Used Binns And Berry for sale (6,126)

Condition: used, Year of construction: 2007, operating hours: 11,800 h, Serial number: L70FV2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22029 Specifications: 2007 model Hours: approximately 11,800 125 kW Weight: 15,000 Tires (see pictures) Summer tires Volvo grader bucket Rotor lamp Dashboard replaced Turn signal lever has been replaced Emergency stop switch is new Injectors changed two years ago (not much has happened since then) One owner AC/climate Radio Ready for delivery Kfsdpjx Hdldefx Affoa   Description: 2007 Volvo L70F wheel loader w/ winter and summer tires and grading bucket. The machine has only had one owner throughout. The instrument panel on the machine has been replaced. The owner says an error code is coming up, but he says this is wrong since everything needs to be replaced. Watch video. Ready for delivery. Hours: 11800 Own weight: 15000 Kw: 125 Model: L70F hjullaster m/ vinter- og sommerdekk og planeringskuffe. En eier! Se video

Condition: refurbished (used), Year of construction: 2012, A complete line for the production of wood pellets with a capacity of 1.2 tons per hour from wood chipping and handling to the final product of wood pellet packed in nylon bags. Kedpfx Afsi Akrkjfsfa The complete line was designed by Italian engineering company FIDA who also has its own transport equipment, silos and conveyers. All the drawing and schematics and documentation is available. The project was financed by EU and was valued at about 1.3 million EUR which documentation confirms. Compleete line was inspected and refurbished so it is ready for use for many years to come. Its overall operating hours on most equipment is below 500 hours which is practically new equipment. It only requires 2 employes to operate per shift. CHECK EQUIPMENT LIST IN THE DOCUMENTS IN THE ATTACHMENT. 1. Wood chipper and transport conveyors 2. Hammer mill and dozing container and distribution conveyors 3. Drying, rotary drum, furnace, anti-fire pipes, ventilation and storage silo 4. Dust removal, pelleting, cooling and packing (It is about 6 full trucks of equipment) The complete line, almost the same as the one on sale, can be seen installed and in operation for reference before installation. More pictures are available on viber and whatsapp. We can also offer service of installing the pellet line. Depending of location and available equipment with the company performing the purchase.

Year of construction: 2014, condition: good (used), SYSTEM 2 - 2014 Serial number: 1006-0055 Model: S12 · Serial 1006-0055 - Year 2014 – Working hours 58366 Kjdpfxeppv Rxo Affsfa · Chuck type ISO50/110 · 1st grinding wheel axis 7,5/12,5kW right-handed Ø73mm external grinding · 2nd grinding wheel axis Ø100 60000-1/min M16/17 7,5kW internal grinding Serial number: 1040-0134 Model: S22 · Serial 1040-0134 - Year 2014 - Working hours 58810 · Chuck type CM4/70, · Grinding wheel axis 7,5/12,5kW right-handed Ø73mm external grinding

Condition: used, mileage: 780,000 km, power: 324 kW (440.52 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, gearing type: automatic, suspension: steel-air, Year of construction: 2008, Front axle: Steered; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Kfodpfxsxvy Iwe Affja Number of keys: 1

Year of construction: 2025, condition: new, Singlebeltpress up to 800 kg/h on fresh apples including automatic belttensioning and regulatingsystem integrated highpressure-beltcleaning-system inverter for beltspeed Wash&Grinding Unit with 3,0 Kw Kfsdpfs S Un Dox Affja full stainless-steel construction

Condition: reconditioned (used), functionality: fully functional, Spiralmixer Diosna SPV 240 AF with 2 bowls - 240kg dough, - after recondition Kfodpfx Asx H Tr Heffoa With Diosna bowl lift

Condition: used, Year of construction: 2012, operating hours: 7,500 h, Serial number: CAT0324EKTLF0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22026 Specifications: 2012 model Hours: approximately 7,500 Certified Weight: 26,280 kg Belt width: 60 cm Machine width: 318 cm 151 kW GPS Grading bucket (new rib) Chassis (See pictures) Filter package replaced at 5,000 hours Nox switched Oil change AC/climate Ready for delivery   Kedpfx Afsx Hdk Hjfofa Description: 2012 CAT 324E excavator with Leica GPS and grading bucket. Owner has replaced filter pack at around 5000 hours. Oil change and Nox sensors have been replaced. Watch video. Ready for delivery Hours: 7500 Own weight: 26280 Kw: 151 Model: 324E

