Used Board Cutter for sale (10,794)

Condition: like new (used), Year of construction: 1987, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Technical data: Tsdpfxeu R D I So Adnsf >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts plan About the machine : Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, lockboxcutter unit: yes pusher hole unit: yes Tedpfxexu Dhfe Adnjf face milling: yes

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Combo - contour cutter//cutting line: TECNODINAMICA mod. KAOBAND -Cutting line for blocks of size 4800x1200x1200 (finished block size) - Tipper - Guillotine for sectioning up to 2400 mm for the pantograph - Automatic rotation of the cut block for contour cutter/pantograph Tedpfxouct Szj Adnsf - Horizontal cutting with automatic wire positioning - Pantograph integrated in the first station with automatic wire positioning. - Automatic lower scrap miling - Side cutting with manual wire positioning - Down cutter with manual wire positioning - Safety fences with micro switchs - PLC with INPUT/OUTPUT cards connected to the PC - Machine in excellent condition - Total length approximately 37m

Condition: like new (used), Production capacity: 3000kg/h Total power: 11kw material channel width: 540mm Material channel height: 240mm Cylinder stroke: 700mm Gas source pressure: 4-6 kg/cm 2 Processing raw material meat specifications: 700 × 520 × 200 (mm) Weight: 800kg Tjdsxuliwspfx Adnef External dimensions: 2150 × 1030 × 1220 (mm)

Condition: new, Year of construction: 2024, Features: • Constructed from 304 stainless steel, ensuring robust stability. • Equipped with a food-grade conveyor belt, offering a high safety factor. • Frequency control allows for adjustable cutting sizes. • High capacity, capable of processing up to 1000 kg per hour. Leafy vegetable cutters provide numerous benefits in food processing. They are capable of swiftly and precisely cutting large quantities of leafy greens, such as lettuce, spinach, and cabbage, which greatly enhances efficiency and reduces labor. Additionally, they minimize direct human contact during operation, lowering contamination risks and meeting hygiene standards, making them particularly suitable for the food processing industry. Advantages: • High Efficiency: Can process 1000-1500 kg of leafy vegetables per hour, greatly boosting production efficiency. • Adjustable Cutting Length: The cutting length can be adjusted between 1 and 50 mm to meet various requirements. • Compact Design: With dimensions of 1620 x 680 x 1240 mm, the machine is space-efficient and fits well in different production settings. • Energy Efficient: Consumes only 1.5 kW of power, leading to low energy costs and operational expenses. • Wide Voltage Compatibility: Supports 220V and 1380V, making it adaptable to different regional electrical standards. Application Fields: • Food Processing Plants: Perfect for large-scale leafy vegetable cutting, improving production efficiency. • Catering Industry: Ideal for restaurants and hotels requiring bulk vegetable cutting. • Agricultural Cooperatives: Helps farmers with primary vegetable processing, adding value to their produce. • Supermarkets and Fresh Markets: Suitable for on-site vegetable processing to enhance sales efficiency. Tedpjt Ivamsfx Adnjf

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Todpfxjxwtu Tj Adnef Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical and horizontal quill - SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system Tedpfxexu E R Ij Adnof >> Operating manual, spare parts diagram About the Machine: Offered is a Universal Milling Machine Deckel FP1 in very good condition in light grey. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. In this newer FP1 model, the feed is infinitely variable in all three axes; in addition, rapid traverse is available in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can input dimensions that the machine will automatically move to. The FP1 was previously used in a training workshop, where it was only operated occasionally. The oil has been changed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to view and test this exceptional machine under power on site. The machine is available immediately.

Year of construction: 2020, condition: excellent (used), Faber SMESAMA Manual disk cutter Todpfx Ajxuku Esdnef 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph

Condition: excellent (used), machine/vehicle number: 511.1012.471, Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: Todpfx Adsxugxtjnsf ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Condition: like new (used), Bowl cutter Manufacturer: Seydelmann adjustable knife speeds 2 mixing speed 2 separate bowl speeds Completely made of special stainless steel 200 liters bowl volume made of stainless steel Dimensios: 300x250x200cm Power: 110 kW Tjdpjxulikefx Adnjf Net weight: 2880 kg

Condition: used, Year of construction: 1982, functionality: fully functional, HECKLER & KOCH - AM 442 Offer Details Stock number: 1039-9384 Machine type: Universal Tool Milling Machine Manufacturer: HECKLER & KOCH Model: AM 442 Year of manufacture: 1982 Control: conventional Location: D-59302 Oelde Country of origin: Germany Delivery time: by arrangement Freight terms: ex site Additional information: Universal Tool Milling Machine HECKLER & KOCH - AM 442 WE OFFER YOU: - workshop-tested machines - loaded onto truck free of charge - NO auction fees - delivery possible (at additional cost) - unloading and commissioning (at additional cost) Technical Details X-travel: 390 mm y-travel: 330 mm z-travel: 380 mm Control: conventional Table clamping surface: 850 x 255 mm Max. table load: 200 kg T-slot width: 12 mm H8 Number of T-slots: 5 T-slot spacing: 45 mm Spindle speed range (milling): 63 - 2,800 rpm Number of gear steps: 12 positions Tsdext N Rvepfx Adnjf Feed: 0 - 1,500 mm/min Tool holder: SK 40 Rapid traverse: 1,500 mm/min Machine weight approx.: 1.9 t Space requirement approx.: 2.0 x 2.5 x 2.8 m

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Tedpfx Adsxt N Izsnof Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures Tsdpewrnf Eofx Adnsf About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: used, Used STEPHAN stainless steel cutter type UMM/SK40E PILOTE-No. 4418598. Capacity 40 litre. Stainless steel tilting vessel with double jacket. Driven by a Hp 10 - Rpm 1500/3000 - 380 volt motor. -Electric control panel - scraper with motor Tsdpoxt Eizjfx Adnjf

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Tsdpouhm Rbefx Adnjf Shears very good condition.

