3
Lenght: 1,8 m
Width: 2 m
Height: 2,1 m
Robuschi Blower in very good condition.
Max pressure data:
Chg7i2rky
- Pressure 700 mbar(g)/ 10 PSI;
- Capacity 4710 m3/h. 2770 CFM;
- Motor 132 kW/ 200 BHP;
- Noise 78 dB.
Max vacuum data:
- Pressure 500 mbar (a)/ 15 IN. Hg.;
- Capacity 4500 m3/h 2648 CFM;
- Motor 110 kW. 150 BHP;
- Noise 78 dB(A).
8
centrifugal fan, dust extraction fan, fan, suction, dust blower
Cx2to3wk
-Motor power: 18.5 kW
-Speed: 2940 rpm
-Inlet connection: O 520 mm
-Connector output: 440 x 490 mm
-Impeller: O 500 mm
-Dimensions: 1700/1300/H1080 mm
-Weight: 500kg
4
Lenght: 2,1 m
Width: 1,8 m
Height: 2,1 m
Weight: 3805 kg
Blower PAM HB950C in very good condition.
Gauge pressure :
- Max. pressure differential 1000 mbar;
- Max. flow rate 93,1 m3/min.
Vacuum:
- Max. pressure differential 500 mbar;
- Max. flow rate 91,65 m3/min;
Byxpqrinqg
- Max. rated motor power 200 kW;
- Pipe connection. 250 DN.
7
centrifugal fan, dust extraction fan, fan, suction, dust blower
-Motor power: 37 kW
-Speed: 2940 rpm
-Inlet connection: O 420 mm
Rqdmxnqe8
-Connection output: 450 x 300 mm
-Dimensions: 1700/1300/H1080 mm
-Weight: 500kg
9
centrifugal fan, dust extractor fan, ventilator, exhaust, dust blower, blower, exhaust fan
-Manufacturer: CAT Blower, dust extraction fan exhaust fan type SQR
-Motor power: 0.75 kW
-Speed: 2800 rpm
-Connection input: Ø 150 mm
-Connector output: 215 x 185 mm
-Impeller: Ø 260 mm
Hhms3san
-Dimensions: 820/610/H480 mm
-Weight: 40kg
Discover more used machines
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 45 kW
Ih3cr80pu
-Speed: 1470 rpm
-Volume flow: - m³/h
-Connection input: Ø 700 mm
-Connection output: 410 x 410 mm
-Dimensions: 1700/1130/H1660 mm
-Weight: 890 kg
5
* General * SKU254S1023 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
B7je9enxjo
3
Diameter 250 mm
Total length 2500 mm
Nadelfilz
Piyxp
4
Brand new, original packaging from stock.
Article number : 10026193 , G025706
Fh9w292
Side channel blowers generate suction or blown air for a wide variety of industrial applications. They contain a non-contact, high-speed rotating impeller and are therefore wear-free and maintenance-free. On both sides of the impeller there are two ring-shaped separate side channels with the housing. Single-stage device for high volume flow.
4
Nominal heat output 94 kW
Air flow rate 6920 m³/h
B8u9jdcb00
Gas type adjusted for liquid gas
4
Fan Höcker ZK 35/250/15.0
Cbuibdaiux
Like new
Motor : 400/690V AC , 15.0kW,B3,IP54, 1400U/min
Capacity : 5800m³/hour
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 11 kW
-Density: 1.2 kg/m³
-Volume output: 84 m³/min
S0xei2t33
-Pressure increase: 3800 Pa
-Connection input: Ø 275 mm
-Connection output: Ø 270 x 130 mm
-Dimensions: 1000/800/H700 mm
-Weight: 252 kg
4
offer consists of:
Dzjvgi
Horizon TB-30
trimmings blower
for Stitchliner or booklet maker
- weight: 110kg
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
4
Manufacturer:
Aerzen
Type:
Delta Blower
B3z89gzhs
Year of manufacture:
2009
7
Used PET Blower Siapi 2004 type EASP 20 Italy This is a complete blow molding machine which was not in use for the last 3 years Blower speed 2 500 bph for 2 L bottles The machine has 2 cavities for neck sizes 28 38 mm This Siapi Blower can be tested with a dry run Weight blower 5 000 kg elevator 250 kg positioner 250 kg All the necessary technical documentation for this machine is available Required installed power 120 kW Compressor Tempo Tehnika 350 2004 Specs 1100 rpm 75 kW 42 bar Dehumidifier...
9
An Aerzen rotary blower with acoustic hood.
Run until 2019 and regularly serviced by specialist company.
Has been used as a pressure blower.
Ready for use and tested immediately.
Manufacturer: Aerzen RKR
Type: GM 7L Aerzen Stage
Year of manufacture: 2006 (inquired at manufacturer) !!!
