Used Blown Film Extrusion for sale (1,678)

Year of construction: 1998, operating hours: 4,500 h, condition: ready for operation (used), General Data Measurements width 5000 mm Measurements depth 20000 mm Measurements height 3400 mm Additional Equipment Non-contact thickness measurement for automatic TD profile measurement with double-sided corona treatment (max 12000W) Optical inspection system, including a marking system for detecting faults, incident and transmitted light system Includes components for cooling, screen changing, feed block, slot die, cutting, edge banding, drying, dosing, transferring, and antistatic control. This Battenfeld BA 60 film extruder was manufactured in 1998. A reliable choice for your film extrusion needs, it represents a solid addition to any production line. Contact us for more information. Ljdpfev Tq Tcex Ab Uoah Application Types Extrusion

Year of construction: 2025, condition: new, Extruder 30 mm - 28 l/d Lsdpfx Aoi Tu U Usb Uoah with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off with haul-off with winder and guiding device

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Ledpfx Aovri Ddeb Uoah Options • Including haul-off • Including cooling bath

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Lodpfewg Sd Uox Ab Ujah Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: good (used), Strech film machine Brand:Nissen Type:2400 Serie no:1469 Year:1999 Techn info: Rotating plate 2400mm in diameter Max hight wrapping approx. 2000mm Laodpfx Abop T Tz Ae Uoh Total hight column 2450mm Stock no:2001830BXM

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Laedpfxsvkg H Te Ab Ujh Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: used, functionality: fully functional, Fujifilm Luxel F-4080 Film Separator. The Luxel F-4080 is part of Fujifilm's Luxel family of image capture systems. It is a multi-laser imaging system that automatically scans a series of working images downloaded from a RIP server onto film, using an internal drum and a high-speed rotary device to scan the film. It processes the data for fast optical scanning, provides continuous film transport using a dual-cassette system, controls the delivery of cut and punched film to the developer, and controls the software system that manages all the main modules. A touchpad with menu windows in the form of icons and selectable buttons is used to operate the machine. Good working condition. Please check out our other listings as well. Ledpfxsv Rr Aas Ab Ueah

Condition: excellent (used), Year of construction: 2017, Machine for foil wrapping stacks of printed products for protection Lasdpfjv Sdcuex Ab Ujh

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 Lodpspu Anmefx Ab Ujah - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 • 6 caterpillar • Up to 800mm • Motor power : 8,5kW Lodpfx Aeix I I Iob Usah • Great condition

Condition: as good as new (ex-display), Falling-film evaporator – unused – The machine consists of three units that need to be connected in series: - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Laedpfx Aod Hb Acsb Uoh Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: used, Only for export! Ljdpfxjvi Nhwo Ab Uoah G&J ML860 Film Processor, online version

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Ledpfx Absvvlyio Ueah Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: good (used), Year of construction: 2010, Film wrapping machine for the protection of printed products Lajdpfxotk Tbwj Ab Ush

Condition: used, Year of construction: 2004, A film sealing machine is for sale. Type: KW 8060 Universal Year of manufacture: 2004 Machine number: RZ 05.04.105 Lodev Hx Nxopfx Ab Ujah

Year of construction: 2025, condition: new, functionality: fully functional, Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Suitable for all models. The chain is sold by the meter! Laedjv Dhnxopfx Ab Ujh Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Suitable for all models. The chain is sold by the meter!

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Lsdpfx Abjvztb So Usah Tube Deposit Unit -500

Condition: new, Year of construction: 2025, functionality: fully functional, This UV DTF printer digital flatbed printer - replaces the current laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials. Easy peeling and sticking on many surfaces! Lasdpog Icd Ssfx Ab Ujh New model: UV4060DTF Printhead: Epson TX800 2690 dpi max. Including software for printer and image processing Dimensions: 800*858*566mm Weight: 70kg A3 size 31x55cm and 23cm height possible 5x500ml color can be included!(extra charge) Software setup and printer explanation gladly if needed. Germany/Europe. (Surcharge) Print videos etc. can be sent gladly by Mail/WhatsApp.

Condition: used, Film Densitometer Techkon RT112 without accessories, with battery Lasdpfx Ajr Drtkeb Uoh

Condition: used, gusseted bags 1,500 x 2,600 mm thickness 0.100 mm Ljdpscw Tuvjfx Ab Ujah 15 bags / roll price per roll 4 rolls on stock

Condition: new, Year of construction: 2023, functionality: fully functional, total width: 2,200 mm, total length: 2,900 mm, total height: 2,250 mm, type of input current: three-phase, film width: 250 mm, product height (max.): 10 mm, product length (max.): 300 mm, product width (min.): 40 mm, product width (max.): 40 mm, product length (min.): 230 mm, input voltage: 380 V, feed length X-axis: 2,000 mm, roll width: 500 mm, input frequency: 50 Hz, Horizontal packaging flow-wrapping machine Lodpfxsrlm R So Ab Ueah We offer for sale a state of the art horizontal form, fill and seal machine model CO 50 Servo. With its robust design and versatile functions, it offers an efficient solution for packaging applications in various industries. Features: Manufacturer: Willi Kopp e.K. Packaging Systems Maximum bag length: 300 mm Minimum bag length: 230 mm Suitable wrapping materials: Polypropylene (30 to 60 my thickness) Maximum film width to be processed: 250 mm Machine output: Approx. 80 to 100 bags per minute Connections: 380 V, 50 Hz, 3Ph + N + Pe Project-related design: Horizontal flow-wrapping machine CO 50 Servo in right/left version Servo-controlled for precise movements Preheating of the longitudinal sealing wheels for optimum sealing Signal exchange with upstream machine for seamless integration Advance warning at end of film roll for uninterrupted operation Emergency stop link for maximum safety Photocell control for printed films Including operating instructions in German Additional features: Fixed forming shoulder for precise packaging results Infeed conveyor (2,000 mm long) with carriers for smooth feeding Opening of the cross and longitudinal sealing jaws when the machine stops for easy maintenance Single, self-centring film spindle for even film guidance Two pairs of cross sealing jaws for fast sealing Outfeed conveyor for efficient product removal Commissioning and warranty: The machine is in its original packaging and not in use. An inspection in our hall is possible.

Year of construction: 2023, condition: refurbished (used), SFV/800 Shrink Film Wrapping Machine Overhauled 2023 Workpiece length min. 1000 mm Maximum workpiece length 6300 mm width maximum 290 mm Height maximum 180 mm Speed 15-60 m/min at maximum film thickness 40 μ Film width maximum 970 mm The position of the film from above Film thickness from 25 μ Heating elements - radiators Power 15-24 kW Ledpfxsin Nnkj Ab Ujah Weight 1900 kg Length of the shrink tunnel 3500 mm Electrical control - Siemens CPU S7-1500

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Lajdpsvzqy Ssfx Ab Ujh

Condition: used, gusseted bags 1,150 x 2,700 mm thickness 0.100 mm Lajdpfocw Tuwsx Ab Uoh 11 bags per roll price per roll 6 rolls on stock

Year of construction: 2012, condition: used, flat film 6,000 mm x 50 m Laedpfx Ascw Tuujb Uoh thickness 0.100 mm colour - blue price per roll