Used Basin Of Part Of for sale (17,373)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet Iodpfszrd R Uex Abnsif - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use Isdpfx Ajxhdwysbnsif AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types

Condition: used, Year of construction: 2001, total length: 13,500 mm, total width: 4,500 mm, Equipment: documentation/manual, type plate available, For sale from the laundry. Complete, working Kannegiesser mangle line (pair). Working width: 3000 mm. Full technical documentation. Composition: 1. EMD feeder - universal, manual and automatic feeding, 2 feeder paw stations, stretching brushes and arms for lifting heavy elements. 2. HPM double-shaft mangle - 2 x Ø1200 mm shaft, stainless steel basin, good mangle quality. Additional option for gastronomy. 3. RFM reversible folder - precise folding with 2 longitudinal and 3 transverse folds, with an additional track for smaller elements. Stacker Year of production: end of 2001 Technical condition: as after taking over from the laundry, efficient, in use until the end of February 2025, regularly maintained. Required space: approx. 13 m × 4.5 m, Required power 39 kW Iedpfjv Nbxnjx Abnjif Why is it worth it? - Kannegiesser brand – leader in the laundry ironing industry. - Easy availability of service and parts: service also in Poland. - High efficiency and precision: ideal for large quantities of flat laundry. - Price-to-capacity and quality ratio. A new one is worth over €400,000. Starting price: €69,900 net Do you have any questions? Do you want to know more? Contact us – we will be happy to provide additional information and send you technical details.

Year of construction: 2008, condition: ready for operation (used), Bio-Circle Compact parts cleaner / parts washing station - Year of manufacture: 2008 - Working area width: approx. 700 mm Iiodpsztd Ngefx Abnjf - Working depth / working area depth: approx. 450-480 mm - Working height: approx. 800 mm - Load capacity / load capacity up to approx. 100 kg - Empty weight: approx. 45-55 kg - Heating power: approx. 650-700 W - Temperature (preset): approx. 41 °C - Electrical connection: 230 V, 50 Hz - Filling volume (optimal / maximum): approx. 100 L - Tank / basin material: LDPE plastic (low-density polyethylene) Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 45 kg

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 Iisdpfezvdm Rsx Abnjf with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E13VJ19038039306, This is a VCC (Vario Cooking Center) 112 L with 2 x 25-liter basins, in the Dynamic version – energy-saving due to the reduced connection value (21 kW) – from the premium manufacturer Rational, manufactured in 2019. The VCC is offered including the base cabinet and accessories shown in the pictures. The unit has been completely overhauled in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service center throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning, tested and fully functional. Flexible options for shipping or self-collection. Competent advice – before and after purchase. Provision of operating instructions, connection diagrams, and spare parts. Inspection according to DGUV V3. The Vario Cooking Center MULTIFICIENCY® combines the functions of conventional cooking appliances such as a stove, grill plate, fryer, tilter, and kettle in one unit. Technical data: W x D x H: approx. 1100 x 930 x 1100 mm Power connection: V: 400 / kW: 21 / Hz: 50 Weight: approx. 132 kg Year of manufacture: 2019 Serial number: E13VJ19038039306 Condition: used, completely overhauled, fully functional Additional information: Core temperature sensor VarioDose - Integrated water inlet Integrated water drain Burn protection Non-heated side walls VarioBoost® - Heating system = 200 °C in 2.5 minutes Integrated hose spray Meals per day: 50-100 Usable capacity: 2 x 25 liters Dynamic version - energy-saving due to reduced connection value Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Iijdozl D R Iopfx Abnsf Do you have any questions, would you like to request advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2010, total length: 2,035 mm, total width: 1,035 mm, total height: 1,015 mm, overall weight: 400 kg, For Sale: Conveyor table from Köning Brand: König Type: Conveyor table 800 mm Belt width: 800 mm Conveyor height: 850 mm max Year of manufacture: 2010 It is possible to view this machine on site. If you have any questions, please do not hesitate to contact us. Iodszvfh Aepfx Abnsif Sincerely, Leo Holland

