Used Bmt for sale (169)

Condition: good (used), machine/vehicle number: 50855459422550, Year of construction: 2020, operating hours: 1,720 h, load capacity: 5,000 kg, lifting height: 5,000 mm, overall weight: 7,000 kg, enginetype: Electric, manufacturer: Toyota Fedsw Rzbcspfx Ab Tsgk

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,310 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,560 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork length: 1,600 mm, empty load weight: 5,200 kg, total length: 2,280 mm, drive type: Elektro, construction width: 1,195 mm, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Fodpfxswiazge Ab Togk Front Tires Type: Superelastic Front Tires Condition: 60 - 80% Rear Tires Type: Superelastic Rear Tires Condition: 0 - 20% Battery Voltage: 80V Battery Ah: 625Ah Battery Year of Manufacture: 2020 Sideshift, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Roof Cover, Windshield, Impulse Control, Full Free Lift,

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,618 h, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 2,590 mm, fork carriage width: 1,070 mm, fork length: 1,200 mm, empty load weight: 6,074 kg, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Fgsdpfjt Ddxpox Ab Tok Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Non Marking Front tires Size: 23x10-12 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 18x7-8 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery Manufacturer: IBG Battery type: PzS Battery year of construction: 2015 Battery condition: 40 - 60% Description: overhead guard, front work lights, BlueSpot rear, rotating beacon, 3rd valve to fork carriage, 3x single lever, code lock load protection grille, sideshift, integrated sideshift 3rd valve, front work lights, safety light, non-creeping tires, interior mirror, rotating beacon, single pedal, LED, seat,

Condition: refurbished (used), Year of construction: 1985, Model BMTH 6.1,50 Year 1985 Technical data: Fgsdpfx Aohgv Rkob Tsk Working length: 6010 mm Bending capacity steel 400 N/mm²: 1,50 mm Bending capacity alu 190 N/mm²: 2,00 mm Stands + Tension arms: 7 pcs Incl. standard control Incl. powered cutter

Condition: new, functionality: fully functional, machine/vehicle number: 9FBMT30T-11479, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,855 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,395 mm, gearing type: automatic, battery capacity: 775 Ah, battery voltage: 80 V, fork carriage width: 1,070 mm, fork length: 1,200 mm, ground clearance: 95 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23x10-12, rear tire type: superelastic tires (black), rear tire size: 18x7-8, overall weight: 5,161 kg, total height: 2,395 mm, total length: 3,549 mm, total width: 1,195 mm, Equipment: lighting, sideshift, Additional equipment: -3+4 valve with hose guide -LED front combination light -LED rear combination light Fsdpfev E I Rpjx Ab Tjgk -Blue LED warning light at the rear -Panoramic mirror -Multifunction display (touchscreen) -Tires: Superelastic Non-Marking -Automatic speed control -Lock for 4th hydraulic function for clamp attachments -Incl. charger 80V / 120A

Condition: as good as new (ex-display), Year of construction: 2024, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, mot. backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar- Fgedpfx Aog Dvpysb Tek

Condition: good (used), machine/vehicle number: 50815121883478, Year of construction: 2022, operating hours: 1,379 h, load capacity: 5,000 kg, lifting height: 7,000 mm, overall weight: 9,000 kg, enginetype: Electric, manufacturer: Toyota Fgodpfx Aew Rzafjb Tok

Year of construction: 2011, condition: ready for operation (used), Segbert FBMT 600-400, year of construction 2011 Fgodpfx Abst Trfvj Tjk