Condition: new, functionality: fully functional, Fabr. Vergnano - 4 pcs pre-grind solid steel gear hobbing cutters EGW 20 new - unused Cutting material - Material MC90 HRC 67+68 Alcrona coating Hob cutter (Ø40x60, bore Ø16, pre-cutter, overlapping) Tedjwb Dfaopfx Adnof Solid steel hob cutter Fabr. Saazor - 6 pcs, cutting material carbide K-grade + TiAlN Carbide cutters with HM K-grade material EGW 20, Mod 0.8 All cutters are new and unused in original packaging Price on request All technical data subject to typographical errors/changes Sale exclusively to EU countries.

Year of construction: 2024, condition: new, Flagship Model of Spica Series CMM Spica 3000 - Simultaneous Three Color Printing: two color printing on the front & 1 Color on the back of the label. Tedogqggnepfx Adnof Double sided printing and ribbon saving function reduce cost and realize more effective printing. Easy design and operation with printing application NiceLabel. Rotary Cutter and Stacker included. NiceLabel Designer Pro - option. Print speed: up to 150 mm per second. Resolution: 300 dpi. print on roll media. CMM ULTRASONIC CUTTER CUC-45 CUC-45 is an optional equipment for Spica Series. Vega series have ultrasonic cutter CUC-45 as an option. It needs to connect both ultrasonic generator and cutter assembly with the care label printer to use Ultrasonic Cutter CUC-45. We recommend CUC-45 to cut double sided label. Generation of fray at the cut edge can be eliminated as the edge is cut precisely by the ultra-sonic cutter.

Condition: like new (used), Year of construction: 2021, Stegherr KSF-mini Cross Bar Milling Machine A video of the machine in operation can be sent upon request. For manufacturing cross bar joints in window or furniture construction. All three machining steps are performed in a single clamping: Tjdpfswkvg Ujx Adnof 1. Milling the upper mitre by moving the milling unit to the rear 2. Sawing the web by swiveling the clamped workpiece 3. Milling the lower mitre by moving the milling unit forward Maximum workpiece cross-section: 56 x 46 mm Pneumatic foot switch for clamping the workpieces Stop ruler with optical reading Milling head with indexable inserts 3 saw blades included Total connected load 400V / 3.3kW (Saw motor 2.2kW, Milling motor 1.1kW) Extraction port: 100 mm Machine in original paint, only used for demonstrations so far. Included in delivery: • On-board tools • Operating manual • CE marking Dimensions approx. 1400 x 700 x 1400 mm (LxWxH). Weight approx. 200 kg. The machine can be demonstrated in our facility by appointment. We only offer machines that are ready for demonstration and available in our warehouse; see "Other offers from this supplier."

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Tsdpfem E T Anex Adnof grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: used, Board sorting / sorting boxes / track wagon sorting consisting of: - Board elevator - Conveyor belt - Spiral roller conveyor - Manual sorting boxes (10 track wagons) Tedpfx Aoxvz N Asdnsf

Condition: new, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, total length: 13,000 mm, total width: 3,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS13030CS MAX Ultra-Large Format Single-Platform Sheet Cutting Machine Smooth and delicate cutting section, burr-free Equipped with bevel cutting head and system High-quality modular drag chain cables Beam safety light curtain Fully automatic grease injection system Tjdpfx Adjv Hnpzjnef

Year of construction: 2025, condition: new, CMM Spica 3000 - Simultaneous Two Color Printing: 1 Color on Face & 1 Color on Back. Double sided printing and ribbon saving function reduce cost and realize more effective printing. Easy design and operation with printing application NiceLabel. Tjdpfxegqkd Hs Adnjf Rotary Cutter and Stacker included. NiceLabel Designer Pro - option. Print speed: up to 150 mm per second. Resolution: 300 dpi. print on roll media. CMM ULTRASONIC CUTTER CUC-45 CUC-45 is an optional equipment for Spica Series. Spica series have ultrasonic cutter CUC-45 as an option. It needs to connect both ultrasonic generator and cutter assembly with the care label printer to use Ultrasonic Cutter CUC-45. We recommend CUC-45 to cut double sided label. Generation of fray at the cut edge can be eliminated as the edge is cut precisely by the ultra-sonic cutter.

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Todspr U Etepfx Adnef Technical data: >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Accessories: >> Swiveling dividing head SK40 >> div. mountings SK40 To the machine : Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: Todpfexu E Nqex Adnjf 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swivel and tilting table (recently overhauled) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Features: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Equipment and Accessories: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are nearly new. The swivel and tilting table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes work easier and more precise. Take advantage of the opportunity to inspect and test the Deckel on-site under power. The machine is immediately available!!! Todsxu E I Hopfx Adnef