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO Iodpszvcknefx Abnjif • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Ijdpfxjzvcxlo Abneif Total power: 45 kW Operating voltage: 400 V Frequency: 50 Hz Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 23 m/min, total height: 1,500 mm, total length: 3,200 mm, total width: 1,200 mm, overall weight: 1,200 kg, We offer this edge banding machine for shaped components, VITAP ECLIPSE 2.0, in very good condition, manufactured in 2021. Rated voltage: 400 V Frequency: 50 Hz Rated power: 9 kW Air pressure: 6 bar Weight: 1200 kg Dimensions (L × W × H): 3200 × 1200 × 1500 mm Thickness of workpieces: 8–60 mm Feed rate: 9–23 m/min Glue tank capacity: 9 kg Edge banding machine VITAP ECLIPSE 2.0 Device type: FD 21 pro Device number: 120019 P Year of manufacture: 2021 Used device, in very good technical condition, used for one project, used sporadically for over a year, hence the decision to sell. We are interested in selling or exchanging it for a panel saw with a cutting width of 4300 mm (with a price adjustment, of course). Isdpfozuwdgex Abneif Due to the project closure, we are offering for sale: Multi-spindle drilling machine FELDER FD 21 Panel saw HOLZMA OPTIMAT HPP 350 Edge banding machine VITAP ECLIPSE 2.0 The device is connected, fully functional, and can be viewed/tested on-site – Kraków, Rybitwy. The device is designed for edge banding narrow side surfaces of furniture components made of particleboard, plywood, and lumber. The VITAP edge banding machine is ideally suited for edge banding from 1-3 mm. Type: Edge banding - Single-sided edge banding machine Component thickness: 3 mm Edge thickness: 60 mm If you have any questions or need additional information, please send a message or contact us by phone.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system Iodefbt Siopfx Abneif • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Condition: excellent (used), Year of construction: 2015, operating hours: 16,508 h, functionality: fully functional, GF AgieCharmilles CUT 2000 S Wire EDM Machine – Year 2015 – EROWA Tooling Package with a value of 20,000 EUR included!!!! High-precision CNC wire EDM machine from GF AgieCharmilles in very good technical condition. Manufacturer: GF AgieCharmilles Model: CUT 2000 S Year of manufacture: 2015 Travels: X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm Max. workpiece size: 750 × 550 × 250 mm Max. workpiece weight: 400 kg Machine hours: Iedpfx Abozvdv Ejnjif Erosion hours: 16,508 h Technical data: Power supply: 3 x 400 V Machine weight: approx. 3,500 kg Equipment: • Automatic wire threading • CNC control system GF AgieCharmilles • Complete EROWA tooling package included • Multiple EROWA fixtures and clamping elements • Precision EDM tooling and accessories (see photos) Advantages: • Very reliable EDM machine for toolmaking and precision parts • High cutting accuracy and excellent surface finish • Modern GF AgieCharmilles control system Condition: The machine is in good working condition. The machine is still powered and can be inspected and tested while powered. Location: Czech Republic Availability: Immediate

Condition: like new (used), functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 1,500 W, pipe diameter (max.): 120 mm, pipe length (max.): 6,500 mm, warranty duration: 20 months, Equipment: centralized greasing system, cooling unit, emergency stop, Machine model: T-6012 Working size: 6000x120 Laser power: 1500W Raycus Cutting head: Raytool BT220 Details: 1.5kW Raycus Fiber Laser Raytools X4 system control system Working length 6000mm (in reality, the machine is set to a working length of over 6500mm - minimum waste approximately 5cm) Diameter 120mm HCFA servomotor Central lubrication system Computer, monitor Machine control software, nesting software Consumable parts The machine has only been used for a few hours. Iodpfxszvdwio Abnoif Transportation, installation, and commissioning of the machine, as well as training – to be agreed upon. Warranty – May 2028 Net price

