Used Big Press for sale (28,767)

Condition: excellent (used), functionality: fully functional, empty load weight: 11,025 kg, operation weight: 16,700 kg, lifting height: 29,200 mm, next inspection (TÜV): 06/2025, Year of construction: 2022, operating hours: 1,400 h, load capacity: 9,715 kg, Equipment: crane, Crawler crane Big Lift CWE 315 with electric motor, cable winch and jib with 4 hydraulic extensions. Dsdpfx Aju Nwdwsduowc Crane basket for 2 persons, 200 kg capacity very good condition

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING Dodpfxoh Rkhne Aduewc AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,331 h, machine/vehicle number: 24463, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 350 mm, throat depth: 450 mm, back gauge: 800 mm, TECHNICAL DETAILS Bending force: 200 t Distance between columns: 2,550 mm Throat depth: 450 mm Backgauge: 800 mm Max. working width: 3,100 mm Max. stroke: 350 mm MACHINE DETAILS Control: Delem DA-69T (controlled axes: Y1, Y2, X, R, Z1, Z2 + crowning) Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,300 x 2,970 mm Weight: 10,000 kg Dwedpfx Adoxgdnpjusc Motor power: 18.5 kW Operating hours: 4,331 h EQUIPMENT Quick-release system Extra fingers Including tools Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller manufacturer: Cybelec, working width: 4,100 mm, pressing force: 225 t, TECHNICAL DETAILS Pressure: max. 225 t Folding length: max. 4,100 mm Stroke: max. 265 mm Total output: 18.5 kW Control: Cybelec Machine weight: approx. 21,500 kg EQUIPMENT Dwedpfxsxhd Rmo Adujc - Lower beam crowning for precise bending processes. - 2 manual support arms - 2-hand foot switch

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 10883, working width: 3,550 mm, stroke length: 250 mm, pressing force: 130 t, operating pressure: 310 bar, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Table width: 120 mm Column width: 3,050 mm Installation height: 510 mm Throat: 320 mm Stroke: 250 mm Working height: 900 mm Slide speed, empty down: 120 mm/s Slide speed, full press: 11.5 mm/s Slide speed reduced: preselectable Slide speed up: 100 mm/s Control & Axes Control: Cybelec DNC 80 Axes: Y1, Y2, X, R MACHINE DETAILS Machine weight: approx. 12,000 kg Space requirement: approx. 4,050 x 2,100 x 2,850 mm Operating pressure: 310 bar Oil capacity: 250 l EQUIPMENT - Die shifting with handwheel - 4 stop fingers Dwodoxf Au Eopfx Adujc - Hydraulic WILA punch clamp - Hydraulic AMADA die clamp - 2 support arms - Safe two-hand/foot operation - Various punches and dies

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Dsdpfx Aexgt Tzoduswc Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: used, functionality: fully functional, operating hours: 15,000 h, machine/vehicle number: Model 0408, pressing force: 150 t, this is a mould clamp for Polyurethane RRIM moulding, top and bottomPlatens tilt 35 degrees each, Platens open gap for mould is 2040mm, Platens closed gap is 650mm Platen size is Dwedpfowgkr Dsx Aduoc

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: Geo Knight Maxi - Press, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such Dedpfx Aov Dm Udjduewc as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 Dwsdpfx Aowq Ay Ieduec 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: used, Year of construction: 1986, Technical details: pressure: 63 t no. of strokes: 65 / 130 Hub/min throat: 315 mm ram adjustment: 60 mm ram stroke: 10 - 105 mm distance between table / ram: 335 mm distance between columns: 355 mm Dedpfeu N Dafex Adujwc clamping plate: 800 x 610 x 85 mm ram surface area: 450 x 280 mm compressed air: 9 bar control voltage: 24V / 50Hz V total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimension machine xH: 1,42 x 1,8 x 2,6 m Control via foot pedal *

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 15200 kg Main Drive Pressing force 2000 kN General Data Machine weight 15200 kg Dwodpfx Adoxmbztjujc Main Drive Pressing force 2000 kN This LAUFFER DK 200 was manufactured in 2007. A robust hydraulic stamping press with a pressing force of 2000 kN and a retraction force of 243 kN. It features a maximum stroke of 320 mm and operates at a work pressure of 249 bar. Weighing 15,200 kg, consider the opportunity to buy this LAUFFER DK 200 hydraulic stamping press. Contact us for further details regarding this machine. Application Types Stamping

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness 1000 390 60 mm Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Djdsxl Tmfopfx Aduowc Foot pedal Stroke limitation via limit switch