Volume flow: 7m³/min
Pressure increase: 400 mbar
Cbnq8kla
shaft power: 6,68 kW
motor power: 7,5 kW
speed compressor: 4140 rpm
Electric motor: Lammers
Efficiency: IE 3
Voltage: 400 Volt
Speed: 2950 rpm
Alternatively...
8
Type: HF R 800-13 D DS3
Manufacturer: Hürner Funken
Year of manufacture: 2009
Documentation: no
Inspection: yes
Storage location: customer
Status: used / second hand
volume flow: 48000 m³/h (max.)
pressure: 2572 Pa
Motor: (direct drive)
Voltage: 400 V
frequency: 50 Hz
amperage: A
Power: 55 kW
revolutions: 1280 1/min
Buoh9iapyu
Connections:
Diameter: 800 mm (suction side inside)
-: 692 x 692 mm (pressure side inside)
Material: PVC (housing (fan wheel coated))
Dimensions: (total...
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 15 kW
-Speed: 1450 rpm
-Volume flow: 7000 m³/h
-Total pressure: 2800 Pa
-Connection input: Ø 400 mm
Uurvaveo
-Connection output: Ø 400 x 350 mm
-Dimensions: 1200/1000/H1120 mm
-Weight: 450 kg
4
offer consist of:
- complete set extra air blower for 3 collators
- compatibel with:
Horizon VAC-100, VAC-1000
Gfnncii9w
- weight:
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
7
Aerzen blower aggregates rotary piston blower
Qlun9
Here we offer an Aerzener blower-aggregate rotary piston blower.
Type Positive Displacement Blower
Version overpressure , underpressure
Volume flow 33,34 m3/h
Conveying medium air , neutral gases
Conveying oil-free
Performance data
Pressure difference, mbar -500
Volume flow*, m3/h 2,280
Motor power, kw 37-42
Sound pressure level, max. db(A) 75
Dimensions and weights
Width (A), mm 1,500
Depth (B), mm 1,800
Height (C), mm 1,978
Weight, kg 1386 Kg...
10
We offer a 2.2 kW blower, which was been only rarely used.
Ypvmdlmr
Used blower and rinser COSTEC SFS 9 250 the Year 2006 for 2500 b h The COSTEC blow molding machine has 9 nozzles and it comes with single pliers for gripping and overturning bottles The machine is in an excellent condition and the previous owner always carried out the required maintenance This means that this blow molding and rinsing machine is ready to be inserted into the production cycle In the used blower and rinsing machine turning the bottle upside down begins the blowing phase in order to...
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Aggregates come from a UV lacquer drying system
-Motor power: 0.43 kW
-Speed 2800 rpm
-Volume output: 22.5 m³/min
-Pressure increase: 580 PA
Lxgib
-Connection input: Ø 120 mm
-Connection output: Ø 160 mm
-Number: 2x fan available
-Price: per piece
-Dimensions: 530/350/H300 mm
-Weight: 10 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
E87ldbv
-Aggregates: come from a UV lacquer drying system
-Motor power: 0.155 kW
-Speed: 1400 rpm
-Volume output: 18.5 m³/min
-Pressure increase: 220 PA
-Connection input: Ø 140 mm
-Connection output: 100 mm
-Number: 3x fans available
-Price: per piece
-Dimensions: 380/350/H260 mm
-Weight: 8.2 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 2.2 kW
-Speed: 2820 rpm
-Volume output: 48 m³/min
-Pressure increase: kPA
-Connection input: 190 mm
-Connection output: 155 x 155 mm
-Number: 1x fan available
-Price: per piece
Glodcuiyi
-Dimensions: 440/380/H475 mm
-Weight: 27 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 0.45 kW
-Speed: 2800 rpm
-Volume output: 22 m³/min
-Pressure increase: kPA
-Connection input: 140 mm
-Connection output: 110 x 110 mm
-Number: 1x fan available
-Price: per piece
-Dimensions: 300/290/H360 mm
-Weight: 12 kg
D8ru3f
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 0.7 kW
-Speed: 2750 rpm
-Volume output: 20 m³/min
-Pressure increase: 110 kPA
-Connection input: 150 mm
Yrqsnsjul
-Connection output: 110 x 110 mm
-Number: 1x fan available
-Price: per piece
-Dimensions: 285/290/H360 mm
-Weight: 10 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 2.2 kW
-Speed: 2820 rpm
-Volume output: 48 m³/min
-Pressure increase: kPA
-Connection input: 180 mm
Ct8oy2qg
-Connection output: 155 x 155 mm
-Number: 2x fan available
-Price: per piece
-Dimensions: 440/380/H420 mm
-Weight: 31 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
Yrqr0p8mj
