Used Big Press for sale (27,753)

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 6 Bending length 1020 mm Pressing force 3200 Kn Additional Equipment Backgauge system with 5 axes and control cabinet climate control Upper tool clamping: hydraulic and hardened Fsdpfjx D D Hyex Afnjpb Lower tool clamping: hydraulic CNC Crowning BendGuard safety device Foot switch 2x support consoles, front 1x bending aid with 900 mm parking position Table extension for base table / additional table This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. Application Types Bending

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Fpodpfxox A U Nco Afnjb Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm Fodpfx Afjx Sr Evjnjpb usable table size 800 x 800 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, One-piece prism block for press brake Bending tool for press brake Fsdpfx Afswbvmcsnopb Reversible prism with 6 different prisms Prism sizes: 30 mm with 3 mm radius for 90°, 40 mm with 4.5 mm radius for 90°, 50 mm with 4 mm radius for 90°, 18 mm for 90°, 10 mm for 90°, 12 mm for 45° Dimensions: 90 x 88 mm Prism length: 3000 mm Weight: 147 kg Good condition

Condition: excellent (used), Year of construction: 1988, Rated deformation force kN 630 Stroke mm 10 - 105 Shut height mm 335 Throat mm 315 Fpedpfjx Sqtlex Afnjb Passage mm 355 Slide adjustment mm 70 Number of slide strokes /min 65/130 Slide area mm 450 x 280 Table area mm 800 x 630 Pressure MPa 0,5 Main motor output kW 5,0/7,5 Total input kVA 10,4 Machine dimensions mm 1425 x 1790 x 2550 Machine weight kg 5850

Condition: good (used), Year of construction: 1990, In good technical condition, fully functional. Year of manufacture: 1990. Nominal press force: 63 tons. Table working surface dimensions: 800 x 630 mm. Machine weight approx. 6 tons. Fsdpfx Afjx Sqtfonepb

Condition: used, functionality: fully functional, Year of construction: 1982, overall weight: 5,000 kg, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Weight: 5,000 kg Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Stroke: 100 mm Approach speed: 45 mm/sec Fpedpfx Aex Scv Eofnob Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet)

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Fpodpfx Afovtpq Hensb Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: as good as new (ex-display), The AHK V 30175 CNC - Delem DA58 2D TX is a state-of-the-art press brake in the Press Brakes category, designed to meet the highest standards in modern manufacturing. KNUTH's AHK V CNC series excels in delivering superior quality, precision, and reliability, incorporating advanced design technology and robust construction. This machine boasts a steel frame that enhances rigidity and accuracy, precision-engineered components, and a spacious work area for complex bending sequences. The DELEM graphical touchscreen provides efficient CNC programming tools for seamless control over the bending process. Features like motorized lower crowning and a safety-focused design ensure optimal performance when working with thicker sheet metals. Additionally, the press brake includes robust hydraulic systems and premium components, promising long-lasting reliability. As you consider your options in Press Brakes, you'll find that the AHK V 30175 excels, making it an ideal choice for any shop focusing on sheet metal processing. Request a quote today to learn more about this adaptable and powerful machine tool. Fpsdsv Rbxdjpfx Afnob

Condition: used, New hose assembly machine DAEWOO model DA5100-HC Hydraulic hose crimper, workshop hose crimper For crimping hose fittings Serial number: 25DW05950ALE01 Year of manufacture: 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump delivery rate: 6 L/min Operating capacity: 200 units/hour Hydraulic pressure: 315 bar Motor power: 3 kW Power supply: 400 Volt, 50 Hz - 2 operating modes: manual and automatic - Operation via push button or foot switch - Crimp travel setting via knurled screw - Short changeover times for different hose diameters; jaws are simply slid into guides and held in place magnetically - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement (L x W x H): 700 x 500 x 1250 mm Weight: 270 kg Fpodpox Srwfefx Afneb New - unused