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 Iedpjzfyu Aofx Abnsif TECHNICAL DATA - tub capacity: 4.4t - tiltable furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode I - pouring efficiency 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average tub lifespan: 4 – 6 months - furnace equipped with an additional device used to modify liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including bottom-pour stopper - Third group – inductor with power 120 kW, voltage 380 V 50Hz, whose main function is to heat the liquid metal. The inductor is continuously air-cooled during operation. - Fourth group – switchboard with built-in transformer, contactors, and control station. POURING PROCESS The pouring process proceeds as follows: The DISAMATIC 2032 A positions the molds on the conveyor in the correct orientation. The correct position ensures that the open pouring basin in the mold is aligned with the bottom-pour stopper on the bottom of the tub. When the desired position is reached, the operator manually lifts the bottom-pour stopper (using a lever) to fill the mold until the liquid metal is visible in the overflow. The pouring speed of the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer fire-brick lining, where one layer is permanent and the other is expendable. The permanent lining consists of an insulating layer, which is lightweight, burnt stone, and a sillimanite layer. The expendable layer consists of corundum material, i.e., concrete with a high clay content (94%). Both parts are connected by a special cement. The tub inductor is located within a lining made of Al₂O₃ or MgO and SiO₂, depending on the needs. The material used for the bottom-pour stopper is chamotte with varying clay content. The inductor is attached to the pouring furnace with screws and a sealing compound that has adequate plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. tub: approx. 4 – 6 months 2. inductor: approx. 12 weeks Ceramics lifespan depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts do not have direct contact with the liquid metal. PRICE *49,000 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are the responsibility of the Buyer; the price includes the following additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: excellent (used), Year of construction: 2018, 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. Ijdpszvc I Hsfx Abnjif With Sick M4000 Safety Light Curtain, Cosmotec Chiller Unit, Chiller Unit, Internal Camera & Manual. Overall Dimensions L10,600 x W3,450 x H2,185mm. Weight 10,000kg. Note: Machine Has Full Service History Records Since Purchase 2018.

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s Iijdpfjzvdc Ssx Abnsf • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width Iijdpfxsyvgiae Abnof - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 400 mm Travel range Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 rpm Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Ijdpfezul Tcsx Abnjif Operating hours: 10,294 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of the XYZ axes Parameter backup function Retraction cycle for tapping without a compensating chuck MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Threading without a compensating chuck M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycle G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Verification of travel limit before movement Verification of stored travel limit 1 Verification of stored travel limit 2 G22/G23 Customer-specific PMC Real-time customer macro

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup. Iodpfxozvfdwe Abnsif

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Ijdezvd Unspfx Abnsif Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: good (used), axle configuration: 3 axles, first registration: 04/1990, loading space volume: 33 m³, suspension: air, color: silver, Year of construction: 1990, Equipment: ABS, Make axles: SAF Brakes: drum brakes Iijdpfxezvcxre Abnof Empty weight: 9.330 kg Carrying capacity: 28.670 kg GVW: 38.000 kg Number of compartments: 4 Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension = Remarks = Van Hool Tank / 33.280 LT / 4 compartments / ADR / Inox ADR : FL- AT

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Iedpfszt R E Uox Abnjif Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heating element, gas spring, and heater were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (inner diameter) Basket height: 140 mm (inner height) Max. usable height (wash load): 450 mm Max. batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is carried out using a special nozzle system with wide-angle nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation and high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level drops below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and accurate metering of the required amount of water. Internally located return baskets filter out coarse dirt from the washing solution. A fume extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Simple handling of the filling system enables a fast workflow. Loading via crane is possible. Iodpfx Aewzwfgsbneif Price: Negotiable Our asking price is €2,200 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and omissions. Sale is limited to EU countries only.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Ijdpfsztazfox Abnjif Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, color channels: 8, Vutek GS 5000 LXpro LED 5 m UV roll printer with LED lamp Isdpfx Aboyzg Nbjneif Very low noise and quick start-up Resolution: 12pl-1000 dpi Colors: 8C CMYl + Light colors, white (over and under print) Speed up to 224 m²/h Mesh Kit - Fully refurbished with warranty by EFI dealer Available now, end of April.