-Motor power: 1.8 kW
-Speed: 2820 rpm
-Volume output: 45 m³/min
-Pressure increase: kPA
-Connection input: 190 mm
-Connection output: 155 x 155 mm
-Number: 1x fan available
-Price: per piece
-Dimensions: 440/380/H475 mm
-Weight: 24 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 1.5 kW
-Speed: 2820 rpm
-Volume output: 45 m³/min
-Pressure increase: kPA
-Connection input: 250 mm
-Connection output: 170 x 150 mm
Yrqsebeak
-Number: 2x fan available
-Price: per piece
-Dimensions: 420/395/H540 mm
-Weight: 24 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 1.1 kW
-Speed: 2800 rpm
-Volume output: 35 m³/min
-Pressure increase: 95 mm water column
-Connection input: 200 mm
-Connection output: 105 x 120 mm
-Number: 1x fan available
2p8sti
-Price: per piece
-Dimensions: 340/390/H470 mm
-Weight: 18 kg
4
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 0.37 kW
-Speed: rpm
-Volume output: 5.8 m³/min
-Pressure increase: 1300 kPA
G72d3x
-Connection input: 78 mm
-Connection output: 78 mm
-Number: 1x fan available
-Price: per piece
-Dimensions: 680/370/H520 mm
-Weight: 28 kg
5
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan
-Motor power: 0.175 kW
Ndpa7
-Speed: 1310 rpm
-Volume output: unknown
-Connection air duct: 130 x 135 mm
-Dimensions: 340/290/H130 mm
-Weight: 6 kg
5
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan
-Motor power: 0.56 kW
-Volume output: approx. 45 m³/min
-Connection air duct: 285 x 150 mm
-Number: 2x fan available
-Price: per piece
Bwuzoy9
-Dimensions: 380/380/H330 mm
-Weight: 15 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 1.1 kW
-Speed: 2870 rpm
-Volume output: m³/h
-Pressure increase: Pa
-Connection inlet: Ø 270 mm (without nozzle)
-Connection output: 100 x 140 mm
-Number: 1x fan available
-Price: per piece
-Dimensions: 540/400/H775 mm
Bdfeiesowh
-Weight: 40.5 kg
5
High pressure radial fan, dust extractor fan, exhaust gas extractor, welding fume extractor, extractor fan, pressure fan, vacuum fan
-Motor power: 0.12 KW
-Speed: 2780 rpm
-Volume output: 252 m³/h
-Pressure increase: 240 PA
-Connection input: Ø 142 mm
-Connection output: 56 x 52 mm
-Number: 1x fan available
-Price: per piece
Ihwuued2
-Dimensions: 270/180/H160 mm
-Weight: 4.8 kg
5
High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan
-Motor power: 0.64 kW
Nhqxfb3d
-Volume output: approx. 45 m³/min
-Connection air duct: 285 x 140 mm
-Number: 2x fan available
-Price: per piece
-Dimensions: 390/340/H340 mm
-Weight: 12 kg
4
High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan
-Motor power: 0.29 kW
-Speed: 1800 rpm
-Volume output: unknown
-Connection air duct: 164 x 95 mm
Ptvrpm
-Dimensions: 465/325/H230 mm
-Weight: 11 kg
5
Blower filter device, welding smoke filter, welding smoke extractor, breathing apparatus
Niwfb
-filters
-in the suitcase
-with out battery
-Dimensions: 420/165/H335 mm
-Weight: 3.2 kg
5
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan
Bqjcbrna
-Motor power: 0.95 kW
-Volume output: 53.5 m³/min
-Connection air duct: 290 x 150 mm
-Number: 5x fans available
-Price: per piece
-Dimensions: 300/390/H390 mm
-Weight: 19.5 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
Noboj
-Motor power: 4 kW
-Speed: 2860 rpm
-Total pressure: Pg 66 m bar
-Total pressure: Pst 62 m bar
-Volume flow: 800 m³/h
-Connection input: Ø 108 mm
-Connection output: Ø 122 mm
-Dimensions: 1020/505/H1000 mm
-Weight: 110 kg
5
High pressure radial fan, dust extractor fan, exhaust gas extractor, welding fume extractor, extractor fan, pressure fan, vacuum fan
-Drive motor: Loher 7.5 KW
-Speed: 2920 rpm
-Volume output: 19.6 m³/min
-Connection input: Ø 140 mm
Bfq2c3r3p7
-Connection output: 100 x 100 mm
-Dimensions: 870/560/H1010 mm
-Weight: 192 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, heating fan, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
Muwcvw
-Exhaust gas exhaust fan
-E-motor: Lammers 400/690 V/3 kW
-fan: Hansa Ventilatorenbau type BC 280-5/4K-X/UX 1101
-Speed: 3179 rpm
-Volume output: 2160 m³/h
-Connection input: Ø 735 mm
-Connection output: 365 x 310 mm
-Dimensions: 1300/740/H820 mm
-Weight: 153 kg