Condition: used, Year of construction: 2005, operating hours: 3,600 h, 2005 | JCB 535-140 with forks and loading bucket | Used Telescopic Forklift | 3600 hours 📍Location: France, Joué-lès-Tours 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Ksdpjx El Rrsfx Affsfa The unit functioned during inspection recommended full service and filters 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40116 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 122,196 km, Year of construction: 2017, operating hours: 8,592 h, Drivetrain Drive: Wheel Weights Empty weight: 26.000 kg Functional Lifting capacity: 40.000 kg Identification Serial number: 256086 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Dunlop Carrier engine: - Kodpfx Afjw Uchxefefa Upper engine: - Counterweight: 5500 Transport dimensions (LxWxH): 10.7x2.55x3.4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, maximum load weight: 22,180 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 01/2012, next inspection (TÜV): 05/2026, loading space length: 11,500 mm, loading space width: 2,450 mm, loading space height: 2,410 mm, total width: 2,600 mm, Year of construction: 2012, INTERNAL DIMENSIONS: LEFT (main section) = 161 cm wide RIGHT (smaller section) = 84 cm wide HEIGHT under bulkhead = 220 cm Cooling unit brand: Carrier Additional information: * Unladen weight: 10,820 kg * Maximum axle load | First axle: 9,000 kg * Maximum axle load | Second axle: 9,000 kg * Axle position | First axle: Rear * Axle position | Second axle: Rear Additional equipment: * Homepage * Tail lift * Steering axle Kjdpfx Afox H Hrgsfsfa * SemCollection * Central lubrication Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please check in advance for the applicable costs and procedures in your country Location | Maasdijk (NL) | 140 km from the German border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors. Stated prices are exclusive of BPM and are valid only for export.

Condition: used, power: 350 kW (475.87 HP), Field of application: Mining Productivity: 120 tph Introducing the Polygonmach PMCC-2, a game-changing mobile crushing and screening plant on wheels with an impressive production capacity of 120-150 tph, depending on the material's hardness grade. Specifically engineered for robust and challenging applications, this comprehensive solution is designed to optimise your operations and maximise your productivity. The PMCC-2 features an optimum feeding size of 900 x 650 mm and a convenient feeding height of 4.2 meters. This dynamic system boasts of a primary jaw, secondary cone, and a 3 decks screen - a perfect configuration for tackling hard stones with utmost efficiency. Powered by a total motor capacity of 350 kW, the PMCC-2 caters to all your high-demand crushing needs. Its 550 kVA electric generator requirement ensures a seamless, power-efficient operation. With a compact weight of 56 tons and dimensions of 18 (L) x 3.2 (W) x 4.2 (H) meters, the PMCC-2 exemplifies efficiency packed in a robust, transport-friendly design. The machine's standout feature is the versatile Metso HP 200 or equivalent model cone crusher. It offers the capability to produce 3 or 4 different fractions simultaneously, ensuring high-quality, precise output. For applications demanding higher fine material ratio or more cubical product, the plant can be equipped with our V-80 mobile sand making plant, which includes a VSI crusher. This configuration, known as PMCV-2, brings added flexibility and performance to your operations. The Polygonmach PMCC-2’s user-friendly design promises easy mounting and assembling features. Kfodex D A I Aspfx Affea Technology: jaw Mobility: mobile Other characteristics: secondary, primary, compact, fine Capacity: Min.: 120 t/h(73 lb/s)Max.: 150 t/h(92 lb/s) Motor power: 350 kW(475.87 hp) Opening height: 850 mm(33.5 in) Opening lenght: 600 mm(23.6 in)

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Kfjdpfx Afjx D Dq Sjfsa Complete Production

Condition: used, Year of construction: 2022, Serial number: DXCCEBDTVN002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20907 Specifications: Certified until 10/2025 Year: 2022 Hours: approx. 2,600 Power: 79.8 kW Weight: approx. 16,620 kg Kfsdeww Ahrepfx Affsa Track width: approx. 70 cm Machine width: approx. 290 cm New tracks (replaced at approx. 2,100 hours) Engcon EC219 tiltrotator S60 quick coupler Gjerstad grading bucket Gjerstad digging bucket Central lubrication Webasto heater replaced Rear and right-side cameras Extra work lights Radio/CD A/C and heating Undercarriage: see pictures Description:2022 Doosan DX160LC crawler excavator offered on behalf of customer.Machine is in daily operation and will be delivered with 500-hour service completed before sale.Comes with Engcon tiltrotator and two Gjerstad buckets.Delivery by agreement. Own weight: 16620 Model: DX160LC Beltegraver – Rotortilt og 2 skuffer

Condition: excellent (used), Year of construction: 2007, Thomas Pettersson (Sweden) moulder infeed and outfeed. 2x 1.5kW inverter driven feed motors (80 m/min) on the accelerator. 4x driven feed rollers on the accelerator. Minimum timber length 400mm Max timber length 3500mm Kfsdpsu Ucpmofx Affoa Crossfeed infeed table to accelerator with 6x chains. Outfeed table with 4x crossfeed belts. 1st belt is wide to allow crossfeeding of very short pieces very simply.

