Used Electric Heater Fan for sale (36,873)

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 500 mm, 2026 Weishaupt WM-G10/3-A ZM Monarch Industrial Gas Burner – 100–1,000 kW – Only 3 Months' Use – Complete Controls & Gas Train. Gbedez Iucwspfx Akyeu Manufactured 2026 and used for approximately three months as a temporary winter heating solution at a commercial facility. Removed from service following the site's transition to an electrified heat-pump heating system. Burner was operational prior to removal. Complete with associated Weishaupt controls and gas train/components as pictured. Original purchase/parts receipts available.

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Godpfez Iw A Hsx Akysbu Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Year of construction: 2008, condition: excellent (used), Electric heating rod Shock- and impact-resistant heating insert system with heating conductors embedded in silicone for airtight sealing. No wear, no corrosion, reliable operation even in continuous operation and under shocks and vibrations. Temperature setting via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressure surfaces on all sides. Standard gold-anodized finish, scratch- and abrasion-resistant, easy to clean. Size: Type: EST 21 Length: 2100 mm Connection value: 1100 watts, 230 volts Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: in stock at warehouse 54634 Bitburg Godpolcd Szefx Akysbu - immediately available -

Condition: used, Year of construction: 2018, operating hours: 5,834 h, load capacity: 2,000 kg, fork length: 1,150 mm, empty load weight: 900 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery rest voltage: 25.04 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 1,400 mm Own weight: 900 kg Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 5,834 h Gedoz Iwxhepfx Akysbu EQUIPMENT Linde full-service history formerly a Linde full-service unit All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 437

Condition: used, machine/vehicle number: W41153L00104, Year of construction: 2022, operating hours: 3,050 h, load capacity: 2,000 kg, lifting height: 150 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! Godez Iwwdjpfx Akyebu TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 150 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 166 Ah Battery voltage in idle state: 25.3 V Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,300 mm Own weight: 900 kg Operating hours: 3,050 h EQUIPMENT Folding platform Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 397

Condition: excellent (used), functionality: fully functional, Electric water heater Gbjdpfx Aovbfvhokyju Maximum power - 18kW

Condition: used, Thermal system, fan heater, heating elements -Manufacturer: Ziehl-Abegg, axial fan, axial fan, heating fan -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg Gbjdpfx Aksuqf Hzoysu

Condition: used, machine/vehicle number: 91671500, Year of construction: 2023, operating hours: 1,435 h, load capacity: 7,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Tires: White, non-marking tires Lighting: StVZO-compliant lighting with turn signals for road approval Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Weight: 1,500 kg Godpfx Aez Iwt Sekyjbu Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 1,435 h EQUIPMENT Battery charger Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 357

Condition: used, Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater, fan heater, fan heater, switch cabinet fan -Manufacturer: RO/SE fan heater/switch cabinet heater Gbedpjf Sxbujfx Akysu -Type: HH/250s -Power: 250 watts -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) Gbsdpozktkzjfx Akyju 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun)

Condition: used, machine/vehicle number: 516301X00339, Year of construction: 2020, operating hours: 5,917 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,150 mm Load capacity: 2,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex free-lift mast Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery voltage in idle state: 85.4 V Mast type: Duplex free-lift mast Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Weight: 4,700 kg Service valid until: 05/2027 Safety inspection valid until: 05/2027 Operating hours: 5,917 h EQUIPMENT Former Still full-service unit 3rd and 4th valve Fork positioner Hydraulically adjustable forks Side shifter Semi-cabin Windshield wiper Comfort seat LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear If the mast is too high, it can be dismantled for transport upon request and loaded accordingly. Gbodpfsz Iwqkjx Akyeu All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged if collection is not made on time. Outstanding storage fees must be paid in full before collection. Lot number: 159

Condition: used, Radial fan, fan, Dahlander electric motor, three-phase motor with 2 speeds, 1.6 kW + 6 kW, BLECHER type 132 S4 / 2 For exhaust, cooling, or ventilation Fan impeller diameter: Ø 400 mm Fan impeller width: 175 mm Shaft diameter, motor shaft: Ø 38 mm Motor design: Dahlander star / double star Motor speed: 1440 / 2870 rpm Number of poles: 8 / 4 Motor power: 1.6 / 6 kW Mains connection: 400 volts, 50 Hz - Dahlander three-phase motor with 2 speeds - Fan impeller made of metal - Fan cover made of metal, Ø 465 mm - Electric motor with standard foot flange, mounting holes Ø 11.5 / hole spacing 215 x 140 mm Space requirement L x W x H: 570 x 465 x 465 mm Gedpfx Aezinyhjkysbu Weight: 57 kg Good condition 2 units available, price per unit.