Condition: used, Year of construction: 2007, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, pressing force: 1,000 t, space requirement length: 16,000 mm, power: 190 kW (258.33 HP), controller manufacturer: SIEMENS, controller model: S7 300, lifting height: 205 mm, load capacity: 6,000 kg, coil weight: 6,000 kg, coil width: 520 mm, number of straightening rollers: 8, product height (max.): 12 mm, product width (max.): 520 mm, stroke length: 205 mm, table length: 900 mm, CONTROLS .. SIEMENS S7 300 PRESS DESIGN .. drive system: hydraulic .. frame design: H-frame, monoblock .. quick die change system: yes .. feedstock transport direction: left to right SLIDE .. total force (nominal): 1000 to .. stroke: 205 mm Dwsdpfxoxl H Ips Aduoc SLIDE (HYDR. PRESS) .. working velocity min.: 10 mm/s .. working velocity max.: 30 mm/s COUNTER RAM .. nominal force: 160 to V-RING .. nominal force: 400 to TOOL DIMENSIONS .. lower table (left-right): 900 mm .. lower table (front-back): 900 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 520 mm .. sheet thickness max.: 12 mm .. coil weight max.: 6 to .. feed velocity max.: 93 m/min .. feedstock transport direction: left to right LEVELLER UNIT .. number of leveller rolls: 8 .. diameter of leveller rolls: 90 mm .. diameter of feed rolls: 110 mm STRIP-FEEDER .. feeder type: grip feeder .. sheet width max.: 520 mm .. sheet thickness max.: 40 mm .. nominal force: 18 kN .. band support rolls: yes CROP SHEAR .. cutting force: 1050 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 190 kW DIMENSIONS / WEIGHTS .. space requirements -left/right-: 16000 mm ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. closed cabin: yes .. decoiler: yes .. leveller unit: yes .. waste cutter: yes SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12

Condition: used, Eccentric press, 20 ton eccentric press, for sale in excellent condition Dedpfx Aeuf Aytsduowc Year of manufacture: 1978 Pressure: 20 tons Table size: 500x300 mm Stroke length: 170+30 mm 7.5kW, 15A, 400V, 50Hz The brake casting is broken (in the photos), so it works continuously. It can be repaired!!

Condition: good (used), Manufacture: Digép Type: SD63 Dodpfeiukrrox Adujwc Push force: 63t Table: 560 x 740 mm Stroke length: 200 mm Net weight: 4t

Condition: used, Eccentric press, 5 ton eccentric press, for sale in excellent condition Dodpfx Aouf Av Uedujwc pressing force: 5 tons table size: 260x210 mm stroke length: 130 mm 3kW, 400V 50Hz

Condition: good (used), DIGÉP SD25 tilting round press, eccentric press machine 25t Manufacturer: DIGÉP Type: SD-25 Table: 380 x 515 mm Dwedetrww Eepfx Aduoc Stroke length: 10-90mm Weight approx. 1.9t

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Dwedpfx Aeh Dy Rfodusc Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, overall weight: 19,000 kg, pressing force: 160 t, type of input current: three-phase, power: 15 kW (20.39 HP), punching force: 160 t, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 235-335mm Dwedpfx Adsu D Ad Eeujc Table size: 2030x600mm Bear size: 1500x600mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with sheet feeder and straightener.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Dwsdpfx Adsu Dxb Tousc Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, compressed air connection: 5 bar, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw Djdpsu Haqhjfx Adujwc machine weight: 6350 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressing force: 10 t, table width: 430 mm, table length: 440 mm, operating speed: 260 mm/s, overall weight: 800 kg, type of input current: three-phase, stroke length: 200 mm, oil tank capacity: 46 l, Equipment: documentation/manual, safety light barrier, J.A.M "Japan" made 10 ton hydraulic press for sale in excellent condition. Manufacturer JAM HYP-1000 model Model year 1995 Capacity 98KN (10t) Stroke length 200 mm Open height: 395 mm Table size 440 × 430 mm Punch hole φ32 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 19 mm/s Ram return speed: 219mm/s With light safety device Two-handed operation. Djdpfx Asvbfkreduswc Voltage 3 phase 200v 1.5kw Press body weight: 800kg Operating oil: 43 liters Height (mm) 1395 Width (mm) 700 Depth (mm) 1170 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 1990, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, reverse speed: 360 mm/s, type of input current: three-phase, working height: 385 mm, stroke length: 150 mm, input voltage: 200 V, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 Dwodpfjwin Emex Aduoc If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, total height: 860 mm, pressing force: 1 t, overall weight: 105 kg, total width: 400 mm, table width: 200 mm, table length: 230 mm, type of input current: AC, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Dwjdpfxjv E Saze Aduoc Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, table height: 360 mm, table width: 810 mm, pressing force: 45 t, Manufacturer: AIDA Type: NC1-45 Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Distance above table:: (adjustable) 240-300mm Table size: 810x360 Djdpfx Asu Dkc Asduswc Bear size: 410x340 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Net weight: 3300kg Size: 980x1480x2275mm