Used Board Cutter for sale (6,879)

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Pjdsv Igghepfx Ah Hjgg Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Podpfjv Igg Iex Ah Hjgg Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Psdpfx Aswdutmsh Hjgg Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: refurbished (used), Krämer + Grebe 200L cutter The machine is completely overhauled by us. All wear parts have been replaced on the machine. The electrics on the machine is new! Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information contained and prices are not guaranteed. A warranty and / or liability is excluded. Psdpfop Aub Iex Ah Hogg Until full payment, the machine remains our property.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6035 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m Pgjdethh Nxspfx Ah Hjg - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, mileage: 7,866 km, power: 270 kW (367.10 HP), first registration: 05/2025, axle configuration: 2 axles, next inspection (TÜV): 05/2026, gearing type: automatic, Year of construction: 2022, Equipment: air conditioning, electronic stability program (ESP), FA XD 370 ZIKUN Swing-Board Body CRYSTAL WHITE Mechanical cab suspension Day Cab DAF Corner View Handles and trim: Black, side panels: cab color LED daytime running lights Chassis configuration front: floor plate Aero Central locking Windshield with sun protection film Beacon preparation on front of cab LED headlights, cornering and fog lights Adjustable roof spoiler for Day Cab Passenger seat: cinema-type with fabric upholstery Cab interior trim: Hexagon Cab wall trim: fabric Dashboard version: Vision Driver's seat, fixed base Interior trim color scheme: Luxury Passenger seat, fixed base Central storage compartment Steering wheel with silver accents Roof hatch with electric operation Driver's seat: Luxury Air Door panel: loosely woven fabric Automatic climate control for cab Coolbox or refrigerator Driver's seat armrest Dashboard table ECAS remote control with extended functions Auxiliary heater with waste heat pump and timer Adaptive cruise control with FCW and AEBS-3 DAF Connect FMS interface prepared Antennas: DAB-ready radio, 2x mobile, GNSS Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, Version G2V2 DAF Infotainment Luxury Plus, luxury speakers Electronic stability control (VSC) Lane departure warning system Reverse warning system Stabilink rear axle suspension Rear: Air suspension SR1344 Front axle 1: 6,300 kg, load index 148 Rear axle 1: 11,600 kg, load index 145 Rear axle capacity 13.00 t One ride height position, standard height Front air suspension: medium Front: 8.00 t, air suspension, 161 N Silver grey wheel trims Front axle(s): 315/70 R22.5 Driven rear axle(s): 315/70 R22.5 Steel disc wheels, silver gray Standard transport, full version Manoeuvring mode Idle cut-off automatic, 5 minutes Automated gearbox, TraXon, 12 gears Automated transmission with manual mode – full version Traction control (ASR) Emission standard Euro 6 Rear axle ratio 2.47 Mechanical differential lock 12-speed TraXon transmission 12TX2010 DD, 16.69-1.00 MX-11 engine, 270 kW/367 hp, cab emblem: 370 Compressor 2 cylinder without clutch Drive rear axle with disc brakes Pneumatic control for parking brake Parking brake assistant MX engine brake Front underrun protection Exhaust pipe horizontal, low EAS unit right, horizontal with 45-l AdBlue tank left Pedpfx Asxtr N Ijh Hegg 340l fuel tank Splash guard Steel air tanks Wheelbase 5.10 m / rear overhang 2.75 m Side members 260/7.0 mm, continuous inner reinforcement Prepared for drawbar use, type plate, max. GCW Pneumatic connection for trailer, turntable coupling Cross member D137 + Rockinger coupling D130 Electrical connection for trailer, 24 V/15-pin Side marker lights Tail lift application Generator 110 A, batteries 2 x 175 Ah Front air intake ZIKUN Swing-Board I-Body Technical data: Through-loading length: 6,650 mm Cargo length: 6,800 mm Loading width at rear portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm Internal through-loading height: 2,100 mm Approx. loading height: 1,177 mm Approx. overall height unladen: 3,479 mm Floor: Made of 24 mm thick vehicle construction panels UN folding swing mechanism. Upper folding side panels made of 25 mm aluminium composite panels with center locking Roof: Fixed roof Powder-coated in RAL 9010 pure white Bumper protection: Welded steel bumper strips on both sides as impact protection. Painting: The entire body sandblasted, primed, and painted in a single color or powder