Condition: used, Thermal system, fan heaters, heating elements, radial heaters Gbodpfjrkp Nxsx Akysu -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Condition: used, machine/vehicle number: 91671501, Year of construction: 2023, operating hours: 2,803 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Own weight: 1,500 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,803 h EQUIPMENT Battery charger Road traffic regulations (StVZO) lighting Direction indicator Road approval Formerly a Jungheinrich full-service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Gbjdpfx Asz Iwvyokyju Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 373

Condition: used, machine/vehicle number: 91671431, Year of construction: 2022, operating hours: 423 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Traction force: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 375 Ah Battery type: 3 PzS Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 2,200 mm Own weight: 1,500 kg Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 423 h EQUIPMENT Cabin Windshield wiper White, non-marking tires Godpfxoz Iwv To Akyjbu Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Safety light at the front formerly a Jungheinrich full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 388

Condition: used, machine/vehicle number: W4X133X02132, Year of construction: 2020, operating hours: 3,929 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,574 mm Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 800 x 1,315 mm Self-weight: 1,500 kg Battery year of manufacture: Battery voltage: 24 V Battery capacity: 500 Ah Battery type: 4 PzS Rest voltage: 24.9 V Service contract valid until: 03/2027 Operating hours: 3,929 h EQUIPMENT Formerly a Linde full-service unit Initial lift for double-stack operation Increased ground clearance for uneven floors All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Gjdoz Iwu Nepfx Akyobu Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 371

Condition: used, Thermal systems, fan heaters, heating elements Gedpeff Nmgofx Akyjbu -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Capacity: 15-100 kg/h Year of manufacture: 1998-2006, multiple units available Godpfxsh Ibgpj Akysbu Please arrange an inspection by phone. We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. We will, of course, take care of all formalities. Loading possible.

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Z 400 mm Gbedpez D Egrsfx Akyeu Including coolant system Water bath machine

Condition: used, Thermal system, fan heater -Space-saving fan heater: HVL 031 -Power: 225 W Gbedpfx Ajff Nmfekyju -Price: per piece -Number: 2 pieces -Dimensions: 90/130/H160 mm -Weight: 0.9 kg/piece

Condition: used, Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1405 rpm -Shaft: Ø 28 mm -Design: B3 -with extra cooling fan -Protection class: IP 55 -Dimensions: 410/260/H195mm Gsdpoct Er Tsfx Akyjbu -Weight: 20kg

Condition: used, Three-phase motor, electric motor -Manufacturer: Elektror, electric motor for radial fan type D-06 / S484 -Power: 0.5 kW -Speed: 2800 rpm -Shaft: Ø 14 x 35 mm Godjupbc Aspfx Akysbu -Protection class: B TROP -Dimensions: 295/200/H150mm -Weight: 6.5 kg

Condition: used, Electric motor, three-phase motor Gbodsfff Nrepfx Akyju -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -with: fan -Dimensions: 585/250/H260mm -Weight: 29 kg

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Gbodpfx Aozuvyaokyju Year of manufacture: 2014, available from the end of August.

Condition: used, machine/vehicle number: FN668522, Year of construction: 2022, operating hours: 2,910 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,500 mm Fork length: 2,200 mm Fork positioner range: 550–1,850 mm MACHINE DETAILS Mast type: Free-lift mast without a central hydraulic cylinder Battery year of manufacture: 10/2022 Battery voltage: 80 V Battery capacity: 775 Ah Battery idle voltage: 84.3 V Service valid until: 07/2027 UVV certificate valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 4,700 x 1,300 x 2,400 mm Own weight: 5,500 kg Operating hours: 2,910 h EQUIPMENT 3rd + 4th valve Formerly a Jungheinrich full-service unit Fork positioner with side shift Full cab Heater Windshield wiper LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support All dimensions are rounded values. No guarantee is given for typing or measurement errors. Gbsdpfx Asz Iwlbskyeu Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 97