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 9,635 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, fork carriage width: 1,070 mm, fork length: 1,200 mm, empty load weight: 6,426 kg, drive type: Elektro, construction width: 1,210 mm, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm Fodpot Ddxiefx Ab Tegk ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Front tires Type: Non Marking Front tires Size: 23x10-12 Front tires Condition: 40 - 60% Rear tires Type: Non Marking Rear tires Size: 18x7-8 Rear tires Condition: 40 - 60% Battery Volt: 80V Battery Ah: 625Ah Battery Manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2015 Battery condition: 40 - 60% Description: overhead guard, front work lights, BlueSpot front + rear, 3rd + 4th valve to fork carriage, 2x cross lever, dual pedal, Smart Access Sideshift, integrated sideshift 3rd valve, 4th valve, front work lights, safety light, non-creeping tires, interior mirror, joystick, seat,

Condition: new, Year of construction: 2024, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Fedpfx Ajg Avgleb Tegk -images similar-

Condition: good (used), machine/vehicle number: 48653810237782, Year of construction: 2018, operating hours: 2,366 h, load capacity: 3,500 kg, lifting height: 5,000 mm, overall weight: 5,000 kg, enginetype: Electric, manufacturer: Toyota Fodpfxsw Ry I Ie Ab Togk

Condition: new, Year of construction: 2024, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Fsdpsg Avfkjfx Ab Togk -images similar-

Condition: good (used), machine/vehicle number: 48653674643798, Year of construction: 2018, operating hours: 3,137 h, load capacity: 3,000 kg, lifting height: 5,000 mm, overall weight: 5,000 kg, enginetype: Electric, manufacturer: Toyota Fsdpfx Aow Ry Iuob Tjgk

Condition: good (used), machine/vehicle number: 48506487669078, Year of construction: 2018, operating hours: 3,149 h, load capacity: 5,000 kg, lifting height: 5,000 mm, overall weight: 7,000 kg, enginetype: Electric, manufacturer: Toyota Fsdpfxow Ry Hwj Ab Tegk

Condition: good (used), machine/vehicle number: 48506457063766, Year of construction: 2018, operating hours: 3,314 h, load capacity: 3,500 kg, lifting height: 5,000 mm, overall weight: 5,000 kg, enginetype: Electric, manufacturer: Toyota Fgedpfx Abjw Ry Hqj Tek

Condition: as good as new (ex-display), Here you have the opportunity to purchase a straight & as good as new drill/milling head. Technical data: Manufacturer: Eppinger Item number: 7.073.250 DOOSAN article number: R78756A Gear ratio: 1:1 Input speed: maximum 3500 1/min Output speed: maximum 3500 1/min Output torque: maximum 210 Nm Coolant supply: external Alignment: straight Manufacturer's RRP: € 1,791.00 plus VAT. Sale price: € 800.00 plus statutory VAT. Suitable for the following machine tools: DMC DL 60 (M/LM) (BMT85) Doosan PUMA 600/700/800 (M,LM,XLM,XLY) (BMT85) PUMA VT1100 (M) (BMT85) PUMA VT900 (M,M-2SP) (BMT85) Hwacheon VT-950/1150 (BMT85) Hyundai WIA L600/L700/L800 (MA,LMA) (BMT85) LV1100(RM7LM) (BMT85) WT1100 (BMT85) JOHNFORD GT / ST / LC Series (BMT85) SMEC PL 60/70/80 (M/LM) (BMT85) SL 65 (BMT85) Shipping within Germany including packaging € 35.00 net. Shipping outside Germany on request. We welcome inquiries for other original DOOSAN tool holders for your CNC machine tool. We have over 1,000 spare parts in stock for you. Scope of delivery: See photos The sale takes place under exclusion of any liability for material defects. Changes and errors in the technical data and information as well as Fodjfiqbgjpfx Ab Tjgk subject to prior sale!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours Fgjdpfx Abox D U Als Tsk 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws

Year of construction: 2019, operating hours: 11,111 h, condition: ready for operation (used), Control Unit Brand HAAS Model n/a Main Drive Spindle speed range 4000 rpm Additional Equipment Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm Features: Hinged belt chip conveyor, Lathe parts catcher Coolant System: 208l coolant tank, Variable coolant flow Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN Fodpfx Abox D Ezfj Tegk Additional Features: Macros, SOM This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Year of construction: 2022, operating hours: 1,790 h, condition: ready for operation (used), Main Drive Spindle speed range 50 - 6000 Spindle motor power 11.5 kW Spindle bore 62 mm Number of axis 2 Additional Equipment Fgsdpfx Aox D D H Hsb Tsk Automation: Samsys short bar loader Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools two BMT55 revolvers with 16 stations each This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2023, condition: ready for operation (used), Control Unit Brand FANUC Model 0i-TF Media Chip conveyor Yes Additional Equipment Cooling center 10 bar Bar feeder interface Chip conveyor, lateral ejection Automatic tool measurement 3 jaw power chuck; diameter 250 mm for spindle head standard A2.8 This 3-axis SMEC SL2500LM horizontal turning machine was manufactured in 2023. It features a Fanuc 0i-TF+ control system, a 12-station tool turret with BMT, and a chip conveyor for lateral ejection. It includes a 3-jaw power chuck with a 250mm diameter. If you are looking to get high-quality turning capabilities, consider the SMEC SL2500LM machine we have for sale. Contact us for more information about this machine. Application Types Turning Fedjx D Smhjpfx Ab Tjgk

Condition: ready for operation (used), Year of construction: 2018, operating hours: 15,000 h, Control Unit Brand SIEMENS Model Sinumerik 840D SL Main Drive Number of spindles 2 Spindle speed range 0 - 5000 min-1 Spindle motor power 29 kW Spindle bore 76 mm Tool taper BMT 55 Turret Number of tool slots 2 x 12 Rotating tools Yes Media Chip conveyor Yes Internal cooling Yes Additional Equipment Top Automazioni bar loader (Model: ETL10-75, YOM 2018) - weight 2500 kg 600l external cooling water tank with belt filter from Bürener Parts ejector and flushing through the counter spindle Chip conveyor with an ejection height of 1200mm (programmable) Coolant device integrated in the chip conveyor 2 pcs. High pressure pumps with 14 bar // 2 pcs. flushing pumps with 3.7 bar Electronic handwheel 840D COMPRESSED AIR SYSTEM FOR GLASS SCALES EMCO TOP LOAD 15-75/3200 MULTI-LEVEL PART CATCHER WITH FINISHED PART DUST BELT // BELT FILTER SYSTEM This EMCO HYPERTURN 65-1300 DUOTURN CNC Turn-Mill Center was built in the year 2018 in Austria. It is equipped with a SIEMENS Sinumerik 840D SL Control and 2 turrets including milling drive and 2 Y-axes. This highly productive CNC turning/milling center is perfect for the complete machining of turned and milled parts with 1300 m spindle distance. It has integrated spindle motors (ISM) on the main and counter spindles with a spindle speed range from 0 - 5000 min-1. This complete center features 2x 12-fold tool turret radial with directional logic for up to 2x 12 driven tool stations (swivel speed adjustable with feed switch). It comes with several extras from MT65/HT65 BigBore77 to BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 (the VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface). See original PDF (German) with all positions attached. Check out photo and video gallery for more details. Application Types Fodpfex D Dzkox Ab Tjgk Turning

Year of construction: 2024, condition: ready for operation (used), Main Drive Spindle speed range 3400 Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Fgsdpfox D Rmmox Ab Tjk This 3-axis HAAS ST-25Y horizontal turning machine was manufactured in 2024. It features a 254 mm hydraulic chuck, a BMT65 turret with 12 positions, and live tooling capabilities up to 4,000 rpm. The machine includes a 1 GB standard program memory, a coolant tank of 208 liters, and an Ethernet interface. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Fjdsx D Nkqjpfx Ab Tsgk Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Fgjdpfx Ajx D Il Heb Tok Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2022, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 3400 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 239 mm Z-Axis Movement 826 mm Y-Axis Movement 50.8 mm This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. Application Types Turning Fgodpfx Abjx D Iixs Tsk