Condition: used, mileage: 1,234,569 km, color: orange, first registration: 05/2005, Year of construction: 2005, Equipment: crane, Sand grabs and pallet hooks. Grab 3 = 59 x 1.27 - Grab 4 = 72 x 121 - Grab 5 = 65 x 1.28 Grab 8 = 80 x 1.75 - Grab 10 = 61 x 1.63 with rotator 1 = Pallet hook 2 = Grab 90 x 1.40 6 = Stone clamp, small 9 = Pallet hook 11 = Stone clamp 12 = Forklift forks 14 = Sand grab 49 x 97 with teeth 15 = Pallet hook 16 = Pallet hook 17 = Pallet hook 18 = Sand grab, small 20 = Stone clamp = Further information = Kfedpfjwwtmxox Affoa Suitable for: Construction machinery Crane: Palfinger / Atlas grabs, year of manufacture 2005, mounted behind the cab

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Kedovtpcijpfx Affofa SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: used, Field of application: Mining In the realm of heavy-duty machinery, Polygonmach leads with its revolutionary mobile crushing and screening plant on wheels. This unique mobile crusher, consisting of a jaw crusher measuring 600*380mm and a second chassis equipped with the renowned Metso hp100, is designed for the toughest applications. These units aren't merely a combination of superior technology and robustness but also exhibit a deep understanding of their user's challenging requirements. With the inclusion of a Sandvik ch430, Terex, or locally equivalent cone crusher, Polygonmach stands at the apex of engineering excellence, providing highly efficient, mobile, and flexible solutions. The three-deck vibrating screen, a vital component of this mobile plant, plays an instrumental role in classifying and separating materials, ensuring you receive the highest quality output. Its seamless integration with the crushers guarantees a streamlined operation, reducing downtime and optimizing production rates. What sets this Polygonmach mobile crusher apart is its closed-circuit configuration, specifically designed for processing hard stones. Unlike conventional crusher plants, the closed-circuit system ensures precise material grading, reduced fines, and enhanced end-product quality. The inclusion of the single chassis in this design further optimizes the machine's mobility and ease of setup. The array of belt conveyors integrated into the mobile crusher system adds another dimension of flexibility to the operation. Their role in material transportation is critical to the overall efficiency and speed of the operation, ensuring continuous and uniform feed to the crusher. Technology: jaw Mobility: mobile Capacity: Min.: 60 t/h(37 lb/s)Max.: 80 t/h(49 lb/s) Motor power: 220 kW(299.12 hp) Kfsdsx Dzb Uepfx Affsa Opening height: 550 cm(216.5 in) Opening lenght: 300 cm(118.1 in)

Condition: used, Year of construction: 2011, operating hours: 9,077 h, 2011 | Case WX95 with 4 excavator buckets and forks | Used Wheeled Excavator | 9077 hours 📍Location: France, La Chapelle-du-Châtelard 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 46 approved ✅ 12 imperfect ℹ️ 0 issues ⚠️ Kfjdpfx Afjx Dy Dzefsa 📌 Inspector's Comment: Good hydraulic and mechanical working condition. Few hydraulic leaks. 4-wheel drive and steering. See details below. Coupler to be manually relocked due to failure of the hydraulic latch (the solenoid of the 3-way valve seems to be out of order). 3 buckets, 1 drop, and 1 fork carriage. Full maintenance required. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39978 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2023, operating hours: 3,050 h, CE mark: yes Serial number: CAT0M315EKE52xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21842 Specifications : Certified 2023 model Hours: approx. 3050 Ksdpfxex Evrge Affofa 110 kW Weight: approximately 18,000 kg Tires (see pictures) CAT C4.4 engine TRS14 Tiltrotor SMP Sanding Bucket Cut Central lubrication LED bar Camera at the back and on both sides. Trailer hitch Rotor beam Radio/CD Air conditioning/ac Description : CAT M315 Wheel excavator from 2023 with 3050 hours. The excavator is certified and ready to be put into operation. It comes with TRS14 rotor tilt and SMP sanding tray. Gigant GD3-10X trailer can be included for an additional price. Can be delivered within a short time. Hours: 3050 Own weight: 17070 Year controlled: Yes Kw: 110 CE: Yes Engine hours: 3050 Model: M315 hjulgraver m/ tilt og skuffe