Condition: excellent (used), functionality: fully functional, Manufacturer: MURARO Model: ID500/250 Year: 2001 Condition: Used Stock number: Code 0114 Maximum upper slide pressure: 500 tons Fedpfx Aox R U R Eefnepb Slide stroke: 900 mm Maximum daylight: 1,500 mm Table size: 2,700 x 1,600 mm Slide dimensions: 2,700 x 1,600 mm Blank holder table size: 2,450 x 1,250 mm Approach speed of slide: 650 mm/sec Blank holder cushion – total force: 250 tons Lower blank holder stroke: 400 mm Overall press height from floor: 5,600 mm

Year of construction: 1976, condition: excellent (used), pressing force: 630 t, Manufactured by Voronezh Plant (Russia) Year of manufacture: 1976 Capacity, t: 630 Slide stroke, mm: 320 Strokes per minute: 20 Table size, mm: 1250 x 1250 Slide adjustment, mm: 180 Fpjdpex Thh Ajfx Afneb Max. distance between table and slide, mm: 800 Motor power, kW: 55 Press dimensions, mm: 3200 x 3470 x 6100 Press weight, kg: 51250

Condition: like new (used), shelf length: 3000 mm shelf width: 1300 mm number of pistons: 6 water heating Fpjdpfx Afex Thnionob weight: 3900 kg 400 V clearance: 400 mm CE marking

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Fpedjxpxhvjpfx Afnob Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: as good as new (ex-display), The AHK M 1230 NC incl. AKAS – LC II M is a highly efficient press brake designed for sheet metal processing, offering a modern and cost-effective NC solution for bending tasks. This robust machine combines advanced technology with safety features, allowing for user-friendly operation without the need for CNC programming. Built from stress-relieved welded steel, the AHK M series provides a rigid frame and hydraulic system, which ensures precise upper beam positioning through a torsion shaft connected to the depth stops. Operators can easily manipulate the back gauge in the X- and R-axes via a touchscreen or access stored bending sequences for automatic operations. This model is ideal for producing workpieces with consistent materials and shapes, while its manual quick-action clamping system significantly reduces tool change times. Complimented by features such as an emergency stop switch and a reliable optical safety system, the AHK M 1230 NC press brake is engineered for high productivity and safety. For those looking for a superior press brake, request a quote today and enhance your sheet metal processing capabilities. Fpodpfx Ajv Rbv Aofnjb

Condition: used, Year of construction: 2007, pressing force: 40 t, Technical specifications Fpodpfxex Thf Ie Afneb Maximum pressure: 40 tonnes Year of manufacture: 2007 Pressing force: 63 tonnes/m² Oil tank: 600 l Bale weight: 300–400 kg/m³ Weight: approx. 7.6 tonnes Power supply: 400 V / 15 kW Bale tying: automatic Open hopper allows loading by conveyor belt. Automatic channel light regulation. Automatic wire tying. Selectable bale length. Press plate guided stably on large rollers.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Stock number: 0367 Pressing force: 1,600 tons Fpjdpjx R U Nusfx Afnsb Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, For sale: a well-maintained, semi-automatic 180-ton press with low usage, as shown in the pictures. Fedex Tg Dispfx Afnspb

Condition: excellent (used), machine/vehicle number: WDB9323151K921294, mileage: 451,287 km, power: 324 kW (440.52 HP), first registration: 06/2004, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: semi-automatic, emission class: euro3, suspension: steel, total length: 7,500 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 2004, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction Fpedpjx Tg A Ssfx Afnsb - Open roof - Rear suspension: Leaf - Sper - Thick Axles = More information = Tyre profile: 50% Brakes: drum brakes Front axle 1: Steering; Suspension: leaf suspension Front axle 2: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction; Suspension: leaf suspension Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction; Suspension: leaf suspension Technical condition: very good Visual appearance: very good

Condition: used, functionality: fully functional, Year of construction: 1987, control type: CNC control, Technical condition: Used Bending length: 3100 mm Tonnage: 135T Press brake type: CNC Back gauge: X-axis, R-axis height adjustable (manual) Crowning: no Daylight opening: 325 mm Throat depth: 250 mm Control: ATS 460 Motor power: 15.0 KW Tool clamping: HACO Year of construction: 1987 Total length: 3500 mm Total height: 2100 mm Total depth: 1800 mm Fpodpfox Tgyksx Afneb Weight: 6500 kg Delivery and installation at your location is of course possible, delivery and additional costs upon consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to the sale of sheet metal working machines, we offer a complete package for service, maintenance, and repairs.

