or photo if required. I can additionally offer a round rod making machine in the package, which manufactures raw material (round rod) for wood turning lathes, at a very, very low price. Best regards, Edijs Paleys

Condition: used, mileage: 39,581 km, first registration: 04/1993, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, number of seats: 3, total length: 1,000 mm, total height: 1,000 mm, Year of construction: 1993, Damage: none Kjdpfewixahox Ah Nsdg = Company Information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for buying and selling used buses and features a spacious parking area that serves as a showroom. We always have a wide selection of buses in stock across all brands, capacities, models, and price ranges. We can find the right touring, school, or city bus tailored to your requirements and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon–Fri: 08:30–12:00, 12:30–17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.