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Kfedpfx Afswt Sqhjfsa Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Year of construction: 2013, operating hours: 11,170 h, Serial number: KMTPC180K55K5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21438 Specifications: Model year: 2013 Approx. 11,170 hours Power: 116 kW Operating weight: 22,260 kg Undercarriage: see photos Track width: 60 cm Machine width: approx. 300 cm Digging bucket Grading bucket Kfedpoxgm Ewefx Affea Hydraulic breaker Indexator tiltrotator (2013) S70 quick coupler Rear-view camera Central lubrication Work lights Beacon light Radio/CD Climate control (A/C) Description:Komatsu PC210 tracked excavator from 2013 for sale.The machine is equipped with tiltrotator, grading bucket, digging bucket, and hydraulic breaker.Well maintained and ready for work.Available for quick delivery. Hours: 11170 Own weight: 22260 Width: 300 Kw: 116 Model: PC210LC-8 Beltegraver m/ 2 skuffer, tilt og Pigghammer

Condition: used, mileage: 117,898 km, Year of construction: 1978, Serial number: 100xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21424 Specifications: Kodpfx Afjxgcrgjfefa 1978 model 117,898 km Rep. Object 205 hp 6x2 Manual transmission Tires (see pictures) Rust of the rear housing (see pictures) Frame sand blue and varnished a few years ago Battery needs to be replaced. Tipping box Foldable aluminum limbs Internal length in plan: 6,115 m Internal width in plan: 2,475 m Light Heater Ready for delivery   Crane specifications: 1979 model 10 t/m crane 2 Hydraulic outriggers 2 Hydraulic extensions 1 Hydraulic extension on main boom 1 Manual Manually controlled Ready for delivery   Description: We have a 1978 Scania LB 81 6x2 Crane truck w/ 10t/m crane and tipper ekt for sale. The car is being sold as a repair item as it is no longer EU approved and there are errors and defects. There is a bad battery on the car, these should be replaced. Starter is starting to get bad. Errors and deficiencies exist and some cost must be taken into account to get it back in good condition. Ready for delivery Km: 117898 HK: 205 Technical approved: no EU-approved until: 28.02.2019 Own weight: 10100 Model: LB 81 6x2 Kranbil m/ 10t/m kran og tipp ekt Gearbox: Manual

Condition: used, Year of construction: 2022, operating hours: 2,560 h, Please contact ATS Norway for more information Please provide reference number upon request: 21985 Specifications: Certified until 03/2026 2022 model Hours: approx. 2560 Weight: 22,900 kg Kjdpfjx Dqtasx Affofa Power: 123 kW Undercarriage (see photos) R6 tiltrotator Digging bucket Grading bucket Central lubrication Rear and side cameras Extra work lights Rotor beam Webasto heater Radio/CD Air conditioning Description:Komatsu PC210 crawler excavator for sale with two buckets and an R6 tiltrotator.Leica GPS can be included at an additional cost.The machine is certified until March 2026. No known faults, only some cosmetic damage.The excavator has a service agreement with Hesselberg, and service was performed at 2450 hours.Available for quick delivery. Hours: 2560 Own weight: 22900 Kw: 123

Condition: used, mileage: 260,000 km, Year of construction: 2014, Serial number: 6FPPXXMJ2PDG3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21984 Specifications: 2014 model Mileage: approx. 260,000 km EU-approved until 15.08.2027 200 hp Rear seats included New studded winter tires (see photos) Summer tires Installed rear interior light AC/climate control Radio/DAB Ready for delivery Description:2014 Ford Ranger with two sets of tires.The owner is experiencing issues with the four-wheel drive and believes it is an electrical fault.Ready for delivery. Km: 260000 HK: 200 Technical approved: Yes EU-approved until: 15.08.2027 Own weight: 2116 Total Weight: 3200 Payload: 1009 Width: 185 Length: 527,4 Euro: 5 Model: RANGER Gearbox: Automatic Number of seats: 2 Kjdpfxex Dqt Te Affefa

Year of construction: 2020, operating hours: 1,050 h, condition: used, Serial number: 2292xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21978 Specifications: Kfsdpfox Dg Utox Affsa 2020 model Hours: approx. 1050 Chassis (see photos) Remote control Shaft set for concrete and wood Includes equipment for installing a magnetic belt AdBlue is disconnected Delivery by agreement Description:2020 Arjes Evo waste shredder.One shaft set for wood and one for concrete.See video.Delivery by agreement. Hours: 1050 Own weight: 11 Model: Evo Avfallskvern. For betong og treverk! SE VIDEO.