Condition: new, The KNWP 50 M is a top-of-the-line manual workshop press designed for various applications in the Workshop Presses category, particularly in the Manual Workshop Press group. Built in Europe, this robust hydraulic press is ideal for assembly, straightening work, and testing workpieces in mechanical workshops, garages, and locksmiths. Its features include a manually operated hydraulic pump with both hand and foot control, a rigid machine frame made from a carefully machined weldment structure, and adjustable table height for enhanced versatility. The 2-step hydraulics allow you to switch between quick-stroke and work stroke effortlessly. This 50-ton press simplifies tasks such as the removal and installation of bearings and bolt pressing while ensuring safe and professional operations. The included material support and multi-function die enhance productivity, making it an essential tool for professionals. For further inquiries and to explore your options, request a quote today. Fpjdpfx Ajuyh Twsfneb

Condition: good (used), Year of construction: 1983, functionality: fully functional, Bürkle U60 Veneer Press Hydraulic Year of manufacture: 1983 The press comes from a training facility and is in good condition. Pressing area: 2200 x 1250 mm Maximum opening: 400 mm 4 cylinders, pressing force: 600 kN Connected load per table heating plate: 7 kW Weight: 3,000 kg Dimensions: 2750 x 1380 x 1785 mm All information without guarantee, errors excepted, all dimensions are approximate. This offer is non-binding. The machine can be inspected by prior arrangement. Subject to prior sale, technical modifications, errors, and changes in specifications, data, and prices. Fpodsx Af Sbjpfx Afnsb All prices are net, plus VAT, payable in advance including any potential freight costs within 14 days after conclusion of contract. In case of incomplete payment within this period, the seller reserves the right to cancel the purchase contract. Sale is only to entrepreneurs as defined in § 14 BGB (German Civil Code). The machine is sold with the exclusion of any warranty for material defects (as-is). This exclusion does not apply to claims for damages from liability for material defects which result from grossly negligent or intentional breach of duty by the seller or its agents, or for injury to life, body, or health. Any existing third-party claims related to defects will be assigned to the buyer. Please understand that I cannot assume any liability for compliance with any applicable or generally required safety regulations of the machine and its components at your site. Compliance with safety requirements is the responsibility of the final operator. All contracts concluded by me are governed exclusively by the law of the Federal Republic of Germany, to the exclusion of CISG (UN Sales Convention). Court of jurisdiction is agreed to be Mannheim.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Condition: Used Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Fpodpfx Afsx R U Idjnob Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 28,138 h, bending force (max.): 100 t, number of axes: 7, Amada HFE 100-3 Fsdox Tgr Hepfx Afnjpb Year of manufacture: 2006 Control system: AMADA OP 2000 Total operating hours: 28,138 h Pressing force: 100 t Maximum bending length: 3,100 mm Distance between frames: 2,700 mm Stroke: 200 mm Axes: 7 Throat depth: 420 mm Free space: 470 mm Machine weight: 6,750 kg Equipment: Amada DIGIPRO angle measuring system This press brake is in good technical condition and has been inspected by us. A powered test is possible in our warehouse.

Condition: as good as new (ex-display), The HPK 100 A is a powerful hydraulic press within the Hydraulic Presses category, part of the broader Presses group. Engineered with a robust C-frame construction, this machine is built in Europe, ensuring high reliability and longevity. Its versatile design allows for seamless operations such as punching, straightening, forming, and drawing, making it a valuable addition to various industry segments. The HPK 100 A features a significant pressure force of 100 tons and a stroke speed of 4 mm/s, ensuring precise and consistent performance. The user-friendly mobile control panel and easy stroke length adjustments offer added convenience, while the integrated safety standards guarantee operator security. Whether for testing or batch production, this hydraulic press can be tailored to meet specific requirements, with possibilities for Industry 4.0 integration. For those looking for a robust solution in hydraulic presses, you can order online to enhance your production capabilities today. Fpodpoq R Rk Dofx Afnsb