Condition: reconditioned (used), functionality: fully functional, Powerful three-phase motors and easy adjustment of angles and milling depths make the WSK8-3 the optimal machine for your custom production. • Automatic start when the control levers are operated Pgsdpfsx U Ampox Ah Hsg • Upper milling unit continuously swivels up to 45° • Simple setting of units using scales and stops • Easy adjustment to various profile systems

Condition: excellent (used), AFT Sandwich cutter Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph Pgjdpfxofv Spnj Ah Hsg

Condition: good (used), D and D Stainless cutter Podpfxorwz I Ao Ah Hegg Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph

Condition: excellent (used), NNP Cheese block cutter Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h, Pjdpfxewtilpe Ah Hogg

Condition: good (used), Nowicki KN1-125 Bowl cutter Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph Pgjdpfx Ajnp Nc Ish Hog

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, pass-through width: 250 mm, overall weight: 650 kg, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. Pedpfxjxhc Tme Ah Hogg For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: used, Year of construction: 2017, Board dimensions min./max. 265–1,800 x 350–1,800 mm, position detection, double-sheet control, 2 robots, manufacturer Kuka, type KR100 R3500 press, year 2017, KRC4 control unit, handheld control terminal, acceleration conveyors, Washing unit Wandres EVO, year 2005, oiling station, manufacturer Raziol FGP 2001, year 2021 Pgedpfox R D Umox Ah Hog +++ Attention: This item is part of an online auction! +++

Year of construction: 1996, condition: used, Manufacturer: Cruells Cruells Model: C30 Year: 1996 Type : cutter Pedpox R Aufefx Ah Hjgg   Bowl volume: 30 L Number of knives : 3 Weight : 210 Kg Hinged lid

Condition: used, operating hours: 555 h, Laska Bowl Cutter -Type: KU 200 V DC -Power: 103 kW Pgsdpfjx Up Itox Ah Hsg -Bowl capacity: 200 L -Knife speed control (up to 4000 rpm) -Bowl speed control (4-14 rpm) -Made of stainless steel -With loading -With technical documentation -With vacuum -Weight: 4300 kg -Power supply: 400V 50Hz -External dimensions: 3850 x 2650 x 1750 mm -Number of hours worked: 555 -Condition: Used in very good condition, ready to work

Condition: used, Year of construction: 2000, total width: 2,000 mm, total length: 6,500 mm, total height: 2,000 mm, Empty weight: 2.500 kg Price: On request Steel/stainless steel/aluminum plasma capacity up to 12 mm. Hypertherm Powermax 1100, Harris Autogenous propane 3-200 mm. CR-electronic cutting/nesting software. Pgedpsxrzl Ajfx Ah Hog - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: OXY031200 - Control: CNC - Travel X: 4000mm - Travel Y: 2000mm - Resonator type: Hypertherm Powermax 1100 - Max. sheet thickness: 12mm - Transport dimensions: 6500mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 4 pieces -Type: Mod.2,25 R1 EW 20° see photos -Hole: Ø 32 mm Pgsdsv D Dt Rjpfx Ah Hsg -Price/Delivery: complete -Transport dimensions: 170/170/H110 mm -Total weight: 10.6 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards Pgodpfjnah Drox Ah Hog -Manufacturer: Gossen, control plug-in cards circuit boards -Switching regulator card: Constant S83 S5 EU 12 -Plug-in card: 7204-6072C0 -Temperature controller card: Gossen Pantatherm DS 4 4400-S 8 pieces -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 5.2 kg

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board Pgedsrc Ilgopfx Ah Hjg -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Condition: used, CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Baldor, circuit board electronic module circuit board from press brake HACO PPES 30135 -Type: TEM 060-06-01-1 -Individual components: see photos -Dimensions: 165/100/H250 mm -Weight: 0.9 kg Podpfx Ahord Adqj Hsgg

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm Pgedpfsdp Dvtsx Ah Hsg -Weight: 100 kg

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters Pgedegd Uv Dopfx Ah Heg -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete Pgjdpfsgfcnksx Ah Hsg -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Condition: used, Cutting stock set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -for square up to: 34 mm Podpod R Urwefx Ah Hegg -Price: per piece -Quantity: 2 pieces -Dimensions: 1005/85/H35 mm -Weight: 4.7kg

Condition: good (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer -for diameters: 20 - 60 mm -Recording: MK 3 Podpfx Ahsd Sdl Is Hjgg -Quantity: 1 piece internal chamfer cutter available -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece