CNC Turning- and Milling Center

DMG MORI NLX 2500 SY / 700

Condition: ready for operation (used), Year of construction: 2019, Control Unit Dedpsxlvb Sjfx Afzsku Brand MITSUBISHI Model M730UM with CELOS Main Drive Number of axis 4 Additional Equipment Full-closed loop control for x-axis Workpiece unloader including belt Automatic door Robot interface Bar Feeder interface 10 external M-codes Transformer Alternating speed option // High speed canned cycle option Island, open pockets option Addition of optional block skip option This 4-axis DMG MORI NLX 2500 SY / 700 was manufactured in 2019, featuring a Sauter turret capable of 10,000 rpm, dual spindle tailstock, high-pressure coolant system, and full-closed loop control for the X-axis. It includes interfaces for robots and bar feeders, enhancing automation and productivity. Consider the opportunity to buy this DMG MORI NLX 2500 SY / 700 turn-mill center. Contact us for more information about this machine. Application Types Turning

Condition: reconditioned (used), Year of construction: 2019, CNC Lathe DMG MORI NLX 2500 SY/700 Equipped with: DMG MORI M730 UM MAPPS CELOS control Year of manufacture: 2019 Turning diameter: 356 mm Travel in X-axis: 260 mm Travel in Z-axis: 795 mm Travel in Y-axis: ±50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Driven tools speed range: 10000 rpm Includes the following accessories: - Work area door with interior lighting - 12-position turret with 12 driven stations - C axis, Y axis - Touch probe (Marposs) - NC tailstock with foot switch - Manual tool presetting device (HS) Dsdpfx Aow Suv Nsfzjku - 3-jaw hydraulic chuck Kitagawa BB 254 with foot pedal (HS) - Various jaw sets for main spindle (HS) - 3 driven tools - Direct measuring system X, Y, Z axis - 4-color signal lamp - Chip conveyor - High-pressure coolant system with compact filter unit, 70 bar / 700 l tank - Operating manuals

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter Djdpfxjvy Ig Ho Afzoku DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis

Condition: used, Year of construction: 2018, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 20 / 20 BMT40 : 5.5/5,5/3,7 kW speed of driven tools: 10000 1/min total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Djdpfxow Av T So Afzsku Robot interface High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning diameter over cross slide: 740 mm, turning diameter: 920 mm, spindle motor power: 18 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, milling spindle length: 91 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, swing diameter over cross slide: 740 mm, spindle nose: JIS A2-8, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Dksdpfx Aewkf H Dofzeu Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Mist collector Workarea light Chuck foot switch (double) for main and counter spindle Coolant gun Measuring probe Paper band filter Preparación para trabajar con robot Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Hight 20mm Max. Weight by robot piece: 5,6kg Working time hours Under power: 23.501 Potencial nominal kVA: 48 Cutting Time: 7.494 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: good (used), Year of construction: 2017, operating hours: 10,665 h, machine/vehicle number: NL256171030, Control M730 UM Mapps CELOS Max. turning diameter: 350 mm Turning length: 700 mm Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle bore: 80 (91) mm C-axis: 0.001° Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 20 pos. Square tool shank height: 25 mm Drill shank diameter: 50 mm Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 4.2 kW Machine weight: approx. 6.4 t Space requirements: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI – NLX 2500 SY / 700 Dsdpfxswum Has Afzeku - Counter spindle - Tool drive - C, Y-axis

Condition: used, Year of construction: 2014, turning diameter max. 356 mm turning length 705 mm control 730 UM Celos greates pass round over bed 920 mm Swing dia. over traverse guideway 740 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm Dodpfx Afowd Txnozeku C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min Tipp feed 0 - 5.000 mm/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 49 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only 13.000 hours of processing time - incl. 4x driven tools - incl. 6x standard holders